Hi,
I am unable to work on a project which uses an ATmega644P part
because avrdude behaves strange.
1) it wont exit after processing all operations, all the time I have
to use Ctrl+C
2) it is not able to erase the chip:
$ avrdude -p atmega644p -c usbmega-ft232rq -P usb -e -b 1200 -vvvv
avrdude: Version 6.0rc1, compiled on Jun 25 2013 at 14:40:36
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2009 Joerg Wunsch
System wide configuration file is "/usr/local/etc/avrdude.conf"
User configuration file is "/home/daniel/.avrduderc"
Using Port : usb
Using Programmer : usbmega-ft232rq
Overriding Baud Rate : 1200
avrdude: <unknown>: Pin is ok.
avrdude: VCC: Pin is ok.
avrdude: BUFF: Pin is ok.
avrdude: RESET: Pin is ok.
avrdude: SCK: Pin is ok.
avrdude: MOSI: Pin is ok.
avrdude: MISO: Pin is ok.
avrdude: ERRLED: Pin is ok.
avrdude: RDYLED: Pin is ok.
avrdude: PGMLED: Pin is ok.
avrdude: VFYLED: Pin is ok.
ft245r: spi bitclk 1200 -> ft baudrate 2400
AVR Part : ATmega644P
Chip Erase delay : 9000 us
PAGEL : PD7
BS2 : PA0
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 200
StabDelay : 100
CmdexeDelay : 25
SyncLoops : 32
ByteDelay : 0
PollIndex : 3
PollValue : 0x53
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
eeprom 65 10 128 0 no 2048 8 0 9000
9000 0xff 0xff
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
flash 33 6 256 0 yes 65536 256 256 4500
4500 0xff 0xff
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
lock 0 0 0 0 no 1 0 0 9000
9000 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
lfuse 0 0 0 0 no 1 0 0 9000
9000 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
hfuse 0 0 0 0 no 1 0 0 9000
9000 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
efuse 0 0 0 0 no 1 0 0 9000
9000 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
signature 0 0 0 0 no 3 0 0 0
0 0x00 0x00
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
calibration 0 0 0 0 no 1 0 0 0
0 0x00 0x00
Programmer Type : ftdi_syncbb
Description : USB ATMEGA module with FT232RQ
Pin assignment : 0..7 = DBUS0..7
VCC = (not used)
BUFF = ~7
RESET = 4
SCK = 3
MOSI = 5
MISO = 6
ERR LED = (not used)
RDY LED = (not used)
PGM LED = (not used)
VFY LED = (not used)
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e960a
avrdude: safemode read 1, lfuse value: ff
avrdude: safemode read 2, lfuse value: ff
avrdude: safemode read 3, lfuse value: ff
avrdude: safemode: lfuse reads as FF
avrdude: safemode read 1, hfuse value: d9
avrdude: safemode read 2, hfuse value: d9
avrdude: safemode read 3, hfuse value: d9
avrdude: safemode: hfuse reads as D9
avrdude: safemode read 1, efuse value: ff
avrdude: safemode read 2, efuse value: ff
avrdude: safemode read 3, efuse value: ff
avrdude: safemode: efuse reads as FF
avrdude: erasing chip
avrdude: Program enable command not successful. Retrying.
avrdude: Program enable command not successful. Retrying.
avrdude: Program enable command not successful. Retrying.
avrdude: Program enable command not successful. Retrying.
avrdude: Device is not responding to program enable. Check connection.
^C
_______________________________________________
avrdude-dev mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avrdude-dev
