Hi there
As I am using avrdude on MacOS X, I may volunteer to check it out on
the PC-based platform (Intel-based at a later point of time).
However, since I'm not reading this mail list's posts in detail, I
need a briefing from someone what to be tested:
- software (which version, patch) to compile and which scenario to run?
- specific hardware, CP210x USB chip? To date I am using only a
STK500v2 compatible programmer based on TDI chip (available from
www.chip45.com) I have USB/RS232 converters based on CP210x but no
serial programmer that I could connect behind the converter...
Cheers RAPHAEL
Am 19.04.2007 um 02:26 schrieb Eric Weddington:
-----Original Message-----
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
rg] On Behalf Of Joerg Wunsch
Sent: Wednesday, April 18, 2007 2:36 PM
To: [email protected]
Cc: Axel Wachtler; Brian Dean
Subject: [avrdude-dev] ser_posix.c: is select()ing for the
write descriptoruseful at all?
A fellow worker recently stumbled across avrdude not working
against a
bootloader that was behind one of these Silabs CP210x USB/RS-232
bridges under Linux.
Hallo Axel! ;-)
Would anybody terribly mind removing that piece of code?
I assume that you guys already tested the patch on Linux and
FreeBSD? Can we
get someone to test it on Mac OS X? (I also assume the same code is
valid
for that OS.) Perhaps one of the guys over at the osxavr project
(on SF) can
give it a quick run through.
Eric Weddington
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
________________________________________________
Raphael Schumacher, Rütimeyerplatz 6, CH-4054 Basel
phone +41 61 321 9339 / mobile +41 79 445 3993
[EMAIL PROTECTED]
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
