Hello !
I'm having a very frustrating problem with avrdude 6.1...
I'm trying to program my ATXmega192a3u chip with a ATMEL ICE CMSIS/DAP in
PDI mode, but for some reason I am unable to write in the flash memory (or
boot, application, apptable) when using avrdude.
What I have managed to already do :
program my chip with Atmel Studio 6.2 on a Virtual Machine on the same
computer (with the exact same setup).
write in the EEPROM and fuses of the ATXmega192a3u in terminal mode (and
also in command mode) with avrdude.
read/verify from the ATXmega192a3u (previously programmed successfully with
Atmel Studio 6.2) into a .hex file (writing in a .elf file is not
supported).
program a ATXmega8E5 chip with avrdude (that is on the same board as the
x192a3u chip) without any error.
But now I really want avrdude to work for my chip (in order to write a .sh
script to program several chips on my board at once in an automatic way) !
The command I use is this one :
sudo avrdude -v -p x192a3u -c atmelice_pdi -e -u \
-U
fuse0:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
fuse1:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
fuse2:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
fuse4:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
fuse5:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
boot:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
application:w:"/home/mobirider/Projects/atmel-mobirider/Debug/atmel-mobirider.hex":i
\
The error message is as follows :
avrdude: reading input file
"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf"
avrdude: writing boot (8180 bytes):
Writing | | 0% 0.00s
avrdude: jtag3_edbg_send(): Fragmentation not (yet) implemented!
avrdude: jtag3_edbg_recv(): Unexpected response 0x81, 0x00
avrdude: write memory command: timeout/error communicating with programmer
(status -1)
Writing | ################################################## | 100% 9.60s
avrdude: 8180 bytes of boot written
avrdude: verifying boot memory against
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: load data boot data from input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf
contains 8180 bytes
avrdude: reading on-chip boot data:
Reading | ################################################## | 100% 0.09s
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
0xff != 0xfd
avrdude: verification error; content mismatch
avrdude done. Thank you.
I have tried also replacing "boot" and "application" by "flash" or
"apptable" but the result is the same...
Writing a .elf file or a .hex file fails all the same...
In terminal mode I attempted to write some data byte per byte but the
result was also a failure :
$sudo avrdude -v -p x192a3u -c atmelice_pdi -t
avrdude: Version 6.1, compiled on Nov 23 2014 at 21:15:32
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/mobirider/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : usb
Using Programmer : atmelice_pdi
avrdude: usbdev_open(): Found Atmel-ICE CMSIS-DAP, serno: J41800018102
avrdude: Found CMSIS-DAP compliant device, using EDBG protocol
AVR Part : ATxmega192A3U
Chip Erase delay : 0 us
PAGEL : P00
BS2 : P00
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 0
StabDelay : 0
CmdexeDelay : 0
SyncLoops : 0
ByteDelay : 0
PollIndex : 0
PollValue : 0x00
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------
----- ----- ---------
signature 0 0 0 0 no 3 0 0
0 0 0x00 0x00
