To stop the flickering, grab this file: http://axim.openfbo.com/pxaregs-axim
Put it in /bin on your axim filesystem. Then run: pxaregs-axim LCCR3_PCD 2 That sets the Pixel Clock divisor on the LCCR3 register. This can be put into a kernel header file to initialize the LCCR3 register for the axim PDAs. Unfortunately, using the pxaregs-axim command, if the display goes to sleep it will flicker again when it comes back. Not sure if fixing this in the kernel will make it permanent... Matt On 3/20/07, Bjørn Nøstvold <[EMAIL PROTECTED]> wrote:
Boots fine on my axim x50v, screen flickers a lot as previously mentioned, touchscreen calibration is a bit off, and not responding very well as I sometime have to tap the screen many times for it to respond press a button or drag something. Sleeping doesn't work, but adjusting brightness works. I would definitely move to linux if above issues were fixed and wifi and bluetooth worked. Being able to boot directly to linux would also be very cool. But sound isn't a big priority for me really. I'm trying to learn coding, but I can only be called a n00b at best. Maybe I can start contributing in a year or so :P Anyway, I really appreciate the work you guys have done. This is totally awesome. Bjorn On 3/20/07, nick jaksic <[EMAIL PROTECTED]> wrote: > Patrick Steiner wrote: > > On Monday, 19. March 2007 22:06:08 Andreas Bierfert wrote: > > > >> On Mon, 19 Mar 2007 20:15:13 +0100 > >> > >> Patrick Steiner < [EMAIL PROTECTED]> wrote: > >> > >>> hi, > >>> > >>> i took some time but now i have uploaded 2 new images onto my webspace. > >>> the aximx50 one is for the non vga devices. but read the README > >>> (http://law.hostsen.net/oe/axim/README) and you know more ;-) > >>> > >>> here are the images: > >>> > >>> aximx50: > >>> http://law.hostsen.net/oe/axim/aximx50/ > >>> > >>> aximx50v: > >>> http://law.hostsen.net/oe/axim/aximx50v/ > >>> > >>> the aximx50 image is untested because i don't have such a device. > >>> > >>> so please report me if this one works. > >>> > >> First of all thanks for taking the time to make and upload these... My axim > >> now boots in a much more readable resolution (tough some parts to the right > >> are still missing). The touchscreen does not work right as reported by > >> other people but it still is something :) Now I just need to find out how I > >> can help improve on these things :) > >> > > ok i ´ll check if i can find out why the touchscreen doesnt work, perhaps the > > freq. could you launch ts_test via ssh so you can test the touchscreen. > > > > if you are familiar with kernel development it would be nice if you could work > > on wifi bluetooth or sound... > > > > regards. > > patrick > > > > i have x51v > ROX Version 12 > US > sd card 512 > > i tested the latest port posted @ > http://law.hostsen.net/oe/axim/aximx50v/ by Patrick > BOOT -- works to GUI auto login (50% success 1 out of 2 tries) > Calibrate Touchscreen next step > Touchscreen is ~95% accurate, much better than ever before. > ts_test works > bit of a flickering on VGA screen. Feels like refresh rate. > Re-Dock Axim enables ssh login works > http://www.handhelds.org/moin/moin.cgi/x50vHowTo > NO WiFi YET OR BlueTooth > > this is all FYI > > thank you ALL, > > nick > > > > >> Thanks > >> > >> Andreas > >> > > > > > > > > > > -- > _______________________________________________ > Aximx50-port mailing list > [email protected] > https://www.handhelds.org/mailman/listinfo/aximx50-port > -- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
-- _______________________________________________ Aximx50-port mailing list [email protected] https://www.handhelds.org/mailman/listinfo/aximx50-port
