Hi Ajith,
Thanks for the comments. Look forward to your explanation. Like to know
the difference between the workaround and the expected.
Thanks,
-Bo
On 6/13/07, Ajith Ranabahu <[EMAIL PROTECTED]> wrote:
>
> Hi,
> We will definitely look at the possibility of supporting this during
> the hackathon. I will perhaps explain in a separate mail what is the
> thinking behind starting from the port but it seems that we need to
> rethink this when it comes to skeletons.
>
> What I can suggest as a workaround is to generate code for each port
> with separate WSDL2Java calls (which will yield multiple skeletons).
> You can make this easy if you use the ant task
>
> Ajith
>
> On 6/13/07, Bo Xie <[EMAIL PROTECTED]> wrote:
> > Hi Amila and all,
> >
> > In case this is not working yet, can you suggest any alternative? I
> have a
> > few services that shared a lot of common data among them. I have to
> move all
> > the methods in all services into one mega service and change method
> name if
> > necessary to avoid conflicts. Mixing methods of different purpose into
> one
> > service looks messy.
> >
> > Appreciate any advice.
> >
> > -Bo
> >
> >
> > On 5/24/07, Jess Fisher <[EMAIL PROTECTED]> wrote:
> > > I still cannot get all the portTypes generated even with Axis 1.2.
> Any
> > plans on fixing this ?
> > >
> > >
> > > Bo Xie < [EMAIL PROTECTED]> wrote:
> > > Sorry to bother you again. Just want to know if this is a bug or I
> did not
> > set the parameter correctly. Any advice on how to make this work.
> > >
> > > Thanks,
> > > -Bo
> > >
> > >
> > > On 5/20/07, Bo Xie < [EMAIL PROTECTED]> wrote:
> > > > I attached the wsdls from the original email.
> > > >
> > > > Thanks,
> > > > -Bo
> > > >
> > > >
> > > >
> > > > On 5/20/07, Amila Suriarachchi < [EMAIL PROTECTED] >
> wrote:
> > > > > Can you send your wsdl? do you have ports for each bining?
> > > > > Actually code is generated per port.
> > > > >
> > > > >
> > > > >
> > > > > On 5/20/07, Bo Xie < [EMAIL PROTECTED]> wrote:
> > > > > > Hi,
> > > > > >
> > > > > > Just wondering if this is still an issue in Axis2 1.2 or I
> did not
> > put the parameters properly.
> > > > > >
> > > > > > Thanks,
> > > > > > -Bo
> > > > > >
> > > > > > On 5/17/07, Bo Xie < [EMAIL PROTECTED]> wrote:
> > > > > > > Thanks, Amila. I tried your advice using no -pn and -sn. It
> still
> > only generated last one binding out of the 4. I used asix2 1.2release.
> > > > > > >
> > > > > > > Here is the command line. Anything I did not do right?
> Attached is
> > the output files and wsdl files. Sorry for the 500k size.
> > > > > > >
> > > > > > > C:\programs\work>wsdl2java -o output -p com.xyz.nbi -t -ss
> -sd -g
> > -S src -R src -uri wsrp_service.wsdl
> > > > > > > Using AXIS2_HOME: C:\programs\axis2- 1.2
> > > > > > > Using JAVA_HOME: C:\programs\jdk1.5.0_09
> > > > > > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> > 'file:/C:/programs/work/'.
> > > > > > > Retrieving document at 'wsrp_v1_interfaces.wsdl', relative
> to
> > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > > > > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > > > > > Retrieving schema at ' http://www.w3.org/2001/xml.xsd',
> relative
> > to 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > > > > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative to
> > 'file:/C:/programs/work/'.
> > > > > > > Retrieving document at 'wsrp_v1_interfaces.wsdl', relative
> to
> > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > > > > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > > > > > Retrieving schema at ' http://www.w3.org/2001/xml.xsd',
> relative
> > to 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > > > > > May 17, 2007 11:55:31 AM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > INFO: The
> > output\src\com\xyz\nbi\InvalidHandleException.java file
> > cannot be overwritten.
> > > > > > > May 17, 2007 11:55:31 AM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > INFO: The
> > output\src\com\xyz\nbi\AccessDeniedException.java file
> > cannot be overwritten.
> > > > > > > May 17, 2007 11:55:31 AM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > INFO: The
> > output\src\com\xyz\nbi\InvalidRegistrationException.java
> > file cannot be overwritten.
> > > > > > > May 17, 2007 11:55:31 AM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > INFO: The
> > output\src\com\xyz\nbi\MissingParametersException.java file
> > cannot be overwritten.
> > > > > > > May 17, 2007 11:55:31 AM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > INFO: The
> > output\src\com\xyz\nbi\InvalidUserCategoryException.java
> > file cannot be overwritten.
> > > > > > > May 17, 2007 11:55:31 AM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > INFO: The
> > output\src\com\xyz\nbi\OperationFailedException.java file
> > cannot be overwritten.
> > > > > > > May 17, 2007 11:55:31 AM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > INFO: The
> > output\src\com\xyz\nbi\InconsistentParametersException.java
> > file cannot be overwritten.
> > > > > > >
> > > > > > > Thanks,
> > > > > > > -Bo
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > On 5/17/07, Amila Suriarachchi < [EMAIL PROTECTED]
> >
> > wrote:
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > On 5/17/07, Bo Xie <[EMAIL PROTECTED] > wrote:
> > > > > > > > > Hi
> > > > > > > > >
> > > > > > > > > I tried on Axis2 1.2 release package. I see there is an
> -pn
> > operation. Here is the command line I used. The skeleton file still
> only
> > have the operations in the last port(see attached skeleton file).