prodsig 0 0 0 0 no 50 50 0
0 0 0x00 0x00
fuse1 0 0 0 0 no 1 0 0
0 0 0x00 0x00
fuse2 0 0 0 0 no 1 0 0
0 0 0x00 0x00
fuse4 0 0 0 0 no 1 0 0
0 0 0x00 0x00
fuse5 0 0 0 0 no 1 0 0
0 0 0x00 0x00
lock 0 0 0 0 no 1 0 0
0 0 0x00 0x00
data 0 0 0 0 no 0 0 0
0 0 0x00 0x00
eeprom 0 0 0 0 no 2048 32 0
0 0 0x00 0x00
application 0 0 0 0 no 196608 512 0
0 0 0x00 0x00
apptable 0 0 0 0 no 8192 512 0
0 0 0x00 0x00
boot 0 0 0 0 no 8192 512 0
0 0 0x00 0x00
flash 0 0 0 0 no 204800 512 0
0 0 0x00 0x00
usersig 0 0 0 0 no 512 512 0
0 0 0x00 0x00
fuse0 0 0 0 0 no 1 0 0
0 0 0x00 0x00
Programmer Type : JTAGICE3_PDI
Description : Atmel-ICE (ARM/AVR) in PDI mode
ICE hardware version: 0
ICE firmware version: 1.22 (rel. 65)
Serial number :
J418000181028102��������������������������������������������������������������������������������������������������������������������
Vtarget : 3.27 V
JTAG clock megaAVR/program: 1000 kHz
JTAG clock megaAVR/debug: 1000 kHz
JTAG clock Xmega: 1000 kHz
PDI clock Xmega : 1000 kHz
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e9744
avrdude> dump flash 0 16
>>> dump flash 0 16
0000 0c 94 79 08 0c 94 f4 28 0c 94 1e 29 0c 94 48 29 | .y. ..( ..) .H)|
avrdude> write flash 0 1 2 3 4 5
>>> write flash 0 1 2 3 4 5
avrdude (write): error writing 0x01 at 0x00000 cell=0x0c
avrdude (write): error writing 0x02 at 0x00001 cell=0x94
avrdude (write): error writing 0x03 at 0x00002 cell=0x79
avrdude (write): error writing 0x04 at 0x00003 cell=0x08
avrdude (write): error writing 0x05 at 0x00004 cell=0x0c
However I found that this might not work because it is currently not
supported (as read from the 4th problem in
http://www.nongnu.org/avrdude/user-manual/avrdude_20.html)
I tried checking the syslog for some useful information, I came accross
this when I execute my program for the first time after plugging the
programmer via USB :
usb 2-1.3.4: new high-speed USB device number 65 using ehci-pci
usb 2-1.3.4: New USB device found, idVendor=03eb, idProduct=2141
usb 2-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 2-1.3.4: Product: Atmel-ICE CMSIS-DAP
usb 2-1.3.4: Manufacturer: Atmel Corp.
usb 2-1.3.4: SerialNumber: J41800018102
hid-generic 0003:03EB:2141.0071: hiddev0,hidraw1: USB HID v1.11 Device
[Atmel Corp. Atmel-ICE CMSIS-DAP] on usb-0000:00:1d.0-1.3.4/input0
usb 2-1.3.4: usbfs: interface 0 claimed by usbhid while 'avrdude' sets
config #1
I attached in a .txt file the avrdude operations I did with a little bit
more information than written above : you will find inside the failed
attempt to program the x192a3u, the successful attempt to program the x8e5
and the failed attempt to write in the flash memory in terminal mode.
Also, another info about the configuration I have (when running ./configure
in the avrdude directory) :
Configuration summary:
----------------------
DO HAVE libelf
DO HAVE libusb
DO HAVE libusb_1_0
DON'T HAVE libftdi1
DO HAVE libftdi
DON'T HAVE libhid
DO HAVE pthread
DISABLED doc
ENABLED parport
DISABLED linuxgpio
Do you know where the problem could possibly come from ? I have not found
any answers for this problem anywhere on forums...
The problem is most definitely a compatibility issue between the chip, the
programmer, avrdude 6.1, but I have not found any solution for now
(although I have been searching for days !).
Any information would be a really great help !
PS : I also posted a message on the forum AVRfreaks.
Thanks in advance.
