Hi David,
Thanks for response.
As per my knowledge addressing module is engaged by default.
Find below axi2.xml:
Location: C:\Apache\axis2\webapps\WEB-INF\conf
<axisconfig name="AxisJava2.0">
<!-- ================================================= -->
<!-- Parameters -->
<!-- ================================================= -->
<parameter name="hotdeployment" locked="false">true</parameter>
<parameter name="hotupdate" locked="false">false</parameter>
<parameter name="enableMTOM" locked="false">false</parameter>
<!--During a fault, stacktrace can be sent with the fault message.
The following flag will control -->
<!--that behaviour.-->
<parameter name="sendStacktraceDetailsWithFaults"
locked="false">true</parameter>
<!--If there aren't any information available to find out the fault
reason, we set the message of the expcetion-->
<!--as the faultreason/Reason. But when a fault is thrown from a
service or some where, it will be -->
<!--wrapped by different levels. Due to this the initial exception
message can be lost. If this flag-->
<!--is set then, Axis2 tries to get the first exception and set its
message as the faultreason/Reason.-->
<parameter name="DrillDownToRootCauseForFaultReason"
locked="false">false</parameter>
<parameter name="userName" locked="false">admin</parameter>
<parameter name="password" locked="false">axis2</parameter>
<!-- If you have a frontend host which exposes this webservice using
a different public URL -->
<!-- use this parameter to override autodetected url -->
<!--<parameter name="httpFrontendHostUrl"
locked="false">https://someotherhost/context</parameter>-->
<!-- The way of adding listener to the system-->
<!-- <listener class="org.apache.axis2.ObserverIMPL">-->
<!-- <parameter name="RSS_URL"
locked="false">http://127.0.0.1/rss</parameter>-->
<!-- </listener>-->
<!-- ================================================= -->
<!-- Message Receivers -->
<!-- ================================================= -->
<!--This is the Deafult Message Receiver for the system , if you
want to have MessageReceivers for -->
<!--all the other MEP implement it and add the correct entry to here
, so that you can refer from-->
<!--any operation -->
<!--Note : You can ovride this for particular service by adding the
same element with your requirement-->
<messageReceivers>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only";
class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
<messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out";
class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
</messageReceivers>
<!-- ================================================= -->
<!-- Transport Ins -->
<!-- ================================================= -->
<transportReceiver name="http"
class="org.apache.axis2.transport.http.SimpleHTTPServer">
<parameter name="port" locked="false">6060</parameter>
<!--If you want to give your own host address for EPR
generation-->
<!--uncommet following paramter , and set as you required.-->
<!--<parameter name="hostname"
locked="false">http://myApp.com/ws</parameter>-->
</transportReceiver>
<!--Uncomment if you want to have SMTP transport support-->
<!--<transportReceiver name="mail"
class="org.apache.axis2.transport.mail.SimpleMailListener">-->
<!--<parameter name="transport.mail.pop3.host"
locked="false">127.0.0.1</parameter>-->
<!--<parameter name="transport.mail.pop3.user"
locked="false">axis2</parameter>-->
<!--<parameter name="transport.mail.pop3.password"
locked="false">axis2</parameter>-->
<!--<parameter name="transport.mail.pop3.port"
locked="false">110</parameter>-->
<!--<parameter name="transport.mail.replyToAddress"
locked="false">[EMAIL PROTECTED]</parameter>-->
<!--</transportReceiver>-->
<transportReceiver name="tcp"
class="org.apache.axis2.transport.tcp.TCPServer">
<parameter name="port" locked="false">6060</parameter>
<!--If you want to give your own host address for EPR
generation-->
<!--uncommet following paramter , and set as you required.-->
<!--<parameter name="hostname"
locked="false">tcp://myApp.com/ws</parameter>-->
</transportReceiver>
<!--Uncomment this if you want JMS transport support-->
<!--<transportReceiver name="jms"
class="org.apache.axis2.transport.jms.SimpleJMSListener">-->
<!--<parameter name="transport.jms.Destination"
locked="false">dynamicQueues/FOO</parameter>-->
<!--<parameter name="java.naming.factory.initial" locked="false">-->
<!--org.activemq.jndi.ActiveMQInitialContextFactory</parameter>-->
<!--<parameter name="java.naming.provider.url"
locked="false">tcp://localhost:61616</parameter>-->
<!--</transportReceiver>-->
<!-- ================================================= -->
<!-- Transport Outs -->
<!-- ================================================= -->
<transportSender name="tcp"
class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
<transportSender name="local"
class="org.apache.axis2.transport.local.LocalTransportSender"/>
<transportSender name="jms"
class="org.apache.axis2.transport.jms.JMSSender"/>
<transportSender name="http"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding"
locked="false">chunked</parameter>
</transportSender>
<transportSender name="https"
class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
<parameter name="PROTOCOL" locked="false">HTTP/1.1</parameter>
<parameter name="Transfer-Encoding"
locked="false">chunked</parameter>
</transportSender>
