I got Xerces 2.2.0 from
http://archive.apache.org/dist/xml/xerces-c/Xerces-C_2_2_0/
It works for me. Did you get yours from the same location.
Thanks,
Samisa...
Kon Kam King, France wrote:
Hi Fred,
I have tested with MSVC 6 without any change. Also on another issue,
Samisa Abeysinghe mentioned I needed to rebuild axis-c to use
Xerces-c_2.6.
Do you have a xerces_2_2_0.dll on your box I could just do a test with?
I have tried posting for help on the xerces-c mailing list, but am not
sure it got through. So far I have not received any reply. There is a
mil saying that distributions in the archive site (from 2.6 backwards)
for the hp platform is corrupt.
Regards,
France
------------------------------------------------------------------------
*From:* Fred Preston [mailto:[EMAIL PROTECTED]
*Sent:* Tuesday, September 13, 2005 11:15 AM
*To:* Apache AXIS C User List
*Subject:* RE: Trying to run simple Calculator sample client program
Hi Kon Kam King,
Chinthana C. Dinapala's note yesterday "RE: Most of the test are
failing", says that he as tested with xerces-c2_6 as well as
xerces-c2_2_0 ("I have tested and its working fine for us. Both with
xerces-c2_2_0 and xerces-c2_6 it’s working fine."). If you cannot
successfully download 2_2_0 it would be worth trying to use 2_6. I
also note that you are building using MSVC 7. All of our builds are
currently built using MSVC 6 and there are some problems that we are
uncovering/investigating between mixing 6 and 7. Some produce compiler
warnings (as you have discovered) and other areas produce errors. For
the moment, ignore the warnings as it seems to be resolving them
correctly. The AxisClient_D.dll is the debug version of the
AxisClient.dll (this is also true of transport and channel dlls).
Check the link options in your application build to make sure that you
have specified AxisClient.lib rather than AxisClient_D.lib. If you
have specified '_D', it will look for AxisClient_D.dll.
Regards,
Fred Preston.
*"Kon Kam King, France" <[EMAIL PROTECTED]>*
09/12/2005 12:08 PM
Please respond to "Apache AXIS C User List"
To: "Apache AXIS C User List" <[email protected]>
cc:
Subject: RE: Trying to run simple Calculator sample client program
Hi,
Thanks for your help.
I downloaded again with your link. But I still have a problem with
Winzip complaining it cannot open the file it’s an invalid archive.
I also have a bubble when I point to the file saying bad zip file or
it may be part of a spanned zip file.
I am looking at my build under Microsoft Visual C++.
I see the following warnings (C4251) at compile. Can they be source of
errors at run time?
: Calculator.cpp
c:\axis-c-1.5\axis-c-1-5-win32\include\axis\client\Call.hpp(484) :
warning C4251: 'axiscpp::Call::m_strProxyHost' : class
'std::basic_string<_Elem,_Traits,_Ax>' needs to have dll-interface to
be used by clients of class 'axiscpp::Call' with [ _Elem=char,
_Traits=std::char_traits, _Ax=std::allocator ]
c:\axis-c-1.5\axis-c-1-5-win32\include\axis\client\Stub.hpp(698) :
warning C4251: 'axiscpp::Stub::m_viCurrentSOAPHeaderBlock' : class
'std::vector<_Ty>::iterator' needs to have dll-interface to be used by
clients of class 'axiscpp::Stub' with [ _Ty=axiscpp::IHeaderBlock * ]
c:\Program Files\Microsoft Visual Studio .NET
2003\Vc7\include\vector(200) : see declaration of
'std::vector<_Ty>::iterator' with [ _Ty=axiscpp::IHeaderBlock * ]
c:\axis-c-1.5\axis-c-1-5-win32\include\axis\client\Stub.hpp(713) :
warning C4251: 'axiscpp::Stub::m_viCurrentSOAPMethodAttribute' : class
'std::vector<_Ty>::iterator' needs to have dll-interface to be used by
clients of class 'axiscpp::Stub' with [ _Ty=axiscpp::IAttribute * ]
c:\Program Files\Microsoft Visual Studio .NET
2003\Vc7\include\vector(200) : see declaration of
'std::vector<_Ty>::iterator' with [ _Ty=axiscpp::IAttribute * ]
c:\axis-c-1.5\axis-c-1-5-win32\include\axis\AxisException.hpp(176) :
warning C4275: non dll-interface class 'exception' used as base for
dll-interface class 'axiscpp::AxisException' c:\Program
Files\Microsoft Visual Studio .NET 2003\Vc7\include\exception(39) :
see declaration of 'exception'
Also on one link it seemed looks for Axis_Client_D;dll, which I don’t
find in the extract/bin.
