Hi Danny,
try this:
Numberseq numberseq;
;
ttsbegin;
numberseq = numberseq::newgetnum(smmparameters::numrefrelationaccount
());
if(numberseq)
{
print numberseq.num();
numberseq.used();
ttscommit;
}
Hth Tobias
System does not support setup 'continuous' of number sequene 'CRM_119'
Number selection is canceled.
The code is used during data import to assign values to relaccount .
In the data import definition x++ code on a field print numberseq.num
() should be input = numberseq.num()
I have been using this before without problems. So if someone could
help me out here please let me know.
Of course I could solve this by disabling the continuous flag, which
seem to work.
Regards,
Danny
Sharing the knowledge on Axapta.
Yahoo! Groups Links
------------------------ Yahoo! Groups Sponsor --------------------~-->
<font face=arial size=-1><a
href="http://us.ard.yahoo.com/SIG=12h0359u1/M=362131.6882500.7825259.1493532/D=groups/S=1705001380:TM/Y=YAHOO/EXP=1122989691/A=2889190/R=0/SIG=10r90krvo/*http://www.thebeehive.org
">Put more honey in your pocket. (money matters made easy) Welcome to the Sweet
Life - brought to you by One Economy</a>.</font>
--------------------------------------------------------------------~->
Sharing the knowledge on Axapta.
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/Axapta-Knowledge-Village/
<*> To unsubscribe from this group, send an email to:
[EMAIL PROTECTED]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