John
*********************************************************************************
***************************FAILURE WITH
ATXMEGA192a3u****************************
*********************************************************************************
$sudo avrdude -v -p x192a3u -c atmelice_pdi -e -u \
-U
fuse0:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
fuse1:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
fuse2:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
fuse4:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
fuse5:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
boot:w:"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf":e
\
-U
application:w:"/home/mobirider/Projects/atmel-mobirider/Debug/atmel-mobirider.hex":i
\
avrdude: Version 6.1, compiled on Nov 23 2014 at 21:15:32
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/mobirider/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : usb
Using Programmer : atmelice_pdi
avrdude: usbdev_open(): Found Atmel-ICE CMSIS-DAP, serno: J41800018102
avrdude: Found CMSIS-DAP compliant device, using EDBG protocol
AVR Part : ATxmega192A3U
Chip Erase delay : 0 us
PAGEL : P00
BS2 : P00
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 0
StabDelay : 0
CmdexeDelay : 0
SyncLoops : 0
ByteDelay : 0
PollIndex : 0
PollValue : 0x00
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
signature 0 0 0 0 no 3 0 0 0
0 0x00 0x00
prodsig 0 0 0 0 no 50 50 0 0
0 0x00 0x00
fuse1 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse2 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse4 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse5 0 0 0 0 no 1 0 0 0
0 0x00 0x00
lock 0 0 0 0 no 1 0 0 0
0 0x00 0x00
data 0 0 0 0 no 0 0 0 0
0 0x00 0x00
eeprom 0 0 0 0 no 2048 32 0 0
0 0x00 0x00
application 0 0 0 0 no 196608 512 0 0
0 0x00 0x00
apptable 0 0 0 0 no 8192 512 0 0
0 0x00 0x00
boot 0 0 0 0 no 8192 512 0 0
0 0x00 0x00
flash 0 0 0 0 no 204800 512 0 0
0 0x00 0x00
usersig 0 0 0 0 no 512 512 0 0
0 0x00 0x00
fuse0 0 0 0 0 no 1 0 0 0
0 0x00 0x00
Programmer Type : JTAGICE3_PDI
Description : Atmel-ICE (ARM/AVR) in PDI mode
ICE hardware version: 0
ICE firmware version: 1.22 (rel. 65)
Serial number : J418000181028102
Vtarget : 3.31 V
JTAG clock megaAVR/program: 1000 kHz
JTAG clock megaAVR/debug: 1000 kHz
JTAG clock Xmega: 1000 kHz
PDI clock Xmega : 1000 kHz
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e9744
avrdude: erasing chip
avrdude: reading input file
"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf"
avrdude: writing fuse0 (1 bytes):
Writing | ################################################## | 100% 0.01s
avrdude: 1 bytes of fuse0 written
avrdude: verifying fuse0 memory against
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: load data fuse0 data from input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf contains 1
bytes
avrdude: reading on-chip fuse0 data:
Reading | ################################################## | 100% 0.00s
avrdude: verifying ...
avrdude: 1 bytes of fuse0 verified
avrdude: reading input file
"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf"
avrdude: writing fuse1 (1 bytes):
Writing | ################################################## | 100% 0.01s
avrdude: 1 bytes of fuse1 written
avrdude: verifying fuse1 memory against
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: load data fuse1 data from input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf contains 1
bytes
avrdude: reading on-chip fuse1 data:
Reading | ################################################## | 100% 0.00s
avrdude: verifying ...
avrdude: 1 bytes of fuse1 verified
avrdude: reading input file
"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf"
avrdude: writing fuse2 (1 bytes):
Writing | ################################################## | 100% 0.01s
avrdude: 1 bytes of fuse2 written
avrdude: verifying fuse2 memory against
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: load data fuse2 data from input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf contains 1
bytes
avrdude: reading on-chip fuse2 data:
Reading | ################################################## | 100% 0.00s
avrdude: verifying ...
avrdude: 1 bytes of fuse2 verified
avrdude: reading input file
"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf"
avrdude: writing fuse4 (1 bytes):
Writing | ################################################## | 100% 0.01s
avrdude: 1 bytes of fuse4 written
avrdude: verifying fuse4 memory against
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: load data fuse4 data from input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf contains 1
bytes
avrdude: reading on-chip fuse4 data:
Reading | ################################################## | 100% 0.00s
avrdude: verifying ...
avrdude: 1 bytes of fuse4 verified
avrdude: reading input file
"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf"
avrdude: writing fuse5 (1 bytes):
Writing | ################################################## | 100% 0.01s
avrdude: 1 bytes of fuse5 written
avrdude: verifying fuse5 memory against
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: load data fuse5 data from input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf contains 1
bytes
avrdude: reading on-chip fuse5 data:
Reading | ################################################## | 100% 0.00s
avrdude: verifying ...
avrdude: 1 bytes of fuse5 verified
avrdude: reading input file
"/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf"
avrdude: writing boot (8180 bytes):
Writing | | 0% 0.00savrdude:
jtag3_edbg_send(): Fragmentation not (yet) implemented!
