This is getting strange each time i try to boot this thing xD
I used x50v filesystem and at first it didn't boot (note that i'm trying
to mount the 3 devices at the same time, part1, part2 and disc), i
rebooted the pda and it then booted but it happened the same as before:
the screen faded into a white screen with vertial lines, this time were
pink and after 1 or 2 minutes they're turning black, like a bar code :/
After trying to format several times my sd card i only managed to get a
white screen with some vertical lines :(
JeDi, did you do anything special?
Which filesystem did you use?
It seems that for me the only filesystem that works is the x50v one.
JeDi wrote:
On 1/5/06, Angel Sánchez Morales <[EMAIL PROTECTED]> wrote:
Yup, i tried Jedi's way, it says "there's no such device or
>> address" , well, off to work, this night perhaps i'll be fresh and
see what i'm doing wrong, thanks :)
These are the steps how I got it working:
1. fdisk /dev/hdc
2. create one partition (whole disk, linux system)
3. mke2fs /dev/hdc1
4. edit the linuxrc to mount /dev/mmc/blk0/part1 in stead of /dev/mmc/blk0/disk
5. Watch OPIE boot :-)
Maybe your SD card isn't supported? I use a 256MB card from SanDisk.
I've heard some stories about some brands of SD cards not being
supported.
Good luck!
Greetz,
JeDi
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
