Hi guys! I am unable to modify the root context of the services made available by the stand-alone version of the SimpleAxis2Server of the standard distribution of axis2 version 1.1.1.
Basically the default path of the services are: http://localhost:8080/axis2/services. I would like to change this to: http://localhost:8080/axis/services. From what I understand, I need to modify the tag on axis2.xml: <parameter name="context" locked="false">axis</parameter
.
I still cannot access the path: http://localhost:8080/axis/services . It re-directs to: http://localhost:8080/axis2/services. How do I accomplish this? Attached is my axis2.xml. Also, are there examples of how to create your own Embedded SimpleAxis2 Server? Thanks! Regards, Jonathan
<!-- /* * Copyright 2001-2004 The Apache Software Foundation. * * Licensed under the Apache License, Version 2.0 (the "License"); * you may not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an "AS IS" BASIS, * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ --> <axisconfig name="AxisJava2.0"> <!-- ================================================= --> <!-- Parameters --> <!-- ================================================= --> <parameter name="hotdeployment" locked="false">true</parameter> <parameter name="hotupdate" locked="false">false</parameter> <parameter name="enableMTOM" locked="false">false</parameter> <parameter name="enableSwA" locked="false">false</parameter> <!--Uncomment if you want to enable file caching for attachments --> <!--parameter name="cacheAttachments" locked="false">true</parameter> <parameter name="attachmentDIR" locked="false"></parameter> <parameter name="sizeThreshold" locked="false">4000</parameter--> <!--This will give out the timout of the configuration contexts, in seconds--> <parameter name="ConfigContextTimeoutInterval" locked="false">30</parameter> <!--During a fault, stacktrace can be sent with the fault message. The following flag will control --> <!--that behaviour.--> <parameter name="sendStacktraceDetailsWithFaults" locked="false">false</parameter> <!--If there aren't any information available to find out the fault reason, we set the message of the expcetion--> <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be --> <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag--> <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.--> <parameter name="DrillDownToRootCauseForFaultReason" locked="false">false</parameter> <parameter name="userName" locked="false">admin</parameter> <parameter name="password" locked="false">axis2</parameter> <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.--> <!--<parameter name="ServicesDirectory" locked="false">service</parameter>--> <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path--> <!--<parameter name="ModulesDirectory" locked="false">modules</parameter>--> <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context--> <!--root which can configured using the following contextRoot parameter--> <!--<parameter name="context`" locked="false">axis2</parameter>--> <parameter name="context`" locked="false">axxis</parameter> <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distingiush those endpoints--> <!--In case of a servlet, if you change this you have to manually change the settings of your servlet container to map this --> <!--context path to proper Axis2 servlets--> <!--<parameter name="servicePath" locked="false">services</parameter>--> <!--<parameter name="restPath" locked="false">rest</parameter>--> <!--Set the flag to true if you want to enable transport level session mangment--> <parameter name="manageTransportSession" locked="false">false</parameter> <!--Following two parameters will be used to handle REST in Axis2. The default settings will make Axis2 to have two--> <!--different endpoints, one for REST (AxisRESTServlet) one for SOAP message handling (AxisServlet). But following--> <!--parameters help to tweak the message handling of two main servlets. --> <!-- If the enableRESTInAxis2MainServlet is true, then Axis2MainServlet will handle both SOAP and REST messages --> <parameter name="enableRESTInAxis2MainServlet" locked="true">false</parameter> <!-- Following parameter will completely disable REST handling in both the servlets--> <parameter name="disableREST" locked="true">false</parameter> <!-- This will disable the separate servlet we have for REST handling. --> <parameter name="disableSeparateEndpointForREST" locked="true">false</parameter> <!-- If you have a frontend host which exposes this webservice using a different public URL --> <!-- use this parameter to override autodetected url --> <!--<parameter name="httpFrontendHostUrl" locked="false">https://someotherhost/context</parameter>--> <!-- The way of adding listener to the system--> <!-- <listener class="org.apache.axis2.ObserverIMPL">--> <!-- <parameter name="RSS_URL" locked="false">http://127.0.0.1/rss</parameter>--> <!