I just did a new checkout from svn, to make absolutely sure I had a correct source tree. When I tried building that I had the same results as before, on both JDK 1.4.2 and 1.5 - everything runs fine up to the "Apache Axis 2.0 - Integration" tests, then almost everything has errors. Here's a partial listing of the errors:

test:test:
   [junit] Running samples.wsdl.perf.PerfPortTypeTest
   [junit] Tests run: 1, Failures: 0, Errors: 0, Time elapsed: 15.268 sec
   [junit] Running org.apache.axis2.integration.EchoTest
   [junit] Tests run: 1, Failures: 0, Errors: 0, Time elapsed: 0.332 sec
   [junit] Running org.apache.axis2.rpc.MultirefTest
   [junit] Tests run: 9, Failures: 0, Errors: 9, Time elapsed: 1.03 sec
   [junit] [ERROR] TEST org.apache.axis2.rpc.MultirefTest FAILED
   [junit] Running org.apache.axis2.rpc.RPCCallTest
   [junit] Tests run: 21, Failures: 0, Errors: 21, Time elapsed: 1.273 sec
   [junit] [ERROR] TEST org.apache.axis2.rpc.RPCCallTest FAILED
   [junit] Running org.apache.axis2.engine.EchoRawXMLOnTwoChannelsSyncTest
   [junit] Tests run: 1, Failures: 0, Errors: 1, Time elapsed: 0.857 sec
[junit] [ERROR] TEST org.apache.axis2.engine.EchoRawXMLOnTwoChannelsSyncTest FAILED
   [junit] Running org.apache.axis2.engine.ThreadingTest
   [junit] Tests run: 1, Failures: 0, Errors: 1, Time elapsed: 0.767 sec
   [junit] [ERROR] TEST org.apache.axis2.engine.ThreadingTest FAILED
   [junit] Running org.apache.axis2.engine.ServiceCreateTest
   [junit] Tests run: 1, Failures: 0, Errors: 1, Time elapsed: 0.887 sec
   [junit] [ERROR] TEST org.apache.axis2.engine.ServiceCreateTest FAILED
   ...

Am I the only one experiencing the errors in this set of tests? Is anyone running these tests successfully on Linux or Mac systems?

Thanks,

 - Dennis

Dennis Sosnoski wrote:

I don't normally use -o, but tried building Axiom and dropping it in the Maven repository, then did "maven clean" and "maven -o". I still get failures in "Apache Axis 2.0 - Integration", though. The same failures occur when I try building with Java 5. Anyone have any idea why "Apache Axis 2.0 - Integration" tests would fail consistently?

 - Dennis

Ajith Ranabahu wrote:

Hi all,
There was an Axiom change that broke the build for a while and now it
is fixed. I guess the Axiom jar should be upated by now. But if you
are in the habit of running the build with -o (offline) which makes
things faster, then you may still be having the older jar in your
maven  repository which could be the problem.
The safest thing you can do is to build Axiom by yourself and put the
jar inside the repo.

HTH

Ajith

On 3/19/06, Dennis Sosnoski <[EMAIL PROTECTED]> wrote:
I've also been getting repeated and consistent test failures over the
last week, despite updating to the latest SVN code every day. The first
error is with org.apache.axis2.engine.CallUnregisteredServiceTest, and
pretty much everything from that point on has errors. I'm running on
Linux, using JDK 1.4.2 from Sun. I do a "maven clean" first, then
"maven", and have MAVEN_OPTS=-Dversion_affix=dev

 - Dennis

Sean Doyle (Gmail) wrote:

Loreno Oliveira wrote:

I got also problems with some tests, just like Sean and Bruno.
My problem was fixed when I turned off the Norton Worm Protection...

No such luck here - I've turned off my Trend Micro, ran svn update,
and still see errors.

After

  [junit] [ERROR] TEST org.apache.axis2.rpc.RPCCallTest FAILED
[junit] Running org.apache.axis2.security.AddressingMTOMSecurityTest

you see

BUILD FAILED
File...... C:\Documents and
Settings\sean\.maven\cache\maven-multiproject-plugin-1.3.1\plugin.jelly
Element... maven:reactor
Line...... 217
Column.... 9
Unable to obtain goal [multiproject:install-callback] -- C:\Documents
and Settings\sean\.maven\cache\maven-test-plugin-1
.6.2\plugin.jelly:181:54: <fail> There were test failures.
Total time: 20 minutes 39 seconds
Finished at: Fri Mar 17 15:25:25 EST 2006

This was in response to a 'maven release'.


Now I'm building and testing axis2 fine...

