Hi Amila, Could you please reply to my question . As this is high priority task and iam unable to get any clue from google also.
Thanks, Swapna Soni. soni swapna wrote: > > Hi Amila, > > Thanks for your reply. We are placing module phase in the same order as u > said. Below is the code of our axis2.xml file. > > <!-- > ~ Licensed to the Apache Software Foundation (ASF) under one > ~ or more contributor license agreements. See the NOTICE file > ~ distributed with this work for additional information > ~ regarding copyright ownership. The ASF licenses this file > ~ to you under the Apache License, Version 2.0 (the > ~ "License"); you may not use this file except in compliance > ~ with the License. You may obtain a copy of the License at > ~ > ~ http://www.apache.org/licenses/LICENSE-2.0 > ~ > ~ Unless required by applicable law or agreed to in writing, > ~ software distributed under the License is distributed on an > ~ "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY > ~ KIND, either express or implied. See the License for the > ~ specific language governing permissions and limitations > ~ under the License. > --> > > <axisconfig name="AxisJava2.0"> > <!-- ================================================= --> > <!-- Parameters --> > <!-- ================================================= --> > <parameter name="hotdeployment">true</parameter> > <parameter name="hotupdate">false</parameter> > <parameter name="enableMTOM">false</parameter> > <parameter name="enableSwA">false</parameter> > > <!-- Including ASF-RM related parameter - yash --> > <parameter name="ASFRMStorageManager" > locked="false">inmemory</parameter> > > <!--Uncomment if you want to enable file caching for attachments --> > <!--parameter name="cacheAttachments">true</parameter> > <parameter name="attachmentDIR"></parameter> > <parameter name="sizeThreshold">4000</parameter--> > > <!--Uncomment if you want to plugin your own attachments lifecycle > implementation --> > <!--<attachmentsLifecycleManager > class="org.apache.axiom.attachments.lifecycle.impl.LifecycleManagerImpl"/>--> > > > <!--Uncomment if you want to enable the reduction of the in-memory > cache of WSDL definitions --> > <!--In some server environments, the available memory heap is limited > and can fill up under load --> > <!--Since in-memory copies of WSDL definitions can be large, some > steps can be taken--> > <!--to reduce the memory needed for the cached WSDL definitions. --> > <!--parameter name="reduceWSDLMemoryCache">true</parameter--> > > <!--This will give out the timout of the configuration contexts, in > milliseconds--> > <parameter name="ConfigContextTimeoutInterval">30000</parameter> > > <!--During a fault, stack trace can be sent with the fault message. > The following flag will control --> > <!--that behavior.--> > <parameter name="sendStacktraceDetailsWithFaults">false</parameter> > > <!--If there aren't any information available to find out the fault > reason, we set the message of the exception--> > <!--as the faultreason/Reason. But when a fault is thrown from a > service or some where, it will be --> > <!--wrapped by different levels. Due to this the initial exception > message can be lost. If this flag--> > <!--is set, then Axis2 tries to get the first exception and set its > message as the faultreason/Reason.--> > <parameter name="DrillDownToRootCauseForFaultReason">false</parameter> > > <parameter name="userName">admin</parameter> > <parameter name="password">axis2</parameter> > > <!--To override repository/services you need to uncomment following > parameter and value SHOULD be absolute file path.--> > <!--ServicesDirectory only works on the following cases--> > <!---File based configurator and in that case the value should be a > file URL (http:// not allowed)--> > <!---When creating URL Based configurator with URL file:// --> > <!--- War based configurator with expanded case , --> > > <!--All the other scenarios it will be ignored.--> > <!--<parameter name="ServicesDirectory">service</parameter>--> > <!--To override repository/modules you need to uncomment following > parameter and value SHOULD be absolute file path--> > <!--<parameter name="ModulesDirectory">modules</parameter>--> > > > > <!--Following params will set the proper context paths for > invocations. All the endpoints will have a commons context--> > <!