As Daniel Schulz wrote: > But I couldnt figure it out to get it working with my 2232_D_ because > in my eyes the description was for an 2232_H_ only.
No, all the URLs you can find in avrdude.conf refer to FT2232C/D devices. > In the avrdude.conf I can read, that I have to use the pins 1 to 4 of > lower ACBUS and 5 to 8 as higher ACBUS . But in the datasheet of the > 2232D I notice only ACBUS 0 to 3 and they are named GPIO_Hx_ (I think > "higher" nibble?). Should it work with the 2232D? I think the description in avrdude.conf simply has confused ACBUS and ADBUS: the MPSSE signals are ADBUS[0:3], see table 3.5.5 in the FT2232D datasheet. > So as far as I understand, the functionality with LEDs is limited to > the FT2232_H_ only?! Nope, the LEDs would have to be attached to ADBUS[4:7] which are GPIOL[0:3] in MPSSE mode. -- cheers, J"org .-.-. --... ...-- -.. . DL8DTL http://www.sax.de/~joerg/ NIC: JW11-RIPE Never trust an operating system you don't have sources for. ;-) _______________________________________________ avrdude-dev mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/avrdude-dev
