Hi, thank you for the answer first!!
I think you use Axis2, but i work the calculator example with axis1.6 c++,
see:
http://ws.apache.org/axis/cpp/clientuser-guide.html
(i hope its a forum not only for axis2 user..! )
I think the example is a little bit different...
The generation of the Stub-Code with the wsdl is successfull, but i cant
compile. There is the
"undefined reference to calculator::calculator() " error i describe first.
is there anybody uses axis1.x too, who can help me?
Although thank you very much Ravi K. ;-)!!!
Ravi Krishnaswamy wrote:
>
> I don't know if we're talking about the same sample (under
> samples/server/Calculator):
>
> I had to make changes in both the client and server implementations of
> the Calculator sample.
> I develop in win32.
>
> Here are the main changes I made:
>
> For the Client:
> - I recreated the stubs from wsdl2c using the wsdl in
> samples/server/Calculator.wsdl
> - I reimplemented the 'test_calculator.c' file to set the parameters on
> the request object based on the
> Actual names of the parameters in the wsdl (they were out of sync):
>
>
> stub = axis2_stub_create_Calculator(env, client_home, endpoint_uri);
>
> /* create the struct */
> add_req = adb_add_create(env);
> adb_add_set_param_1(add_req, env, val1); <==
> adb_add_set_param_2(add_req, env, val2); <==
>
>
> /* invoke the web service method */
> add_res = axis2_stub_op_Calculator_add(stub, env, add_req);
>
> if (!add_res)
> {
> printf("Error: response NULL\n");
> return -1;
> }
>
> /* return the output params using databinding */
> ret_val = adb_addResponse_get_result(add_res, env);
>
> printf("finally: add (%d %d ) = %d\n", val1, val2, ret_val);
>
> return 0
>
> - I added the build target axis2_client_calculator into the makefile in
> build\win32\makefile (just use another client example)
>
>
>
>
>
> For the Server, I found the code was out of sync as well from the wsdl.
> The following are the main changes I made:
> - Code diff is below. Essentially 2 changes, -
> 1. the object model in calc.c was deeper than the wsdl indicated, so I
> eliminated
> Several of the lines to match the actual SOAP object:
> 2. the response object was different from what was expected based on the
> wsdl and the client code.
>
>
> *** calc.c Tue Aug 05 16:31:14 2008
> --- calc.c.bak Thu Jul 10 17:54:18 2008
> ***************
> *** 34,54 ****
> axis2_char_t *param2_str = NULL;
> long int param2 = 0;
>
> if (!node)
> {
> AXIS2_ERROR_SET(env->error,
> AXIS2_ERROR_SVC_SKEL_INPUT_OM_NODE_NULL,
> AXIS2_FAILURE);
> printf("Calculator client request ERROR: input parameter
> NULL\n");
> return NULL;
> }
> ! param1_node = axiom_node_get_first_child(node, env);
> if (!param1_node)
> {
> AXIS2_ERROR_SET(env->error,
>
> AXIS2_ERROR_SVC_SKEL_INVALID_XML_FORMAT_IN_REQUEST,
> AXIS2_FAILURE);
> printf("Calculator service ERROR: invalid XML in request\n");
> return NULL;
> }
> param1_text_node = axiom_node_get_first_child(param1_node, env);
> if (!param1_text_node)
> --- 34,73 ----
> axis2_char_t *param2_str = NULL;
> long int param2 = 0;
>
> if (!node)
> {
> AXIS2_ERROR_SET(env->error,
> AXIS2_ERROR_SVC_SKEL_INPUT_OM_NODE_NULL,
> AXIS2_FAILURE);
> printf("Calculator client request ERROR: input parameter
> NULL\n");
> return NULL;
> }
> ! complex_node = axiom_node_get_first_child(node, env);
> ! if (!complex_node)
> ! {
> ! AXIS2_ERROR_SET(env->error,
> !
> AXIS2_ERROR_SVC_SKEL_INVALID_XML_FORMAT_IN_REQUEST,
> ! AXIS2_FAILURE);
> ! printf("Calculator service ERROR: invalid XML in request\n");
> ! return NULL;
> ! }
> ! seq_node = axiom_node_get_first_child(complex_node, env);
> ! if (!seq_node)
> ! {
> ! AXIS2_ERROR_SET(env->error,
> !
> AXIS2_ERROR_SVC_SKEL_INVALID_XML_FORMAT_IN_REQUEST,
> ! AXIS2_FAILURE);
> ! printf("Calculator service ERROR: invalid XML in request\n");
> ! return NULL;
> ! }
> !
