can you see what is wrong with my axis2.xml?
i have tried so many different configuration.
<axisconfig name="AxisJava2.0">
<!-- ================================================= -->
<!-- Parameters -->
<!-- ================================================= -->
<parameter name="hotdeployment" locked="false">true</parameter>
<parameter name="hotupdate" locked="false">false</parameter>
<parameter name="enableMTOM" locked="false">true</parameter>
<parameter name="cacheAttachments" locked="false">true</parameter>
<parameter name="attachmentDIR"
locked="false">/users/alice3/home/</parameter>
<parameter name="sizeThreshold" locked="false">4000</parameter>
<!--This will give out the timout of the configuration contexts, in
seconds-->
<parameter name="ConfigContextTimeoutInterval"
locked="false">30</parameter>
<!--During a fault, stacktrace can be sent with the fault message.
The
following flag will control -->
<!--that behaviour.-->
<parameter name="sendStacktraceDetailsWithFaults"
locked="false">true</parameter>
<!--If there aren't any information available to find out the fault
reason, we set the message of the expcetion-->
<!--as the faultreason/Reason. But when a fault is thrown from a
service
or some where, it will be -->
<!--wrapped by different levels. Due to this the initial exception
message can be lost. If this flag-->
<!--is set then, Axis2 tries to get the first exception and set its
message as the faultreason/Reason.-->
<parameter name="DrillDownToRootCauseForFaultReason"
locked="false">false</parameter>
<parameter name="userName" locked="false">admin</parameter>
<parameter name="password" locked="false">axis2</parameter>
<!--<parameter name="contextPath" locked="false">axis2</parameter>-->
<!--<parameter name="servicePath"
locked="false">services</parameter>-->
<!--Set the flag to true if you want to enable transport level
session
mangment-->
<parameter name="manageTransportSession"
locked="false">false</parameter>
<!-- If you have a frontend host which exposes this webservice using
a
different public URL -->
<!-- use this parameter to override autodetected url -->
<!--<parameter name="httpFrontendHostUrl"
locked="false">https://someotherhost/context</parameter>-->
<!-- The way of adding listener to the system-->
<!-- <listener class="org.apache.axis2.ObserverIMPL">-->
<!-- <parameter name="RSS_URL"
locked="false">http://127.0.0.1/rss</parameter>-->
<!-- </listener>-->
<!-- ================================================= -->
<!-- Message Receivers -->
<!-- ================================================= -->
<!--This is the Deafult Message Receiver for the system , if you want
to
have MessageReceivers for -->
<!--all the other MEP implement it and add the correct entry to here
,
so that you can refer from-->
<!--any operation -->
<!--Note : You can ovride this for particular service by adding the
same
element with your requirement-->
<messageReceivers>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only";
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out";
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
</messageReceivers>
<!-- ================================================= -->
<!-- Transport Ins -->
<!-- ================================================= -->
<transportReceiver name="http"
class="org.apache.axis2.transport.http.SimpleHTTPServer">
<parameter name="port" locked="false">6060</parameter>
<parameter name="CONNECTION_TIMEOUT" locked="false">0</parameter>
<parameter name="SO_TIMEOUT" locked="false">0</parameter>
<!-- Here is the complete list of supported parameters (see example
settings further below):
port: the port to listen on (default 6060)
hostname: if non-null, url prefix used in reply-to endpoint
references (default null)
originServer: value of http Server header in outgoing messages
(default "Simple-Server/1.1")
requestTimeout: value in millis of time that requests can wait
for
data (default 20000)
requestTcpNoDelay: true to maximize performance and minimize
latency (default true)
false to minimize bandwidth consumption by
combining segments
requestCoreThreadPoolSize: number of threads available for
request
processing (unless queue fills up) (default 25)
requestMaxThreadPoolSize: number of threads available for
request
processing if queue fills us (default 150)
note that default queue never fills
up:
see HttpFactory
threadKeepAliveTime: time to keep threads in excess of core size