--root which can configured using the following contextRoot > parameter--> > <!--<parameter name="contextRoot">axis2</parameter>--> > > <!--Our HTTP endpoints can handle both REST and SOAP. Following > parameters can be used to distinguiush those endpoints--> > <!--In case of a servlet, if you change this you have to manually > change the settings of your servlet container to map this --> > <!--context path to proper Axis2 servlets--> > <!--<parameter name="servicePath">services</parameter>--> > <!--<parameter name="restPath">rest</parameter>--> > > <!-- Following parameter will completely disable REST handling in > Axis2--> > <parameter name="disableREST" locked="false">false</parameter> > > <!-- Following parameter will suppress generation of SOAP 1.2 bindings > in auto-generated WSDL files --> > <parameter name="disableSOAP12" locked="true">false</parameter> > > <!--POJO deployer , this will alow users to drop .class file and make > that into a service--> > <deployer extension=".class" directory="pojo" > class="org.apache.axis2.deployment.POJODeployer"/> > <deployer extension=".jar" directory="servicejars" > class="org.apache.axis2.jaxws.framework.JAXWSDeployer"/> > > <!--<deployer extension=".jsa" directory="rmiservices" > class="org.apache.axis2.rmi.deploy.RMIServiceDeployer"/>--> > > > <!-- Following parameter will set the host name for the epr--> > <!--<parameter name="hostname" locked="true">myhost.com</parameter>--> > > <!-- If you have a front end host which exposes this webservice using > a different public URL --> > <!-- use this parameter to override autodetected url --> > <!--<parameter > name="httpFrontendHostUrl">https://someotherhost/context</parameter>--> > > > <!-- The way of adding listener to the system--> > <!-- <listener class="org.apache.axis2.ObserverIMPL">--> > <!-- <parameter > name="RSS_URL">http://127.0.0.1/rss</parameter>--> > <!-- </listener>--> > > <threadContextMigrators> > <threadContextMigrator listId="JAXWS-ThreadContextMigrator-List" > class="org.apache.axis2.jaxws.addressing.migrator.EndpointContextMapMigrator"/> > </threadContextMigrators> > > <!-- ================================================= --> > <!-- Message Receivers --> > <!-- ================================================= --> > <!--This is the deafult MessageReceiver for the system , if you want > to have MessageReceivers for --> > <!--all the other MEP implement it and add the correct entry to here , > so that you can refer from--> > <!--any operation --> > <!--Note : You can ovrride this for a particular service by adding the > same element with your requirement--> > <messageReceivers> > <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"; > > class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> > <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"; > > class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> > <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"; > > class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> > <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"; > > class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> > </messageReceivers> > > <!-- ================================================= --> > <!-- Message Formatter --> > <!-- ================================================= --> > <!--Following content type to message formatter mapping can be used to > implement support for different message --> > <!--format serialization in Axis2. These message formats are expected > to be resolved based on the content type. --> > <messageFormatters> > <messageFormatter contentType="application/x-www-form-urlencoded" > > class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/> > <messageFormatter contentType="multipart/form-data" > > class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/> > <messageFormatter contentType="application/xml" > > class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/> > <messageFormatter contentType="text/xml" > > class="org.apache.axis2.transport.http.SOAPMessageFormatter"/> > <messageFormatter contentType="application/soap+xml" > > class="org.apache.axis2.transport.http.SOAPMessageFormatter"/> > </messageFormatters> > > <!-- ================================================= --> > <!-- Message Builders --> > <!-- ================================================= --> > <!