Loreno

On 3/16/06, *Eran Chinthaka* <[EMAIL PROTECTED]
<mailto:[EMAIL PROTECTED]>> wrote:

   Hi Sean and Bruno,

   We experience a build failure in Axis2 main branch now. Please
give us
   time till tomoro for us to fix it.

   Thanks,
   Chinthaka

   Sean Doyle (Gmail) wrote:
   > bruno wanadoo wrote:
   >
   >> Hi Chinthaka & everybody else
   >>
   >> I followed instructions in the FAQ ( with jdk1.5 I modify the
   >> security file to add BC as provider)
   >> But when I launch maven , a lot of targets are built but at the
   end I
   >> got this
   >>
   > I'm getting the same
   >    Unable to obtain goal [multiproject:install-callback] --
   > C:\Documents and
   >

Settings\bruno\.maven\cache\maven-test-plugin-1.6.2\plugin.jelly:181:54:

   > I've also put in the same attribute for BC. And svn is current
   as of a
   > few minutes ago.
   >
   > Here's what works and doesn't work - I'm a bit confused by the
   site's
   > documentation since it has two different calls to maven
   specified for
> building the project. One fails with the plugin.jelly message, the
   > other works but doesn't make the war file.
   >
   > I'm running this in WindowsXP. My version of Maven is 1.0.2. My
   > version of Java is java version " 1.5.0_06".
   >
   >
   > According to http://ws.apache.org/axis2/svn.html - you just type
   > 'maven'. This fails -
   >
   >> test:test:
>> [junit] Running org.apache.axis2.om.impl.dom.DocumentImplTest
   >>     [junit] Tests run: 3, Failures: 0, Errors: 0, Time elapsed:
   0.39 sec
   >>     [junit] Running
   org.apache.axis2.om.impl.dom.DOMImplementationTest
   >>     [junit] Tests run: 1, Failures: 0, Errors: 0, Time elapsed:
   0.28 sec
>> [junit] Running org.apache.axis2.om.impl.dom.ElementImplTest
   >>     [junit] Tests run: 6, Failures: 0, Errors: 0, Time elapsed:
   0.381
   >> sec
   >>     [junit] Running org.apache.axis2.om.impl.dom.MessagesTest
   >>     [junit] Tests run: 4, Failures: 0, Errors: 4, Time elapsed:
   0.471
   >> sec
   >>     *[junit] [ERROR] TEST
org.apache.axis2.om.impl.dom.MessagesTest
   >> FAILED*
>> [junit] Running org.apache.axis2.om.impl.dom.OMDOMFactoryTest
   >>     [junit] Tests run: 1, Failures: 0, Errors: 0, Time elapsed:
   0.281
   >> sec
   >>     [junit] Running org.apache.axis2.om.impl.dom.TextImplTest
   >>     [junit] Tests run: 3, Failures: 0, Errors: 0, Time elapsed:
   0.28 sec
   >>
   >> BUILD FAILED
   >> File...... C:\Documents and
   >>

Settings\sean\.maven\cache\maven-multiproject-plugin-1.3.1\plugin.jelly

   >> Element... maven:reactor
   >> Line...... 217
   >> Column.... 9
   >> Unable to obtain goal [multiproject:install-callback] --
   C:\Documents
   >> and Settings\sean\.maven\cache\maven-test-plugin-1
   >> .6.2\plugin.jelly:181:54: <fail> There were test failures.
   >> Total time: 4 minutes 9 seconds
   >> Finished at: Thu Mar 16 10:22:34 EST 2006
   >
   >
> According to http://ws.apache.org/axis2/siteHowTo.html - you type
   > 'maven multiproject'. This worked yesterday - but it didn't
make the
   > war file. And - although it worked there are several errors of
   the sort:
   >
   >> Error retrieving artifact from
   >>

[http://www.ibiblio.org/maven/axis2/jars/axis2-codegen-0.95-SNAPSHOT.jar]:

