On Sun, 21 Nov 2021 at 23:32, Joerg Wunsch <j...@uriah.heep.sax.de> wrote:
> As David Sainty wrote: > > > It does need to know the XBee Zigbee address of the remote device on the > > mesh, which is supplied along with the serial port of the local XBee > device > > - E.g. `-P 0013a2004183dd6d@/dev/tty.usbserial-DN05LQ2S`, where > > `/dev/tty.usbserial-DN05LQ2S` is MacOS's serial port device name and > > `0013a2004183dd6d` is the ZigBee address of a remote XBee that shares a > > mesh with the XBee on that serial port. That is somewhat quirky, and > arose > > from there not being a straightforward place to store that data without > > treading on the feet of the stk500 programmer I'm essentially > overloading. > > Well, please add some kind of example and this explanation to the > documentation. I don't care much whether you add it to avrdude.1 or > doc/avrdude.texi, or to both (I'm willing to add the missing half if > you do only one of both) - but without an example, I guess nobody will > be able to figure out how to use it unless they read this example here > in the mailing list. > > Yes, I can do that, probably tomorrow.