alive while inactive (default 180)
note that no such threads can exist with
default unbounded request queue
threadKeepAliveTimeUnit: TimeUnit of value in
threadKeepAliveTime
(default SECONDS) (default SECONDS)
-->
<!-- <parameter name="hostname"
locked="false">http://www.myApp.com/ws</parameter> -->
<!-- <parameter name="originServer"
locked="false">My-Server/1.1</parameter> -->
<!-- <parameter name="requestTimeout"
locked="false">10000</parameter> -->
<!-- <parameter name="requestTcpNoDelay"
locked="false">false</parameter> -->
<!-- <parameter name="requestCoreThreadPoolSize"
locked="false">50</parameter> -->
<!-- <parameter name="RequestMaxThreadPoolSize"
locked="false">100</parameter> -->
<!-- <parameter name="threadKeepAliveTime"
locked="false">240000</parameter> -->
<!-- <parameter name="threadKeepAliveTimeUnit"
locked="false">MILLISECONDS</parameter> -->
</transportReceiver>
<!--Uncomment if you want to have SMTP transport support-->
<!--<transportReceiver name="mail"
class="org.apache.axis2.transport.mail.SimpleMailListener">-->
<!--<parameter name="transport.mail.pop3.host"
locked="false">127.0.0.1</parameter>-->
<!--<parameter name="transport.mail.pop3.user"
locked="false">axis2</parameter>-->
<!--<parameter name="transport.mail.pop3.password"
locked="false">axis2</parameter>-->
<!--<parameter name="transport.mail.pop3.port"
locked="false">110</parameter>-->
<!--<parameter name="transport.mail.replyToAddress"
locked="false">[EMAIL PROTECTED]</parameter>-->
<!--</transportReceiver>-->
<transportReceiver name="tcp"
class="org.apache.axis2.transport.tcp.TCPServer">
<parameter name="port" locked="false">6060</parameter>
<!--If you want to give your own host address for EPR
generation-->
<!--uncommet following paramter , and set as you required.-->
<!--<parameter name="hostname"
locked="false">tcp://myApp.com/ws</parameter>-->
</transportReceiver>
<!--Uncomment this if you want JMS transport support-->
<!--<transportReceiver name="jms"
class="org.apache.axis2.transport.jms.SimpleJMSListener">-->
<!--<parameter name="transport.jms.Destination"
locked="false">dynamicQueues/FOO</parameter>-->
<!--<parameter name="java.naming.factory.initial" locked="false">-->
<!--org.activemq.jndi.ActiveMQInitialContextFactory</parameter>-->
<!--<parameter name="java.naming.provider.url"
locked="false">tcp://localhost:61616</parameter>-->
<!--</transportReceiver>-->
<!-- ================================================= -->
<!-- Transport Outs -->
<!-- ================================================= -->
<transportSender name="tcp"
class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
<transportSender name="local"
class="org.apache.axis2.transport.local.LocalTransportSender"/>
<transportSender name="jms"
class="org.apache.axis2.transport.jms.JMSSender"/>
<transportSender name="http"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding"
locked="false">chunked</parameter>
</transportSender>
<transportSender name="https"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding"
locked="false">chunked</parameter>
</transportSender>
<!-- Uncomment this one with the appropriate papameters to enable the
SMTP transport Receiver
<transportSender name="mailto"
class="org.apache.axis2.transport.mail.MailTransportSender">
<parameter name="transport.mail.smtp.host"
locked="false">127.0.0.1</parameter>
<parameter name="transport.mail.smtp.user"
locked="false">axis2</parameter>
<parameter name="transport.mail.smtp.password"
locked="false">axis2</parameter>
<parameter name="transport.mail.smtp.port"
locked="false">25</parameter>
</transportSender>
-->
<!-- ================================================= -->
<!-- Global Modules -->
<!-- ================================================= -->
<!-- Comment this to disable Addressing -->
<module ref="addressing"/>
<module ref="rampart"/>
<module ref="soapmonitor"/>
<!--Configuring module , providing parameters for modules whether
they
refer or not-->
<!--<moduleConfig name="addressing">-->
<!--<parameter name="addressingPara"
locked="false">N/A</parameter>-->
<!--</moduleConfig>-->
<!-- ================================================= -->
<!-- Phases -->
<!-- ================================================= -->
<phaseOrder type="inflow">
<!-- System pre defined phases -->
<phase name="Transport">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Dispatch"/>