<!-- Uncomment this one with the appropriate papameters to enable
the SMTP transport Receiver
<transportSender name="mailto"
class="org.apache.axis2.transport.mail.MailTransportSender">
<parameter name="transport.mail.smtp.host"
locked="false">127.0.0.1</parameter>
<parameter name="transport.mail.smtp.user"
locked="false">axis2</parameter>
<parameter name="transport.mail.smtp.password"
locked="false">axis2</parameter>
<parameter name="transport.mail.smtp.port"
locked="false">25</parameter>
</transportSender>
-->
<!-- ================================================= -->
<!-- Global Modules -->
<!-- ================================================= -->
<!-- Comment this to disable Addressing -->
<module ref="addressing"/>
<module ref="soapmonitor"/>
<!--Configuring module , providing parameters for modules whether
they refer or not-->
<!--<moduleConfig name="addressing">-->
<!--<parameter name="addressingPara"
locked="false">N/A</parameter>-->
<!--</moduleConfig>-->
<!-- ================================================= -->
<!-- Phases -->
<!-- ================================================= -->
<phaseOrder type="inflow">
<!-- System pre defined phases -->
<phase name="Transport">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Dispatch"/>
</handler>
</phase>
<phase name="Security"/>
<phase name="PreDispatch"/>
<phase name="Dispatch"
class="org.apache.axis2.engine.DispatchPhase">
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="PostDispatch"/>
</handler>
</phase>
<!-- System pre defined phases -->
<!-- After Postdispatch phase module author or or service
author can add any phase he want -->
<phase name="soapmonitorPhase"/>
<phase name="OperationInPhase"/>
<phase name="RMPhase"/>
</phaseOrder>
<phaseOrder type="outflow">
<!-- user can add his own phases to this area -->
<phase name="RMPhase"/>
<phase name="soapmonitorPhase"/>
<phase name="OperationOutPhase"/>
<!--system predefined phase-->
<!--these phase will run irrespective of the service-->
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
</phaseOrder>
<phaseOrder type="INfaultflow">
<phase name="PreDispatch"/>
<phase name="soapmonitorPhase"/>
<phase name="Dispatch"
class="org.apache.axis2.engine.DispatchPhase">
<handler name="RequestURIBasedDispatcher"
class="org.apache.axis2.engine.RequestURIBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPActionBasedDispatcher"
class="org.apache.axis2.engine.SOAPActionBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="AddressingBasedDispatcher"
class="org.apache.axis2.engine.AddressingBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="SOAPMessageBodyBasedDispatcher"
class="org.apache.axis2.engine.SOAPMessageBodyBasedDispatcher">
<order phase="Dispatch"/>
</handler>
<handler name="InstanceDispatcher"
class="org.apache.axis2.engine.InstanceDispatcher">
<order phase="PostDispatch"/>
</handler>
</phase>
<!-- user can add his own phases to this area -->
<phase name="OperationInFaultPhase"/>
<phase name="RMPhase"/>
</phaseOrder>
<phaseOrder type="Outfaultflow">
<!-- user can add his own phases to this area -->
<phase name="RMPhase"/>
<phase name="soapmonitorPhase"/>
<phase name="OperationOutFaultPhase"/>
<phase name="PolicyDetermination"/>
<phase name="MessageOut"/>
</phaseOrder>
</axisconfig>
Am I missing anything?
Thanks
Sunil
-----Original Message-----
From: David Illsley [mailto:[EMAIL PROTECTED]
Sent: Thursday, December 07, 2006 2:52 PM
To: [email protected]
Subject: Re: WS Addressing - Not able to Get MessageID in Response.
Hi,
Yes, you should get ws-addressing (including a messageid) in the
response. My best guess is that the addressing modules isn't engaged
on the server (though it obviously is in the client).
David
On 07/12/06, Sunil Choudhari -X (suchaudh - Satyam at Cisco)
<[EMAIL PROTECTED]> wrote:
>
>
>
> Hi,
>
> Find below my request:
>
> <?xml version='1.0' encoding='utf-8'?>
>
> <soapenv:Envelope
> xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/";
> xmlns:wsa="http://www.w3.org/2005/08/addressing";>
>
> <soapenv:Header>
>
>
> <wsa:To>http://127.0.0.1:8080/Axis2/services/fromws</wsa:To>
>
> <wsa:ReplyTo>
>
>
>
<wsa:Address>http://www.w3.org/2005/08/addressing/anonymous</wsa:Address
>
>
> </wsa:ReplyTo>
>
>
>
<wsa:MessageID>urn:uuid:154D4ED7795855F43111655301223211</wsa:MessageID>
>
> <wsa:Action>echoString</wsa:Action>
>
> </soapenv:Header>
>
> <soapenv:Body>
>
> <ns1:echoString xmlns:ns1="http://sunilfromws.org/";>
>
> <ns1:Text>echo1</ns1:Text>
>
> <ns1:Sequence>sequence1</ns1:Sequence>
>
> </ns1:echoString>
>
> </soapenv:Body>
>
> </soapenv:Envelope>
>
> I am getting following response:
>
> <?xml version='1.0' encoding='utf-8'?>
>
> <soapenv:Envelope
> xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/";>
>
> <soapenv:Header />
>
> <soapenv:Body>
>
> <ns1:echoStringResponse xmlns:ns1="http://sunilfromws.org/";
> xmlns:tns="http://ws.apache.org/axis2";>
>
>
> <ns1:EchoStringReturn>echo1---sequence1</ns1:EchoStringReturn>
>
> </ns1:echoStringResponse>
>
> </soapenv:Body>
>
> </soapenv:Envelope>
>
> WS Addressing is engaged and I was expectring MessageID in response.
>
> Could any one help me to confirm my assumption? And if it is true ,
please
> let me know why I am not receiving same.
>
> I am using Axis 2.0 Version 1.0
>
>
> Thanks,
>
>
>
> Sunil
>
>
--
David Illsley - IBM Web Services Development
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