Can these be causing the error?
Thanks,
France
------------------------------------------------------------------------
*From:* Fred Preston [mailto:[EMAIL PROTECTED] *
Sent:* Monday, September 12, 2005 12:35 PM*
To:* Apache AXIS C User List*
Subject:* RE: Trying to run simple Calculator sample client program
Hi Kon Kam King,
I have just downloaded xerces_2_2_0 from
http://archive.apache.org/dist/xml/xerces-c/Xerces-C_2_2_0/
(incidentally, http://archive.apache.org/dist/xml/xerces-c/ contains
all of the builds from the original 1_0_0 !).
Regards,
Fred Preston.
*"Kon Kam King, France" <[EMAIL PROTECTED]>*
09/09/2005 04:42 PM
Please respond to "Apache AXIS C User List"
To: "Apache AXIS C User List" <[email protected]>
cc:
Subject: RE: Trying to run simple Calculator sample client program
Fred,
Thanks for your answer.
I am having trouble opening the xerces-c_2_2_0 from the archive site.
Could you please send me a copy of xerces-c_2_2_0.dll
Thanks,
France
------------------------------------------------------------------------
*
From:* Fred Preston [mailto:[EMAIL PROTECTED] *
Sent:* Friday, September 09, 2005 3:14 PM*
To:* Apache AXIS C User List*
Subject:* RE: Trying to run simple Calculator sample client program
Hi Kon Kam King,
All of the DLLs (LIBs for Linux & AIX) must be on the path. Don't
forget that XERCES also needs to be on the path as does OpenSSL (if
you are using SSL). Reference to the 'parser library' means that it
can't find xerces. Be sure that you have the correct version of xerces
and it is on the PATH environment variable (all this information
should either be in the documentation or web site (i.e for xerces, I
use xerces-c_2_2_0.dll).
Regards,
Fred Preston.
*"Kon Kam King, France" <[EMAIL PROTECTED]>*
09/09/2005 10:49
Please respond to "Apache AXIS C User List"
To: "Apache AXIS C User List" <[email protected]>
cc:
Subject: RE: Trying to run simple Calculator sample client program
When I run outside of debugger, I get the error: DLOPEN failed in
loading parser library.
The procedure being executed is :
Calculator::Calculator(const char* pchEndpointUri, AXIS_PROTOCOL_TYPE
eProtocol)
:Stub(pchEndpointUri, eProtocol)
{
}
Is the parser Xerces lib missing or in error? How do I check that?
Can somebody help?
Thanks
-----Original Message-----
From: Kon Kam King, France
Sent: Monday, September 05, 2005 4:15 PM
To: 'Apache AXIS C User List'
Subject: Trying to run simple Calculator sample client program
I have built the Calculator sample with Vc++ with Axis-C 1.5.
I run the client under the debugger, and I get the following
At execution of line 79 Calculator ws (endpoint):
'Calculator_D.exe': Loaded
'C:\axis-c-1.5\axis-c-1-5-win32\bin\Calculator_D.exe', Symbols loaded.
'Calculator_D.exe': Loaded 'C:\WINDOWS\system32\ntdll.dll', No symbols
loaded.
'Calculator_D.exe': Loaded 'C:\WINDOWS\system32\kernel32.dll', No
symbols loaded.
'Calculator_D.exe': Loaded
'C:\axis-c-1.5\axis-c-1-5-win32\bin\AxisClient.dll', No symbols loaded.
'Calculator_D.exe': Loaded 'C:\WINDOWS\system32\msvcp60.dll', No symbols
loaded.
'Calculator_D.exe': Loaded 'C:\WINDOWS\system32\msvcrt.dll', No symbols
loaded.
HEAP[Calculator_D.exe]: Invalid Address specified to RtlFreeHeap(
00310000, 10080F0C )
Unhandled exception at 0x7c822583 in Calculator_D.exe: User breakpoint.
First-chance exception at 0x77e55dea in Calculator_D.exe: Microsoft C++
exception: axiscpp::AxisEngineException @ 0x0012f8b4.
First-chance exception at 0x77e55dea in Calculator_D.exe: Microsoft C++
exception: [rethrow] @ 0x00000000.
The program '[5144] Calculator_D.exe: Native' has exited with code 0
(0x0).
What's wrong or missing?
Thanks,
France