--Following content type to builder mapping can be used to implement > support for different message --> > <!--formats in Axis2. These message formats are expected to be > resolved based on the content type. --> > <messageBuilders> > <messageBuilder contentType="application/xml" > > class="org.apache.axis2.builder.ApplicationXMLBuilder"/> > <messageBuilder contentType="application/xml" > > class="org.apache.axis2.builder.ApplicationXMLBuilder"/> > <messageBuilder contentType="application/x-www-form-urlencoded" > > class="org.apache.axis2.builder.XFormURLEncodedBuilder"/> > <messageBuilder contentType="multipart/form-data" > > class="org.apache.axis2.builder.MultipartFormDataBuilder"/> > </messageBuilders> > > <!-- ================================================= --> > <!-- Transport Ins --> > <!-- ================================================= --> > <transportReceiver name="http" > > class="org.apache.axis2.transport.http.SimpleHTTPServer"> > <parameter name="port">8090</parameter> > <!-- Here is the complete list of supported parameters (see > example settings further below): > port: the port to listen on (default 6060) > hostname: if non-null, url prefix used in reply-to endpoint > references (default null) > originServer: value of http Server header in outgoing > messages (default > "Simple-Server/1.1") > requestTimeout: value in millis of time that requests can > wait for data (default 20000) > requestTcpNoDelay: true to maximize performance and minimize > latency (default true) > false to minimize bandwidth consumption by > combining segments > requestCoreThreadPoolSize: number of threads available for > request processing (unless queue fills up) (default 25) > requestMaxThreadPoolSize: number of threads available for > request processing if queue fills up (default 150) > note that default queue never fills > up: see HttpFactory > threadKeepAliveTime: time to keep threads in excess of core > size alive while inactive (default 180) > note that no such threads can exist with > default unbounded request queue > threadKeepAliveTimeUnit: TimeUnit of value in > threadKeepAliveTime (default SECONDS) (default SECONDS) > --> > <!-- <parameter > name="hostname">http://www.myApp.com/ws</parameter> --> > <!-- <parameter name="originServer">My-Server/1.1</parameter> > > --> > <!-- <parameter name="requestTimeout">10000</parameter> > > --> > <!-- <parameter name="requestTcpNoDelay">false</parameter> > > --> > <!-- <parameter name="requestCoreThreadPoolSize">50</parameter> > > --> > <!-- <parameter name="requestMaxThreadPoolSize">100</parameter> > > --> > <!-- <parameter name="threadKeepAliveTime">240000</parameter> > > --> > <!-- <parameter > name="threadKeepAliveTimeUnit">MILLISECONDS</parameter> --> > </transportReceiver> > > <!--Uncomment this and configure as appropriate for JMS transport > support, after setting up your JMS environment (e.g. ActiveMQ) > <transportReceiver name="jms" > class="org.apache.axis2.transport.jms.JMSListener"> > <parameter name="myTopicConnectionFactory"> > <parameter > name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> > <parameter > name="java.naming.provider.url">tcp://localhost:61616</parameter> > <parameter > name="transport.jms.ConnectionFactoryJNDIName">TopicConnectionFactory</parameter> > </parameter> > > <parameter name="myQueueConnectionFactory"> > <parameter > name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> > <parameter > name="java.naming.provider.url">tcp://localhost:61616</parameter> > <parameter > name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter> > </parameter> > > <parameter name="default"> > <parameter > name="java.naming.factory.initial">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> > <parameter > name="java.naming.provider.url">tcp://localhost:61616</parameter> > <parameter > name="transport.jms.ConnectionFactoryJNDIName">QueueConnectionFactory</parameter> > </parameter> > </transportReceiver>--> > > <!-- ================================================= --> > <!-- Non-blocking http/s Transport Listener --> > > <!-- the non blocking http transport based on HttpCore + NIO > extensions > <transportReceiver name="http" > class="org.apache.axis2.transport.nhttp.HttpCoreNIOListener"> > <parameter name="port" locked="false">9000</parameter> > <parameter name="non-blocking" locked="false">true</parameter> > </transportReceiver>--> > > <!