Follow-up Comment #1, bug #27207 (project avrdude):
I just tried the arduino isp and it also is very slow, is this maybe releated
to the AT90S2313 and the missing PAGEL and BS2?
Thanks,
Markus
avrdude -s -U HIDKeys.hex -c avrisp -p 2313 -P /dev/ttyUSB0 -b 19200
avrdude: please define PAGEL and BS2 signals in the configuration file for
part AT90S2313
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.13s
avrdude: Device signature = 0x1e9101
avrdude: NOTE: FLASH memory has been specified, an erase cycle will be
performed
To disable this feature, specify the -D option.
avrdude: erasing chip
avrdude: please define PAGEL and BS2 signals in the configuration file for
part AT90S2313
avrdude: reading input file "HIDKeys.hex"
avrdude: input file HIDKeys.hex auto detected as Intel Hex
avrdude: writing flash (1928 bytes):
Writing | ################################################## | 100% 245.38s
avrdude: 1928 bytes of flash written
avrdude: verifying flash memory against HIDKeys.hex:
avrdude: load data flash data from input file HIDKeys.hex:
avrdude: input file HIDKeys.hex auto detected as Intel Hex
avrdude: input file HIDKeys.hex contains 1928 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 82.08s
avrdude: verifying ...
avrdude: 1928 bytes of flash verified
avrdude done. Thank you.
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?27207>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