avrdude: jtag3_edbg_recv(): Unexpected response 0x81, 0x00
avrdude: write memory command: timeout/error communicating with programmer
(status -1)
Writing | ################################################## | 100% 9.60s
avrdude: 8180 bytes of boot written
avrdude: verifying boot memory against
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: load data boot data from input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf:
avrdude: input file
/home/mobirider/Projects/atmel-bootloader/Debug/atmel-bootloader.elf contains
8180 bytes
avrdude: reading on-chip boot data:
Reading | ################################################## | 100% 0.09s
avrdude: verifying ...
avrdude: verification error, first mismatch at byte 0x0000
0xff != 0xfd
avrdude: verification error; content mismatch
avrdude done. Thank you.
*********************************************************************************
*****************************SUCCESS WITH
ATXMEGA8E5*****************************
*********************************************************************************
$sudo avrdude -v -c atmelice_pdi -p x8e5 -U
flash:w:/home/mobirider/Projects/atmel-rachseeker/Debug/atmel-rachseeker.elf:e
avrdude: Version 6.1, compiled on Nov 23 2014 at 21:15:32
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/mobirider/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : usb
Using Programmer : atmelice_pdi
avrdude: usbdev_open(): Found Atmel-ICE CMSIS-DAP, serno: J41800018102
avrdude: Found CMSIS-DAP compliant device, using EDBG protocol
AVR Part : ATxmega8E5
Chip Erase delay : 0 us
PAGEL : P00
BS2 : P00
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 0
StabDelay : 0
CmdexeDelay : 0
SyncLoops : 0
ByteDelay : 0
PollIndex : 0
PollValue : 0x00
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
signature 0 0 0 0 no 3 0 0 0
0 0x00 0x00
prodsig 0 0 0 0 no 50 50 0 0
0 0x00 0x00
fuse1 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse2 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse4 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse5 0 0 0 0 no 1 0 0 0
0 0x00 0x00
lock 0 0 0 0 no 1 0 0 0
0 0x00 0x00
data 0 0 0 0 no 0 0 0 0
0 0x00 0x00
eeprom 0 0 0 0 no 512 32 0 0
0 0x00 0x00
application 0 0 0 0 no 8192 128 0 0
0 0x00 0x00
apptable 0 0 0 0 no 2048 128 0 0
0 0x00 0x00
boot 0 0 0 0 no 2048 128 0 0
0 0x00 0x00
flash 0 0 0 0 no 10240 128 0 0
0 0x00 0x00
usersig 0 0 0 0 no 128 128 0 0
0 0x00 0x00
Programmer Type : JTAGICE3_PDI
Description : Atmel-ICE (ARM/AVR) in PDI mode
ICE hardware version: 0
ICE firmware version: 1.22 (rel. 65)
Serial number :
J418000181028102�������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������������م������������
Vtarget : 3.31 V
JTAG clock megaAVR/program: 1000 kHz
JTAG clock megaAVR/debug: 1000 kHz
JTAG clock Xmega: 1000 kHz
PDI clock Xmega : 1000 kHz
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.00s
avrdude: Device signature = 0x1e9341
avrdude: NOTE: Programmer supports page erase for Xmega devices.
Each page will be erased before programming it, but no chip erase is
performed.
To disable page erases, specify the -D option; for a chip-erase, use
the -e option.
avrdude: reading input file
"/home/mobirider/Projects/atmel-rachseeker/Debug/atmel-rachseeker.elf"
avrdude: writing flash (8836 bytes):
Writing | ################################################## | 100% 1.01s
avrdude: 8836 bytes of flash written
avrdude: verifying flash memory against
/home/mobirider/Projects/atmel-rachseeker/Debug/atmel-rachseeker.elf:
avrdude: load data flash data from input file
/home/mobirider/Projects/atmel-rachseeker/Debug/atmel-rachseeker.elf:
avrdude: input file
/home/mobirider/Projects/atmel-rachseeker/Debug/atmel-rachseeker.elf contains
8836 bytes
avrdude: reading on-chip flash data:
Reading | ################################################## | 100% 0.24s
avrdude: verifying ...
avrdude: 8836 bytes of flash verified
avrdude done. Thank you.