-- </listener>--> <!-- ================================================= --> <!-- Message Receivers --> <!-- ================================================= --> <!--This is the Deafult Message Receiver for the system , if you want to have MessageReceivers for --> <!--all the other MEP implement it and add the correct entry to here , so that you can refer from--> <!--any operation --> <!--Note : You can ovride this for particular service by adding the same element with your requirement--> <messageReceivers> <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"; class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/> <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"; class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/> </messageReceivers> <!-- ================================================= --> <!-- Transport Ins --> <!-- ================================================= --> <transportReceiver name="http" class="org.apache.axis2.transport.http.SimpleHTTPServer"> <parameter name="port" locked="false">8080</parameter> <!-- Here is the complete list of supported parameters (see example settings further below): port: the port to listen on (default 6060) hostname: if non-null, url prefix used in reply-to endpoint references (default null) originServer: value of http Server header in outgoing messages (default "Simple-Server/1.1") requestTimeout: value in millis of time that requests can wait for data (default 20000) requestTcpNoDelay: true to maximize performance and minimize latency (default true) false to minimize bandwidth consumption by combining segments requestCoreThreadPoolSize: number of threads available for request processing (unless queue fills up) (default 25) requestMaxThreadPoolSize: number of threads available for request processing if queue fills us (default 150) note that default queue never fills up: see HttpFactory threadKeepAliveTime: time to keep threads in excess of core size alive while inactive (default 180) note that no such threads can exist with default unbounded request queue threadKeepAliveTimeUnit: TimeUnit of value in threadKeepAliveTime (default SECONDS) (default SECONDS) --> <!-- <parameter name="hostname" locked="false">http://www.myApp.com/ws</parameter> --> <!-- <parameter name="originServer" locked="false">My-Server/1.1</parameter> --> <!-- <parameter name="requestTimeout" locked="false">10000</parameter> --> <!-- <parameter name="requestTcpNoDelay" locked="false">false</parameter> --> <!-- <parameter name="requestCoreThreadPoolSize" locked="false">50</parameter> --> <!-- <parameter name="RequestMaxThreadPoolSize" locked="false">100</parameter> --> <!-- <parameter name="threadKeepAliveTime" locked="false">240000</parameter> --> <!-- <parameter name="threadKeepAliveTimeUnit" locked="false">MILLISECONDS</parameter> --> </transportReceiver> <!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ) <transportReceiver name="jms" class="org.apache.axis2.transport.jms.JMSListener"> <parameter name="myTopicConnectionFactory" locked="false"> <parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> <parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter> <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">TopicConnectionFactory</parameter> </parameter> <parameter name="myQueueConnectionFactory" locked="false"> <parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> <parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter> <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter> </parameter> <parameter name="default" locked="false"> <parameter name="java.naming.factory.initial" locked="false">org.apache.activemq.jndi.ActiveMQInitialContextFactory</parameter> <parameter name="java.naming.provider.url" locked="false">tcp://localhost:61616</parameter> <parameter name="transport.jms.ConnectionFactoryJNDIName" locked="false">QueueConnectionFactory</parameter> </parameter> </transportReceiver>--> <!--Uncomment if you want to have SMTP transport support--> <!--<transportReceiver name="mail" class="org.apache.axis2.transport.mail.SimpleMailListener">--> <!--<parameter name="transport.mail.pop3.host" locked="false">127.0.0.1</parameter>--> <!--<parameter name="transport.mail.pop3.user" locked="false">axis2</parameter>--> <!--<parameter name="transport.mail.pop3.password" locked="false">axis2</parameter>--> <!--<parameter name="transport.mail.pop3.port" locked="false">110</parameter>--> <!--<parameter name="transport.mail.replyToAddress" locked="false">[EMAIL PROTECTED]</parameter>--> <!--</transportReceiver>--> <!--Uncomment if you want to have TCP transport support--> <!--transportReceiver name="tcp" class="org.apache.axis2.transport.tcp.TCPServer"> <parameter name="port" locked="false">6060</parameter-->> <!--If you want to give your own host address for EPR generation--> <!--uncommet following paramter , and set as you required.--> <!