   >> java.net.Conne
   >> ctException: Connection timed out: connect
   >> 192K downloaded
   >
   >
   >
   > Somewhere on the apache site there was a suggestion to use
   'maven.war'
   > - this failed with (I believe) the same plugin.jelly error.
   >
   > Also - I've been running 'maven clean' between runs if that
   makes any
   > difference.
   >
   > I did invoke
   >
   > %MAVEN_HOME%\bin\install_repo.bat c:\.maven\repository
   > when I installed Maven a few days ago.
   >
   > What should I try next if I want to build the war file?
   >
   >
   > Thanks..
   >
   > Sean
   >
   >>
   >>
   >> /+----------------------------------------
   >> | Executing multiproject:install-callback Apache Axis 2.0 - DOM
   over OM
   >> | Memory: 8M/12M
   >> +----------------------------------------
   >> Tentative de tÚlÚchargement de axiom-1.0-SNAPSHOT.jar .
   >> Tentative de tÚlÚchargement de axis2-common-0.95-SNAPSHOT.jar.
   >> Tentative de tÚlÚchargement de axis2-core-0.95-SNAPSHOT.jar.
   >>
   >> jar:jar:
   >>
   >> jar:install:
   >>
   >>
   >> build:end:
   >>
   >> build:start:
   >>
   >> multiproject:install-callback:
>> [echo] Running jar:install for Apache Axis 2.0 - DOM over OM
   >> java:prepare-filesystem:
   >>
   >> java:compile:
   >>     [echo] Compiling to
   D:\work\axis2-dev\modules\doom/target/classes
   >>
   >> java:jar-resources:
   >>
   >> test:prepare-filesystem:
   >>
   >> test:test-resources:
   >>
   >> test:compile:
   >>
   >> test:test:
>> [junit] Running org.apache.axis2.om.impl.dom.DocumentImplTest
   >>     [junit] Tests run: 3, Failures: 0, Errors: 0, Time elapsed:
   0,5 sec
   >>     [junit] Running
   org.apache.axis2.om.impl.dom.DOMImplementationTest
   >>     [junit] Tests run: 1, Failures: 0, Errors: 0, Time elapsed:
   0,39 sec
>> [junit] Running org.apache.axis2.om.impl.dom.ElementImplTest
   >>     [junit] Tests run: 6, Failures: 0, Errors: 0, Time elapsed:
   0,406
   >> sec
   >>     [junit] Running org.apache.axis2.om.impl.dom.MessagesTest
   >>     [junit] Tests run: 4, Failures: 0, Errors: 4, Time elapsed:
   0,672
   >> sec
   >>     [junit] [ERROR] TEST
org.apache.axis2.om.impl.dom.MessagesTest
   >> FAILED
>> [junit] Running org.apache.axis2.om.impl.dom.OMDOMFactoryTest
   >>     [junit] Tests run: 1, Failures: 0, Errors: 0, Time elapsed:
   0,296
   >> sec
   >>     [junit] Running org.apache.axis2.om.impl.dom.TextImplTest
   >>     [junit] Tests run: 3, Failures: 0, Errors: 0, Time elapsed:
   0,297
   >> sec
   >>
   >> BUILD FAILED
   >> File...... C:\Documents and
   >>

Settings\bruno\.maven\cache\maven-multiproject-plugin-1.3.1\plugin.jelly
   >> Element... maven:reactor
   >> Line...... 217
   >> Column.... 9
   >> Unable to obtain goal [multiproject:install-callback] --
   C:\Documents
   >> and
   >>

Settings\bruno\.maven\cache\maven-test-plugin-1.6.2\plugin.jelly:181:54:
   >> <fail> There were test failures.
   >> Total time: 2 minutes 11 seconds
   >> Finished at: Thu Mar 16 13:54:14 CET 2006
   >> /
   >>
   >> If someone has the answer , it will be nice
   >>
   >>
   >>
   >> Thanks in advance
   >>
   >>
   >> -----Message d'origine-----
   >> De : Eran Chinthaka [mailto: [EMAIL PROTECTED]
   <mailto:[EMAIL PROTECTED]>]
   >> Envoyé : jeudi 16 mars 2006 10:24
   >> À : [email protected] <mailto:[email protected]>
   >> Objet : Re: failure when trying to build axis2
   >>
   >> Hi Bruno,
   >>
   >> If you can exactly point out your problem, I may be able to
   help you.
   >>
   >> About the jars, yes there can be a slight problem, if maven
can not
   >> establish a connection to the repository properly.
   >>
   >> But since you have mentioned that your build is successful, I
don't
   >> think you still have problems with your jars.
   >>
   >> Are you having problems with tests ? If you are using jdk5,
please
   >> make sure you follow the tips given in the FAQ.
   >>
   >> -- Chinthaka
   >>
   >> bruno wanadoo wrote:
   >> > Hi to all
   >> > I had the same problem myself with wersion 0.94
   >> >
   >> > After download latest sources from svn everything works fine
   and at
   >> > last the build is successful But I still have problem with
   sme of the
   >> > tests
   >> >
   >> >
   >>

---------------------------------------------------------------------------------------

   >>
   >> Wanadoo vous informe que cet  e-mail a ete controle par
   l'anti-virus
   >> mail.
   >> Aucun virus connu a ce jour par nos services n'a ete detecte.
   >>
   >>
   >
   >






--
Ajith Ranabahu


Reply via email to