*********************************************************************************
**********************************TERMINAL
MODE**********************************
*********************************************************************************
$sudo avrdude -v -p x192a3u -c atmelice_pdi -t
avrdude: Version 6.1, compiled on Nov 23 2014 at 21:15:32
Copyright (c) 2000-2005 Brian Dean, http://www.bdmicro.com/
Copyright (c) 2007-2014 Joerg Wunsch
System wide configuration file is "/etc/avrdude.conf"
User configuration file is "/home/mobirider/.avrduderc"
User configuration file does not exist or is not a regular file,
skipping
Using Port : usb
Using Programmer : atmelice_pdi
avrdude: usbdev_open(): Found Atmel-ICE CMSIS-DAP, serno: J41800018102
avrdude: Found CMSIS-DAP compliant device, using EDBG protocol
AVR Part : ATxmega192A3U
Chip Erase delay : 0 us
PAGEL : P00
BS2 : P00
RESET disposition : dedicated
RETRY pulse : SCK
serial program mode : yes
parallel program mode : yes
Timeout : 0
StabDelay : 0
CmdexeDelay : 0
SyncLoops : 0
ByteDelay : 0
PollIndex : 0
PollValue : 0x00
Memory Detail :
Block Poll Page
Polled
Memory Type Mode Delay Size Indx Paged Size Size #Pages MinW
MaxW ReadBack
----------- ---- ----- ----- ---- ------ ------ ---- ------ -----
----- ---------
signature 0 0 0 0 no 3 0 0 0
0 0x00 0x00
prodsig 0 0 0 0 no 50 50 0 0
0 0x00 0x00
fuse1 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse2 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse4 0 0 0 0 no 1 0 0 0
0 0x00 0x00
fuse5 0 0 0 0 no 1 0 0 0
0 0x00 0x00
lock 0 0 0 0 no 1 0 0 0
0 0x00 0x00
data 0 0 0 0 no 0 0 0 0
0 0x00 0x00
eeprom 0 0 0 0 no 2048 32 0 0
0 0x00 0x00
application 0 0 0 0 no 196608 512 0 0
0 0x00 0x00
apptable 0 0 0 0 no 8192 512 0 0
0 0x00 0x00
boot 0 0 0 0 no 8192 512 0 0
0 0x00 0x00
flash 0 0 0 0 no 204800 512 0 0
0 0x00 0x00
usersig 0 0 0 0 no 512 512 0 0
0 0x00 0x00
fuse0 0 0 0 0 no 1 0 0 0
0 0x00 0x00
Programmer Type : JTAGICE3_PDI
Description : Atmel-ICE (ARM/AVR) in PDI mode
ICE hardware version: 0
ICE firmware version: 1.22 (rel. 65)
Serial number :
J418000181028102��������������������������������������������������������������������������������������������������������������������
Vtarget : 3.27 V
JTAG clock megaAVR/program: 1000 kHz
JTAG clock megaAVR/debug: 1000 kHz
JTAG clock Xmega: 1000 kHz
PDI clock Xmega : 1000 kHz
avrdude: AVR device initialized and ready to accept instructions
Reading | ################################################## | 100% 0.01s
avrdude: Device signature = 0x1e9744
avrdude> dump flash 0 16
>>> dump flash 0 16
0000 0c 94 79 08 0c 94 f4 28 0c 94 1e 29 0c 94 48 29 | .y. ..( ..) .H)|
avrdude> write flash 0 1 2 3 4 5
>>> write flash 0 1 2 3 4 5
avrdude (write): error writing 0x01 at 0x00000 cell=0x0c
avrdude (write): error writing 0x02 at 0x00001 cell=0x94
avrdude (write): error writing 0x03 at 0x00002 cell=0x79
avrdude (write): error writing 0x04 at 0x00003 cell=0x08
avrdude (write): error writing 0x05 at 0x00004 cell=0x0c
_______________________________________________
avrdude-dev mailing list
[email protected]
https://lists.nongnu.org/mailman/listinfo/avrdude-dev