> ! param1_node = axiom_node_get_first_child(seq_node, env);
> if (!param1_node)
> {
> AXIS2_ERROR_SET(env->error,
>
> AXIS2_ERROR_SVC_SKEL_INVALID_XML_FORMAT_IN_REQUEST,
> AXIS2_FAILURE);
> printf("Calculator service ERROR: invalid XML in request\n");
> return NULL;
> }
> param1_text_node = axiom_node_get_first_child(param1_node, env);
> if (!param1_text_node)
> ***************
> *** 113,146 ****
> return NULL;
> }
>
> if (param1_str && param2_str)
> {
> long int result = 0;
> axis2_char_t result_str[255];
>
> axiom_element_t *ele1 = NULL;
> axiom_node_t *node1 = NULL,
> ! *node2 = NULL, *node3 = NULL;
> axiom_namespace_t *ns1 = NULL;
> axiom_text_t *text1 = NULL;
>
> param1 = strtol(param1_str, NULL, 10);
> param2 = strtol(param2_str, NULL, 10);
> result = param1 + param2;
> sprintf(result_str, "%ld", result);
>
> ns1 = axiom_namespace_create(env,
> !
> "http://ws.apache.org/axis2/services/Calculator/types";, "ns1");
> ! ele1 = axiom_element_create(env, NULL, "addResponse", ns1,
> &node1);
> ! ele1 = axiom_element_create(env, node1, "result", NULL, &node2);
> ! text1 = axiom_text_create(env, node2, result_str, &node3);
>
> return node1;
> }
>
> AXIS2_ERROR_SET(env->error,
>
> AXIS2_ERROR_SVC_SKEL_INVALID_OPERATION_PARAMETERS_IN_SOAP_REQUEST,
> AXIS2_FAILURE);
> printf("Calculator service ERROR: invalid parameters\n");
> return NULL;
> }
> --- 132,164 ----
> return NULL;
> }
>
> if (param1_str && param2_str)
> {
> long int result = 0;
> axis2_char_t result_str[255];
>
> axiom_element_t *ele1 = NULL;
> axiom_node_t *node1 = NULL,
> ! *node2 = NULL;
> axiom_namespace_t *ns1 = NULL;
> axiom_text_t *text1 = NULL;
>
> param1 = strtol(param1_str, NULL, 10);
> param2 = strtol(param2_str, NULL, 10);
> result = param1 + param2;
> sprintf(result_str, "%ld", result);
>
> ns1 = axiom_namespace_create(env,
> ! "http://axis2/test/namespace1";,
> "ns1");
> ! ele1 = axiom_element_create(env, NULL, "result", ns1, &node1);
> ! text1 = axiom_text_create(env, node1, result_str, &node2);
>
> return node1;
> }
>
> AXIS2_ERROR_SET(env->error,
>
> AXIS2_ERROR_SVC_SKEL_INVALID_OPERATION_PARAMETERS_IN_SOAP_REQUEST,
> AXIS2_FAILURE);
> printf("Calculator service ERROR: invalid parameters\n");
> return NULL;
> }
>
>
>
>
>
> With that I got this sample to work.
>
> I don't know if there's a newer version of the Sample - but that's what I
> had to do.
>
>
> Ravi
>
>
>
>
>
>
>
>
> -----Original Message-----
> From: Martina08 [mailto:[EMAIL PROTECTED]
> Sent: Friday, August 15, 2008 6:50 AM
> To: [email protected]
> Subject: Axis c++ calculator compiling error, Admin Client
>
>
> Hi all,
> i have some problems with the Axis c++ calculator-example. I build my
> Client
> with
> g++ c.cpp -I$AXISCPP_HOME/include -I$AXISCPP_HOME/lib -ldl
> -laxiscpp_client
> -o calculator and
> i get the error: "cannot find laxiscpp_client". I search in the mailing
> list
> for this problem and change my command to:
> g++ c.cpp -I$AXISCPP_HOME/include -I$AXISCPP_HOME/lib -ldl
> -L<PathToTheLibrary>laxis_client.so -o calculator
> Now i think it finds the library but i get the error "undefined reference
> to
> 'Calculator::Calculator()' "
> I have search in the mailing list but all tipps don´t solve this problem.
> I use Open Suse 10.3,compiler version 4.2.1 and try it with KDE/KDevelop
> too, but it produces the same error.
> I think i have set the LD_LIBRARY_PATH correctly. Maybe there is a
> conflict
> with 32 and 64 bit processor.
> Can anybody help me please?
> After i can´t solve this problem i go on with the server guide. I run the
> simle Axis Server with:
> ./simple_axis_server 8080 and then deploy the service with:
> java org.apache.axis.client.AdminClient
> -Lhttp://localhost:8080/axis/Services/AdminService deploy.wsdd
> I get the message: "Porcessing file deploy.wsdd"
> Was the deploying successful or not?
> By checking the deploying configuration in the user server guide:Open a
> browser and enter the link http://localhost/axis
> I can´t open the link. Why it doesn´t work??
> I hope there is somebody who can help me in some questions...
> --
> View this message in context:
> http://www.nabble.com/Axis-c%2B%2B-calculator-compiling-error%2C-Admin-Client-tp18998976p18998976.html
> Sent from the Axis - C++ - User mailing list archive at Nabble.com.
>
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
>
--
View this message in context:
http://www.nabble.com/Axis-c%2B%2B-calculator-compiling-error%2C-Admin-Client-tp18998976p19010169.html
Sent from the Axis - C++ - User mailing list archive at Nabble.com.
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
