Weird. Do you have any screenshots of the effect? I'm using FLARManager + Away3D and haven't encountered any problems at all like that. Are you generating A3D Core Prims? Or importing Collada models?
> On Jan 11, 9:38 am, Frsk <[email protected]> wrote: > Hi all > > I've started experimenting with the FlarToolkit (implemented via the > FLARManager) and Away3d. > I'm using Away3d instead of papervision because it's flash player 10 > support. > > The setup i have is working quite well, but so far I've stumbled into > a problem i can't seem to solve: > > The marker get picked up properly and the 3d model i load on the top > of it looks centered when the marker is kept in the middle of the > screen. But when i move the marker towards the edge of the screen, the > 3d model gets gradually off position > - when the marker is on the far right of the screen, the 3d model is > shifted towards the center of the screen > - when the marker is on the far left, the 3d model is still shifted > towards the center of the screen. > Basically it looks like as there was a parallax effect: the 3d object > moves less than the marker. > > I've tried fiddling around with the camera setting but without success > so far. > > Is this related to the fact that FLAR uses a papervision3d camera? > Or it depends on the settings of the camera. Actually i'm initalising > the camera using the default parameters from the flarmanager: > camera = new FLARCamera3D(FlarManagerInstance.cameraParams); > > Thanks in advance for any help.
