I got mine x50v running after upgrade to A05 from A01
A01 will not work
current info:
Model : Dell Axim X50v
CPU : Intel® PXA270 624 MHz Stepping
RAM Size : 64 MB
ROM Size : 128 MB
ROM Version: A05 (07270500)
OS Version : 4.21.1088 (Build 14260) - WM2003 SE
Nick Jaksic wrote:
i made it no worries on battery
Nick Jaksic wrote:
so here is my panic. my battery is running out but I already started
the upgrade process. can I plug power to axim while updating. i am
afraid to brick it.
insanelysick wrote:
your only going from windows mobile 2003 se A01 to wm2003se A05 right?
if so you only need the K filesn there for the rom.
( the B files are for the bootloader youd only need that if you were
goin from wm2003se to wm5)
glad to help man!
Nick Jaksic wrote:
that worked. u d man.
whick one i need to choose B or K ?
insanelysick wrote:
i had that for a while. it is a bit tricky to get right. you got
to hold power and wifi then push reset for a second or two then
let reset go and continue to hold power and wifi then it should go
blank then boot loader will pop up.i just did it a minute a go to
double check for you.so it works fine for me.
it did take me a few tries to get right tho.
Nick Jaksic wrote:
after pressing the wireless+power+reset all at once i get
prompted to clear data or cancel which takes me back to wm2003
screen calibration
what am i doing wrong?
insanelysick wrote:
heres the link to where u can get the files
http://www.rapidsharing.com/b75c6f6082ba72bea5a37ad85f5b3703
and heres a link to the thread
http://www.aximsite.com/boards/showthread.php?t=112012
insanelysick wrote:
if you look on aximsite theres a thread there where can get
the img and crc files,just pop thm in the root of ur sd card
and then press ;
wifi + power + reset which starts the bootloader and u can
upgrade like that,.
hope that helps
Nick Jaksic wrote:
is there anyone that got x50v w/ A01 and sd fat32 image running?
my issue is that I don't have a way to upgrade to A05. my pda
has no cables
insanelysick wrote:
is there anyway to re calibrate the screen?when i first tryed
it, it
let me calibrate the screen first.but now when reload it,
that doesnt
appear.
thanks for all the great work so far guys. its amazing to see
it all
start to come togeather!
Michael Cutler wrote: i
My only suggestion would be to try ROM Version A05, I am
running:
Model : Dell Axim X50v
CPU : Intel® PXA270 624 MHz Stepping
RAM Size : 64 MB
ROM Size : 128 MB
ROM Version: A05 (07270500)
OS Version : 4.21.1088 (Build 14260) - WM2003 SE
And it all works fine!
Michael
Quoting Nick Jaksic <[EMAIL PROTECTED]>:
is there any how to for sd fat32 scenario?
i formated my 1GB sd card to fat32
i copied initrd, zImage, default.txt, haret_uart.exe &
x50v-rootfs.img to the root of sd card
i enabled mirror mode
opened haret_uart.exe clicked on run
result is that pda just freezes
I have x50v w/ wm2003 se, A1 sd 1GB
any suggestions please help, :'(
high bass wrote: I am having some problems. Opie does not boot
because my SD card will not mount (512MB SD Kingston card) i
formatted the card in windows nothing... then i tried using
Pocket
Mechanic to format Fat32 and still will not mount i have
tried moving
the Haret and Zimage Inrtid and default.txt around but
leaving the
img file in the root of the SD card and still nothing. I
have the ao5
hardware revision with the ao5 Eng ROM i have tried
multiple times
with the same and different variables hard resetting
etc.... Could
anyone offer any suggestions or does anyone here have a
similar setup
ROM wise and Kingston card?
THANKS IN ADVANCE
--
_______________________________________________
Aximx50-port mailing list
[email protected]
https://www.handhelds.org/mailman/listinfo/aximx50-port