-- the non blocking https transport based on HttpCore + SSL-NIO > extensions > <transportReceiver name="https" > class="org.apache.axis2.transport.nhttp.HttpCoreNIOSSLListener"> > <parameter name="port" locked="false">9002</parameter> > <parameter name="non-blocking" locked="false">true</parameter> > <parameter name="keystore" locked="false"> > <KeyStore> > <Location>identity.jks</Location> > <Type>JKS</Type> > <Password>password</Password> > <KeyPassword>password</KeyPassword> > </KeyStore> > </parameter> > <parameter name="truststore" locked="false"> > <TrustStore> > <Location>trust.jks</Location> > <Type>JKS</Type> > <Password>password</Password> > </TrustStore> > </parameter>--> > <!--<parameter name="SSLVerifyClient">require</parameter> > supports optional|require or defaults to none --> > <!--</transportReceiver>--> > > <!-- ================================================= --> > <!-- Mail Transport Listener --> > <!-- This is a sample configuration. It assumes a mail server running > in localhost. > Listener pops messages that comes to the email address > r...@localhost. Users > password is red. Listener connect to the server every 3000 > milliseconds. > Parameters with "transport." prefix is Axis2 specific. Others are > all from Java Mail API. > http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html > --> > <!-- ================================================= --> > <!--<transportReceiver name="mailto" > class="org.apache.axis2.transport.mail.SimpleMailListener"> > <parameter name="mail.pop3.host">localhost</parameter> > <parameter name="mail.pop3.user">red</parameter> > <parameter name="mail.store.protocol">pop3</parameter> > <parameter name="transport.mail.pop3.password">red</parameter> > <parameter > name="transport.mail.replyToAddress">r...@localhost</parameter> > <parameter name="transport.listener.interval">3000</parameter> > </transportReceiver>--> > > <!--Uncomment if you want to have TCP transport support--> > <!-- transportReceiver name="tcp" > class="org.apache.axis2.transport.tcp.TCPServer"> > <parameter name="port">6060</parameter --> > <!--If you want to give your own host address for EPR > generation--> > <!--uncomment the following paramter , and set it as you > required.--> > <!--<parameter name="hostname">tcp://myApp.com/ws</parameter>--> > <!-- /transportReceiver --> > > <!-- ================================================= --> > <!-- Transport Outs --> > <!-- ================================================= --> > > <transportSender name="tcp" > > class="org.apache.axis2.transport.tcp.TCPTransportSender"/> > <transportSender name="local" > > class="org.apache.axis2.transport.local.LocalTransportSender"/> > <transportSender name="http" > > class="org.apache.axis2.transport.http.CommonsHTTPTransportSender"> > <parameter name="PROTOCOL">HTTP/1.1</parameter> > <parameter name="Transfer-Encoding">chunked</parameter> > > <!-- If following is set to 'true', optional action part of the > Content-Type will not be added to the SOAP 1.2 messages --> > <!-- <parameter name="OmitSOAP12Action">true</parameter> --> > </transportSender> > > <transportSender name="https" > > class="org.apache.axis2.transport.http.CommonsHTTPTransportSender"> > <parameter name="PROTOCOL">HTTP/1.1</parameter> > <parameter name="Transfer-Encoding">chunked</parameter> > </transportSender> > > <!-- Please enable this if you need the java transport --> > <!-- <transportSender name="java" > > class="org.apache.axis2.transport.java.JavaTransportSender"/> --> > > <!--<transportSender name="jms"--> > > <!--class="org.apache.axis2.transport.jms.JMSSender"/>--> > > <!-- ================================================= --> > <!-- Non-blocking http/s Transport Sender --> > > <!-- the non-blocking http transport sender based on HttpCore + NIO > extensions > <transportSender name="http" > class="org.apache.axis2.transport.nhttp.HttpCoreNIOSender"> > <parameter name="non-blocking" locked="false">true</parameter> > </transportSender>--> > > <!-- the non-blocking https transport sender based on HttpCore + NIO > SSL extensions > <transportSender name="https" > class="org.apache.axis2.transport.nhttp.HttpCoreNIOSSLSender"> > <parameter name="non-blocking" locked="false">true</parameter> > <parameter name="keystore" locked="false"> > <KeyStore> > <Location>identity.jks</Location> > <Type>JKS</Type> > <Password>password</Password> > <KeyPassword>password</KeyPassword> > </KeyStore> > </parameter> > <parameter name="truststore" locked="false"> > <TrustStore> > <Location>trust.jks</Location> > <Type>JKS</Type> > <Password>password</Password> > </TrustStore> > </parameter>--> > <!