URL:
<http://savannah.nongnu.org/bugs/?20950>
Summary: Error while writing to an ATMega8 with avr910
programmer
Project: AVR Downloader/UploaDEr
Submitted by: None
Submitted on: Samstag 01.09.2007 um 10:44 UTC
Category: None
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: None
Status: None
Privacy: Public
Assigned to: None
Originator Name: Georg Richter
Originator Email: [EMAIL PROTECTED]
Open/Closed: Open
Discussion Lock: Any
_______________________________________________________
Details:
I'm using WinAVR 20070525 and AVRdude 5.3.1 (at least I do think so).
While trying to write a program to an ATMega8 via the avr910 programmer
occurs an error: "Programmer doesn't support device", it says. But it does -
I've found the error's source. In the avrdude.conf on line 5298 for the
ATMega8 is written "avr910_devcode = 0x77;", but the adress must be "0x76".
77 is only for the avr109 programmer (says google^^). If you correct this
value it will work out without any problems.
no dramatic bug, just a little error - would be great if you may correct it
with the next avrdude and WinAVR versions!
PS: Sorry for my bad english, I'm just a german pupil.
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?20950>
_______________________________________________
Nachricht geschickt von/durch Savannah
http://savannah.nongnu.org/
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
