Hi, another new member on the list. My gear: latest tools (binutils, gcc,avr-libc, uisp/avrdude) on Mandriva Linux 2007.0. All seems to work very well but it is quite different from CodeVisionAVR which I use under windows ;-). I switched to avrdude because uisp cannot talk to the STK500 since the upgrade to V2.
I hit a problem (I think) with avrdude 5.2. After successfully programming/testing a 8515 in my STK500 (with latest firmware V2), I tried a mega163. Unfortunately avrdude refused to accept this one and backed out with a avrdude_command() rc=-1 error. I went back to AVRstudio 4 on windows and had no problems whathsoever with this same STK500 and this same mega163. I call avrdude with no other options than the device (atmega163), port (/dev/ttyS0) and programmer (stk500v2) -U flash:w:<file.srec>. Clk = 3,686 MHz ISP 115 KHz. I called avrdude again with -u and -v -v but that gave no clue to a solution. It seems not able to obtain the chip signature. AVRstudio4 again works fine; signature and fuses seem normal. Is there a known problem with mega163? TIA Egbert Jan (NL)
smime.p7s
Description: S/MIME cryptographic signature
_______________________________________________ avrdude-dev mailing list [email protected] http://lists.nongnu.org/mailman/listinfo/avrdude-dev
