Am 17.01.2014 um 10:16 schrieb Jon Schneider <[email protected]>: > Here is some output. I have 'scoped it. nRESET, MOSI, and SCK are being > wiggled but I don't see anything on MISO. Ok. You can use -b to set the frequency. The default is 150kHz, which is usually unproblematic, but bad cabling may require a slower connection. Give -b 10000 a try. Also use short cables and a low inductance ground return.
How (fast) is the ATtiny clocked? Beware that the SPI-frequency must be (well) below of 1/4 of the oscillator frequency. Best regards, Hannes _______________________________________________ avrdude-dev mailing list [email protected] https://lists.nongnu.org/mailman/listinfo/avrdude-dev