--<parameter > name="HostnameVerifier">DefaultAndLocalhost</parameter> > supports Strict|AllowAll|DefaultAndLocalhost or the default if > none specified --> > <!--</transportSender>--> > > <!-- ================================================= --> > <!-- Mail Transport Sender --> > <!--Only need to uncomment the sender. Configuration is achieved with > every client. > At any instant mail host should be given. Sample configuration has > been given. > http://people.apache.org/~pzf/SMTPBase64Binding-0.2.html > --> > <!-- ================================================= --> > <!--<transportSender name="mailto" > class="org.apache.axis2.transport.mail.MailTransportSender"> > <parameter name="mail.smtp.host">localhost</parameter> > </transportSender>--> > > <!-- ================================================= --> > <!-- Global Modules --> > <!-- ================================================= --> > <!-- Comment this to disable Addressing --> > <module ref="addressing"/> > > <!--Configuring module , providing parameters for modules whether they > refer or not--> > <!--<moduleConfig name="addressing">--> > <!--<parameter name="addressingPara">N/A</parameter>--> > <!--</moduleConfig>--> > > <!-- ================================================= --> > <!-- Clustering --> > <!-- ================================================= --> > <!-- Configure and uncomment following for preparing Axis2 to a > clustered environment --> > <!-- > <cluster class="org.apache.axis2.cluster.tribes.TribesClusterManager"> > <parameter name="param1">value1</parameter> > <parameter name="domain">apache.axis2.domain</parameter> > <parameter name="synchronizeAll">true</parameter> > <parameter name="maxRetries">10</parameter> > <configurationManager > class="org.apache.axis2.cluster.configuration.TribesConfigurationManager"> > <listener > class="org.apache.axis2.cluster.configuration.DefaultConfigurationManagerListener"/> > </configurationManager> > <contextManager > class="org.apache.axis2.cluster.context.TribesContextManager"> > <listener > class="org.apache.axis2.cluster.context.DefaultContextManagerListener"/> > </contextManager> > </cluster> > --> > > <!-- ================================================= --> > <!-- Phases --> > <!-- ================================================= --> > <phaseOrder type="InFlow"> > <!-- System predefined phases --> > <phase name="Transport"> > <handler name="RequestURIBasedDispatcher" > > class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"> > <order phase="Transport"/> > </handler> > <handler name="SOAPActionBasedDispatcher" > > class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"> > <order phase="Transport"/> > </handler> > </phase> > <phase name="Addressing"> > <handler name="AddressingBasedDispatcher" > > class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> > <order phase="Addressing"/> > </handler> > </phase> > <phase name="Security"/> > <phase name="PreDispatch"/> > <phase name="Dispatch" > class="org.apache.axis2.engine.DispatchPhase"> > <handler name="RequestURIBasedDispatcher" > > class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> > <handler name="SOAPActionBasedDispatcher" > > class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> > <handler name="RequestURIOperationDispatcher" > > class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> > <handler name="SOAPMessageBodyBasedDispatcher" > > class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> > <handler name="HTTPLocationBasedDispatcher" > > class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> > <handler name="GenericProviderDispatcher" > > class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/> > <handler name="MustUnderstandValidationDispatcher" > > class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/> > </phase> > <phase name="RMPhase"/> > <phase name="meshaPhase"/> <!-- Yash --> > <!-- System predefined phases --> > <!