Follow-up Comment #10, bug #27254 (project avrdude):
Hi Klaus
I will try different clock speeds and see what happens.
When I drop to below 57600bps, then all works fine with AVRDUDE.
At 57600bps problems start and I get failures around 80% of the time.
At 115200 no programming can be done.
The CPU clock is 2MHz. I will try 32MHz and see if there is a difference.
One thing to note is that I am using the App note AVR1605 which is supposed
to be the same as AVR911 but ported to work for the XMega. I wonder if there
were problems with the porting from AVR911 to AVR1605. I will check it out and
provide feedback as well.
Best regards
Priyend
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?27254>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
