Thanks Ali for your comments. But in my case I do not use WSDL and code generation for stubs and skeletons. I wrote my service "by hand". All works fine except the ErrorHandling I have to configure.
Any other suggestions concerning the UserException and AxisFault issue depicted below?? Bille > -----Ursprüngliche Nachricht----- > Von: [email protected] > Gesendet: 01.06.06 23:46:06 > An: [email protected] > Betreff: Re: [axis2] problem with Userexception and AxisFault > Hi Billie, > > If I do not get wrong, you did not define a fault for your operation in > WSDL and also did not generate the service skeleton from the WSDL by > using WSDL2Java. > > For my application, I generate the code from WSDL and the generator > adds exception inner class in stub and skeleton successfully. > > You may find excerpt from my codes below. > > Hope this helps. > > Ali Sadik Kumlali > > > > ------------------------------------------------- > XSD > ------------------------------------------------- > ... > <xs:element name="BusinessException" type="tns:BusinessExceptionType" > /> > <xs:complexType name="BusinessExceptionType"> > <xs:sequence> > <xs:element name="errorCode" type="tns:ErrorCodeType" /> > <xs:element name="errorMessage" type="tns:DescriptionType" /> > <xs:element name="stackTrace" type="tns:LongDescriptionType" > minOccurs="0" /> > </xs:sequence> > </xs:complexType> > ... > > > ------------------------------------------------- > WSDL > ------------------------------------------------- > ... > <message name="BusinessExceptionSoapFault"> > <part name="parameters" element="t:BusinessException" /> > </message> > ... > <portType name="AccountServicesPortType"> > <operation name="OpenAccount"> > <input message="tns:OpenAccountSoapIn" /> > <output message="tns:OpenAccountSoapOut" /> > <fault name="BusinessException" > message="tns:BusinessExceptionSoapFault" /> > </operation> > ... > > > ------------------------------------------------- > Skeleton (auto-generated and manually customized) > ------------------------------------------------- > // Not auto-generated. I added this to the skeleton file. > protected BusinessExceptionSoapFaultException createBusinessException > (MyAppException e) { > BusinessExceptionDocument doc = BusinessExceptionDocument.Factory > .newInstance(); > BusinessExceptionType type = BusinessExceptionType.Factory > .newInstance(); > type.setErrorCode(e.getCode()); > type.setErrorMessage(e.getSimpleMessage()); > type.setStackTrace(Tools.stackTraceToString(e)); > doc.setBusinessException(type); > > BusinessExceptionSoapFaultException ex = new > BusinessExceptionSoapFaultException(); > ex.setFaultMessage(doc); > return ex; > } > > // Auto generated signature. I filled inside. > public acme.schemas.account.OpenAccountResponseDocument OpenAccount( > acme.account.OpenAccountDocument param4) > throws > acme.definitions.account.AccountServicesSkeleton.BusinessExceptionSoapFaultException > { > try { > // make call to the backend application > } catch (MyAppException e) { > throw createBusinessException (e); > } > } > > // Auto generated. I did nothing here. > public static class BusinessExceptionSoapFaultException extends > java.rmi.RemoteException { > private acme.schemas.types.BusinessExceptionDocument faultMessage; > public void > setFaultMessage(acme.schemas.types.BusinessExceptionDocument msg){ > faultMessage = msg; > } > public acme.schemas.types.BusinessExceptionDocument getFaultMessage() > { > return faultMessage; > } > } > > > ------------------------------------------------- > In-out message receiver (auto-generated) > ------------------------------------------------- > ... > > public void invokeBusinessLogic(org.apache.axis2.context.MessageContext > msgContext, org.apache.axis2.context.MessageContext newMsgContext) > throws org.apache.axis2.AxisFault { > try { > ... > } catch > (acme.definitions.account.AccountServicesSkeleton.BusinessExceptionSoapFaultException > e) { > org.apache.axis2.AxisFault f = > new > org.apache.axis2.AxisFault("BusinessExceptionSoapFaultException"); > f.setDetail(toOM(e.getFaultMessage(),false)); > throw f; > } catch (Exception e) { > throw org.apache.axis2.AxisFault.makeFault(e); > } > } > > > ------------------------------------------------- > Stub (auto-generated) > ------------------------------------------------- > ... > // Auto generated. I did nothing here. Please note that > // this exception inner class also reside in skeleton. > public static class BusinessExceptionSoapFaultException extends > java.rmi.RemoteException { > private acme.schemas.types.BusinessExceptionDocument faultMessage; > public void > setFaultMessage(acme.schemas.types.BusinessExceptionDocument msg){ > faultMessage = msg; > } > public acme.schemas.types.BusinessExceptionDocument getFaultMessage() > { > return faultMessage; > } > } > > > ------------------------------------------------- > Client test code (auto-generated and manually customized) > ------------------------------------------------- > public void testOpenAccount() throws java.lang.Exception { > try { > // make call to the service by using the stub. > ... > } catch > (acme.definitions.account.AccountServicesStub.BusinessExceptionSoapFaultException) > { > // Auto-generated stub