</handler>
</phase>
<phase name="Security"/>
<phase name="PreDispatch"/>
<phase name="Dispatch"
class="org.apache.axis2.engine.DispatchPhase">
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="PostDispatch"/>
</handler>
</phase>
<!-- System pre defined phases -->
<!-- After Postdispatch phase module author or or service
author
can add any phase he want -->
<phase name="OperationInPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="outflow">
<!-- user can add his own phases to this area -->
<phase name="OperationOutPhase"/>
<phase name="soapmonitorPhase"/>
<!--system predefined phase-->
<!--these phase will run irrespective of the service-->
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
</phaseOrder>
<phaseOrder type="INfaultflow">
<phase name="PreDispatch"/>
<phase name="Dispatch"
class="org.apache.axis2.engine.DispatchPhase">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="PostDispatch"/>
</handler>
</phase>
<!-- user can add his own phases to this area -->
<phase name="OperationInFaultPhase"/>
<phase name="soapmonitorPhase"/>
</phaseOrder>
<phaseOrder type="Outfaultflow">
<!-- user can add his own phases to this area -->
<phase name="OperationOutFaultPhase"/>
<phase name="soapmonitorPhase"/>
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
</phaseOrder>
</axisconfig>
Thank you,
Sathita
>From: "robert lazarski" <[EMAIL PROTECTED]>
>Reply-To: [email protected]
>To: [email protected]
>Subject: Re: [Axis2 v1.0] soapmonitor, how to use
>Date: Wed, 5 Jul 2006 09:21:56 -0300
>
>You need to have the following in the four phases, inflow, outflow,
>INfaultflow, Outfaultflow :
>
><phase name="soapmonitorPhase"/>
>
>Ordering is important, it should be the last entry in the phase.
>Reference the docs to see the example.
>
>Also, make sure you have the <module ref="soapmonitor"/> either in
>the axis2.xml file next to the addressing ref, or alternatively, in
>your services.xml .
>
>HTH,
>Robert
>http://www.braziloutsource.com/
>
>On 7/5/06, Wan Kaveevivitchai <[EMAIL PROTECTED]> wrote:
>>
>>thank you, i have been follow all of them, before sending the first
>>message.
>>But i don't quite understand where should i make change in axis2.xml?
>>
>>Best regards,
>>Sathita
>>
>> >From: [EMAIL PROTECTED]
>> >Reply-To: [email protected]
>> >To: [email protected]
>> >Subject: Re: [Axis2 v1.0] soapmonitor, how to use
>> >Date: Wed, 05 Jul 2006 13:54:04 +0200
>> >
>> >Hi,
>> >have a look at this:
>>http://ws.apache.org/axis2/1_0/soapmonitor-module.html
>> >
>> >HTH Bille
>> >
>> > > -----Urspr�ngliche Nachricht-----
>> > > Von: [email protected]
>> > > Gesendet: 05.07.06 13:21:15
>> > > An: [email protected]
>> > > Betreff: [Axis2 v1.0] soapmonitor, how to use
>> >
>> >
>> > > Dear All,
>> > >
>> > > I did deploy soapmonitor module, and i now can see the
Applet
>>but
>> > > it's actually cannot catch any soap passed. i think it's probably
>>need
>> >to
>> > > validate or do some proper deployment. I went to administration
page
>>of
>> > > axis2 try to engage module globally, and it gave me this:
>> > >
>> > > Invalid phases please recheck axis2.xml soapmonitorPhase for the
>>handler
>> > > InFlowSOAPMonitorHandler
>> > >
>> > > what should i do? and how i suppose to configure axis2.xml?
>> > > there is nothing clear in the documentation.
>> > >
>> > > Thank you, really appreciate
>> > >
>> > > Sathita
>> > >
>> > >
>> > >
>> > >
---------------------------------------------------------------------
>> > > To unsubscribe, e-mail: [EMAIL PROTECTED]
>> > > For additional commands, e-mail: [EMAIL PROTECTED]
>> > >
>> >
>> >
>> >______________________________________________________________
>> >Verschicken Sie romantische, coole und witzige Bilder per SMS!
>> >Jetzt bei WEB.DE FreeMail: http://f.web.de/?mc=021193
>> >
>> >
>> >---------------------------------------------------------------------
>> >To unsubscribe, e-mail: [EMAIL PROTECTED]
>> >For additional commands, e-mail: [EMAIL PROTECTED]
>> >
>>
>>
>>
>>---------------------------------------------------------------------
>>To unsubscribe, e-mail: [EMAIL PROTECTED]
>>For additional commands, e-mail: [EMAIL PROTECTED]
>>
>>
>
>---------------------------------------------------------------------
>To unsubscribe, e-mail: [EMAIL PROTECTED]
>For additional commands, e-mail: [EMAIL PROTECTED]
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