-- After Postdispatch phase module author or service author > can add any phase he want --> > <phase name="OperationInPhase"> > <handler name="MustUnderstandChecker" > > class="org.apache.axis2.jaxws.dispatchers.MustUnderstandChecker"> > <order phase="OperationInPhase"/> > </handler> > </phase> > <phase name="soapmonitorPhase"/> > </phaseOrder> > <phaseOrder type="OutFlow"> > <!-- user can add his own phases to this area --> > <phase name="soapmonitorPhase"/> > <phase name="OperationOutPhase"/> > <!--system predefined phase--> > <!--these phase will run irrespective of the service--> > <phase name="meshaPhase"/> <!-- yash --> > <phase name="RMPhase"/> > <phase name="PolicyDetermination"/> > <phase name="MessageOut"/> > <phase name="Security"/> > </phaseOrder> > <phaseOrder type="InFaultFlow"> > <phase name="Addressing"> > <handler name="AddressingBasedDispatcher" > > class="org.apache.axis2.dispatchers.AddressingBasedDispatcher"> > <order phase="Addressing"/> > </handler> > </phase> > <phase name="Security"/> > <phase name="PreDispatch"/> > <phase name="Dispatch" > class="org.apache.axis2.engine.DispatchPhase"> > <handler name="RequestURIBasedDispatcher" > > class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/> > <handler name="SOAPActionBasedDispatcher" > > class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/> > <handler name="RequestURIOperationDispatcher" > > class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/> > <handler name="SOAPMessageBodyBasedDispatcher" > > class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/> > <handler name="HTTPLocationBasedDispatcher" > > class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/> > <handler name="GenericProviderDispatcher" > > class="org.apache.axis2.jaxws.dispatchers.GenericProviderDispatcher"/> > <handler name="MustUnderstandValidationDispatcher" > > class="org.apache.axis2.jaxws.dispatchers.MustUnderstandValidationDispatcher"/> > </phase> > <phase name="RMPhase"/> > <phase name="meshaPhase"/> <!-- Yash --> > <!-- user can add his own phases to this area --> > <phase name="OperationInFaultPhase"/> > <phase name="soapmonitorPhase"/> > </phaseOrder> > <phaseOrder type="OutFaultFlow"> > <!-- user can add his own phases to this area --> > <phase name="soapmonitorPhase"/> > <phase name="OperationOutFaultPhase"/> > <phase name="meshaPhase"/> <!-- Yash --> > <phase name="RMPhase"/> > <phase name="PolicyDetermination"/> > <phase name="MessageOut"/> > <phase name="Security"/> > </phaseOrder> > </axisconfig> > > I am getting the same error. Please suggest me how can i resolve this > issue. > > Thanks, > Swapna Soni. > > Amila Suriarachchi wrote: >> >> On Wed, Aug 19, 2009 at 9:44 PM, Senthil Sona <sws...@cisco.com> wrote: >> >>> >>> Hi Rampart team, >>> >>> In a client class we have our custom module and rampart engaged. >>> While >>> sending the request, we are setting some header tags in outflow handler >>> of >>> custom module. while request going out, first custom module's outflow >>> handler is executing then rampart module's outflow handler is executing. >>> When request goes til webservice, (webservice is also having rampart and >>> custom module engage), then webservice custom module's inflow handler is >>> executing. We have a code to extract custom header tags in inflow >>> handler. >>> But the custom header tags we have set in outflow handler is not coming >>> till >>> inflow handler. And in inflow handler the envelope is in encrypt form. >>> Could >>> you please tell me how to get these header values in inflow handler. >> >> >> If you look at the axis2.xml phases you can see the Out flow handler >> order >> is the reverse of inflow handler order. >> so when you add handlers you need to think like that. If custom out >> handler >> is before security phase in out flow then >> custom in handler should be after security phase in inflow. >> >> thanks, >> Amila. >> >>> >>> >>> Please reply as soon as possible. This is very urgent. >>> >>> Thanks, >>> Swapna Soni. >>> -- >>> View this message in context: >>> http://www.nabble.com/Unable-to-get-Header-tags-in-custom-module%27s-inflow-handler-tp25047272p25047272.html >>> Sent from the Axis - Dev mailing list archive at Nabble.com. >>> >>> >> >> >> -- >> Amila Suriarachchi >> WSO2 Inc. >> blog: http://amilachinthaka.blogspot.com/ >> >> > > -- View this message in context: http://www.nabble.com/Unable-to-get-Header-tags-in-custom-module%27s-inflow-handler-tp25047272p25168595.html Sent from the Axis - Dev mailing list archive at Nabble.com.