--<parameter name="hostname" locked="false">tcp://myApp.com/ws</parameter>--> <!-- /transportReceiver --> <!-- ================================================= --> <!-- Transport Outs --> <!-- ================================================= --> <transportSender name="tcp" class="org.apache.axis2.transport.tcp.TCPTransportSender"/> <transportSender name="local" class="org.apache.axis2.transport.local.LocalTransportSender"/> <transportSender name="http" class="org.apache.axis2.transport.http.CommonsHTTPTransportSender"> <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter> <parameter name="Transfer-Encoding" locked="false">chunked</parameter> </transportSender> <transportSender name="https" class="org.apache.axis2.transport.http.CommonsHTTPTransportSender"> <parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter> <parameter name="Transfer-Encoding" locked="false">chunked</parameter> </transportSender> <!--Uncomment this and configure as appropriate for JMS transport support, after setting up your JMS environment (e.g. ActiveMQ) <transportSender name="jms" class="org.apache.axis2.transport.jms.JMSSender"/> --> <!-- Uncomment this one with the appropriate papameters to enable the SMTP transport Receiver <transportSender name="mailto" class="org.apache.axis2.transport.mail.MailTransportSender"> <parameter name="transport.mail.smtp.host" locked="false">127.0.0.1</parameter> <parameter name="transport.mail.smtp.user" locked="false">axis2</parameter> <parameter name="transport.mail.smtp.password" locked="false">axis2</parameter> <parameter name="transport.mail.smtp.port" locked="false">25</parameter> </transportSender> --> <!-- ================================================= --> <!-- Global Modules --> <!-- ================================================= --> <!-- Comment this to disable Addressing --> <module ref="addressing"/> <!--Configuring module , providing parameters for modules whether they refer or not--> <!--<moduleConfig name="addressing">--> <!--<parameter name="addressingPara" locked="false">N/A</parameter>--> <!--</moduleConfig>--> <!-- ================================================= --> <!-- Phases --> <!-- ================================================= --> <phaseOrder type="InFlow"> <!-- System pre defined phases --> <phase name="Transport"> <handler name="RequestURIBasedDispatcher" class="org.apache.axis2.engine.RequestURIBasedDispatcher"> <order phase="Transport"/> </handler> <handler name="SOAPActionBasedDispatcher" class="org.apache.axis2.engine.SOAPActionBasedDispatcher"> <order phase="Transport"/> </handler> </phase> <phase name="Security"/> <phase name="PreDispatch"/> <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> <handler name="AddressingBasedDispatcher" class="org.apache.axis2.engine.AddressingBasedDispatcher"> <order phase="Dispatch"/> </handler> <handler name="SOAPMessageBodyBasedDispatcher" class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher"> <order phase="Dispatch"/> </handler> <handler name="InstanceDispatcher" class="org.apache.axis2.engine.InstanceDispatcher"> <order phase="Dispatch"/> </handler> </phase> <!-- System pre defined phases --> <!-- After Postdispatch phase module author or or service author can add any phase he want --> <phase name="OperationInPhase"/> <phase name="soapmonitorPhase"/> </phaseOrder> <phaseOrder type="OutFlow"> <!-- user can add his own phases to this area --> <phase name="soapmonitorPhase"/> <phase name="OperationOutPhase"/> <!--system predefined phase--> <!--these phase will run irrespective of the service--> <phase name="PolicyDetermination"/> <phase name="MessageOut"/> <phase name="Security"/> </phaseOrder> <phaseOrder type="InFaultFlow"> <phase name="PreDispatch"/> <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase"> <handler name="RequestURIBasedDispatcher" class="org.apache.axis2.engine.RequestURIBasedDispatcher"> <order phase="Dispatch"/> </handler> <handler name="SOAPActionBasedDispatcher" class="org.apache.axis2.engine.SOAPActionBasedDispatcher"> <order phase="Dispatch"/> </handler> <handler name="AddressingBasedDispatcher" class="org.apache.axis2.engine.AddressingBasedDispatcher"> <order phase="Dispatch"/> </handler> <handler name="SOAPMessageBodyBasedDispatcher" class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher"> <order phase="Dispatch"/> </handler> <handler name="InstanceDispatcher" class="org.apache.axis2.engine.InstanceDispatcher"> <order phase="PostDispatch"/> </handler> </phase> <!-- user can add his own phases to this area --> <phase name="OperationInFaultPhase"/> <phase name="soapmonitorPhase"/> </phaseOrder> <phaseOrder type="OutFaultFlow"> <!-- user can add his own phases to this area --> <phase name="soapmonitorPhase"/> <phase name="OperationOutFaultPhase"/> <phase name="PolicyDetermination"/> <phase name="MessageOut"/> </phaseOrder> </axisconfig>
--------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
