URL:
<http://savannah.nongnu.org/bugs/?30451>
Summary: Accessing some Xmega memory sections gives not
supported error
Project: AVR Downloader/UploaDEr
Submitted by: None
Submitted on: Wed 14 Jul 2010 11:17:48 PM UTC
Category: None
Severity: 3 - Normal
Priority: 5 - Normal
Item Group: None
Status: None
Privacy: Public
Assigned to: None
Originator Name: Jan Tichavský
Originator Email: [email protected]
Open/Closed: Open
Discussion Lock: Any
_______________________________________________________
Details:
I have tried reading and writing all the Xmega memory sections listed in part
command and also in the manual. Four of them returns not supported error:
lock, prodsig, apptable, application. The rest works fine. I've found one
other report of this problem in mailing list in February, without reply.
If I get it right the application + apptable section are same as whole flash
section, so there is workaround possible. But no access to prodsig
(calibration and factory data) and lock is more problematic.
I used avrdude 5.10 with Dean Camera's AVRISP-MKII clone programmer firmware
(-c avrisp2). I verified with the programmer author that those sections are
accessible from AVR Studio.
_______________________________________________________
File Attachments:
-------------------------------------------------------
Date: Wed 14 Jul 2010 11:17:48 PM UTC Name: avrdude-xmega_bugreport Size:
3kB By: None
List of memory sections from part command and the errors
<http://savannah.nongnu.org/bugs/download.php?file_id=20980>
_______________________________________________________
Reply to this item at:
<http://savannah.nongnu.org/bugs/?30451>
_______________________________________________
Message sent via/by Savannah
http://savannah.nongnu.org/
_______________________________________________
avrdude-dev mailing list
[email protected]
http://lists.nongnu.org/mailman/listinfo/avrdude-dev