code also includes > ... > } > } > > > --- [EMAIL PROTECTED] wrote: > > > Hi Ali Sadik Kumlali, > > > > I use Axis2 1.0, too. > > Do you have any Sample? Did you find any missing thing in my source > > at first glance ? > > > > Thanks for your help > > > > Bille > > > > > -----Ursprï¿œngliche Nachricht----- > > > Von: [email protected] > > > Gesendet: 01.06.06 16:00:14 > > > An: [email protected] > > > Betreff: Re: [axis2] problem with Userexception and AxisFault > > > > > > > Hi Bille, > > > > > > Which Axis2 version do you use? I don't have any problems with 1.0 > > when > > > using custom exceptions. > > > > > > Regards, > > > > > > Ali Sadik Kumlali > > > > > > --- [EMAIL PROTECTED] wrote: > > > > > > > Hi to the list, > > > > > > > > I have a service implementation which throws an UserException > > > > (MyException extends RemoteException). > > > > All works fine, but in the response I could not find my > > individual > > > > message and details. It just looks like this: > > > > > > > > <soapenv:Fault> > > > > <faultcode>soapenv:Client</faultcode> > > > > <faultstring>unknown</faultstring> > > > > <detail> > > > > <Exception> > > > > org.apache.axis2.AxisFault > > > > at > > > > > > > > > > org.apache.axis2.receivers.RawXMLINOutMessageReceiver.invokeBusinessLogic(RawXMLINOutMessageReceiver.java:102) > > > > at > > > > > > > > > > org.apache.axis2.receivers.AbstractInOutSyncMessageReceiver.receive(AbstractInOutSyncMessageReceiver.java:37) > > > > at > > > > org.apache.axis2.engine.AxisEngine.receive(AxisEngine.java:454) > > > > at > > > > > > > > > > org.apache.axis2.transport.http.HTTPTransportUtils.processHTTPPostRequest(HTTPTransportUtils.java:284) > > > > at > > > > > > > > > > org.apache.axis2.transport.http.AxisServlet.doPost(AxisServlet.java:136) > > > > at javax.servlet.http.HttpServlet.service(HttpServlet.java:709) > > > > at > > > > javax.servlet.http.HttpServlet.service(HttpServlet.java:802) > > > > at > > > > > > > > > > org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:237) > > > > at > > > > > > > > > > org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:157) > > > > at > > > > > > > > > > org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:214) > > > > at > > > > > > > > > > org.apache.catalina.core.StandardValveContext.invokeNext(StandardValveContext.java:104) > > > > .... > > > > </Exception> > > > > </detail> > > > > </soapenv:Fault> > > > > .... > > > > > > > > I debugged the service, and in class > > > > RawXMLINOutMessageReceiver::invokeBusinessLogic() my > > service-method > > > > is called and throws the exception. The exception is of type > > > > InvocationTargetException and has as a member variable called > > > > "target" my userdefined excpetion, with all the details and > > messages > > > > I defined. > > > > invokeBusinessLogic() catches this exception and throws an > > AxisFault > > > > using my userException, like this: > > > > throw new AxisFault(e.getMessage()); > > > > The message member of the InvocationTargetException is null !! so > > all > > > > my user definitions are gone. > > > > > > > > Could someone please shed some light on this. Is there any other > > > > setting I missed. > > > > I nearly grow insane with that. > > > > > > > > By the way, the strange thing is that the faultCode says > > > > soapenv:Client !!! > > > > > > > > Thanks a lot for any hints. > > > > I was not able to find any tutorial or HowTo on ErrorHandling in > > > > Axis...?! > > > > > > > > Bille > > > > ______________________________________________________________ > > > > Verschicken Sie romantische, coole und witzige Bilder per SMS! > > > > Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193 > > > > > > > > > > > > > > --------------------------------------------------------------------- > > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > > > > > > > > __________________________________________________ > > > Do You Yahoo!? > > > Tired of spam? Yahoo! Mail has the best spam protection around > > > http://mail.yahoo.com > > > > > > > > --------------------------------------------------------------------- > > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > > > ______________________________________________________________________ > > XXL-Speicher, PC-Virenschutz, Spartarife & mehr: Nur im WEB.DE Club! > > > > Jetzt gratis testen! > > http://freemail.web.de/home/landingpad/?mc=021130 > > > > > > --------------------------------------------------------------------- > > To unsubscribe, e-mail: [EMAIL PROTECTED] > > For additional commands, e-mail: [EMAIL PROTECTED] > > > > > > > > __________________________________________________ > Do You Yahoo!? > Tired of spam? Yahoo! Mail has the best spam protection around > http://mail.yahoo.com > > --------------------------------------------------------------------- > To unsubscribe, e-mail: [EMAIL PROTECTED] > For additional commands, e-mail: [EMAIL PROTECTED] > ______________________________________________________________ Verschicken Sie romantische, coole und witzige Bilder per SMS! Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193 --------------------------------------------------------------------- To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