> > > > > > > > >
> > > > > > > > > My questions are:
> > > > > > > > > 1. Is "-pn WSRPRegistrationService" used correctly,
> why the
> > skeleton file does not have the operations from this portType.
> > > > > > > >
> > > > > > > >
> > > > > > > > pn is for port name not for port type.
> > > > > > > >
> > > > > > > >
> > > > > > > > > 2. Is there any options to have wsdl2java generate all
> the
> > portTypes in the WSDL.
> > > > > > > > >
> > > > > > > > > C:\programs\work>wsdl2java -o output -p
> com.cisco.csm.nbi -t
> > -ss -sd -g -S src -R src -pn WSRPRegistrationService -uri
> wsrp_service.wsdl
> > > > > > > >
> > > > > > > >
> > > > > > > > if you do not use the -pn and -sn parameters it will
> generate
> > the code for all bindings.
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > > Using AXIS2_HOME: C:\programs\axis2- 1.2
> > > > > > > > > Using JAVA_HOME: C:\programs\jdk1.5.0_09
> > > > > > > > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative
> to
> > 'file:/C:/programs/work/'.
> > > > > > > > > Retrieving document at 'wsrp_v1_interfaces.wsdl',
> relative to
> > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > > > > > > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > > > > > > > Retrieving schema at ' http://www.w3.org/2001/xml.xsd ',
> > relative to 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > > > > > > > Retrieving document at 'wsrp_v1_bindings.wsdl', relative
> to
> > 'file:/C:/programs/work/'.
> > > > > > > > > Retrieving document at 'wsrp_v1_interfaces.wsdl',
> relative to
> > 'file:/C:/programs/work/wsrp_v1_bindings.wsdl'.
> > > > > > > > > Retrieving schema at 'wsrp_v1_types.xsd', relative to
> > 'file:/C:/programs/work/wsrp_v1_interfaces.wsdl'.
> > > > > > > > > Retrieving schema at ' http://www.w3.org/2001/xml.xsd ',
> > relative to 'file:/C:/programs/work/wsrp_v1_types.xsd'.
> > > > > > > > > May 16, 2007 6:05:12 PM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > > > INFO: The
> > output\src\com\cisco\csm\nbi\InvalidHandleException.java
> > file cannot be overwritten.
> > > > > > > > > May 16, 2007 6:05:12 PM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > > > INFO: The
> > output\src\com\cisco\csm\nbi\AccessDeniedException.java
> > file cannot be overwritten.
> > > > > > > > > May 16, 2007 6:05:12 PM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > > > INFO: The
> > output\src\com\cisco\csm\nbi\InvalidRegistrationException.java
> > file cannot be overwritten.
> > > > > > > > > May 16, 2007 6:05:12 PM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > > > INFO: The
> > output\src\com\cisco\csm\nbi\MissingParametersException.java
> > file cannot be overwritten.
> > > > > > > > > May 16, 2007 6:05:12 PM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > > > INFO: The
> > output\src\com\cisco\csm\nbi\InvalidUserCategoryException.java
> > file cannot be overwritten.
> > > > > > > > > May 16, 2007 6:05:12 PM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > > > INFO: The
> > output\src\com\cisco\csm\nbi\OperationFailedException.java
> > file cannot be overwritten.
> > > > > > > > > May 16, 2007 6:05:12 PM
> > org.apache.axis2.wsdl.codegen.writer.ClassWriter
> > createOutFile
> > > > > > > > > INFO: The
> > output\src\com\cisco\csm\nbi\InconsistentParametersException.java
> > file cannot be overwritten.
> > > > > > > > >
> > > > > > > > > Thanks,
> > > > > > > > > -Bo
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On 3/14/07, Amila Suriarachchi <
> [EMAIL PROTECTED]>
> > wrote:
> > > > > > > > > > I recently added multi services support to axis2. can
> you
> > have a look with a nighly build?
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > On 3/7/07, Amila Suriarachchi <
> [EMAIL PROTECTED]>
> > wrote:
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On 3/7/07, Jess Fisher < [EMAIL PROTECTED]> wrote:
> > > > > > > > > > > >
> > > > > > > > > > > > I'm trying to understand what's happening here, so
> bear
> > with me...
> > > > > > > > > > > > Using Axis 1.4, I run the WSDL2Java like this:
> > > > > > > > > > > > java org.apache.axis.wsdl.WSDL2Java -s -o
> > C:\temp\generated_source C:\temp\wsrp_service.wsdl
> > > > > > > > > > > >
> > > > > > > > > > > > This created all the java interfaces for the
> defined
> > wsdl:portType. See attached java_interfaces.zip
> > > > > > > > > > > >
> > > > > > > > > > > > This also automatically generated all the binding
> > classes for the <wsdl:binding> defined in wsrp_v1_bindings.wsdl (see
> my
> > previous post where I attached this file there)
> > > > > > > > > > > > These were all defined in wsrp_v1_bindings.wsdl:
> > > > > > > > > > > > <wsdl:binding
> > name="WSRP_v1_Markup_Binding_SOAP"
> > type="intf:WSRP_v1_Markup_PortType">
> > > > > > > > > > > > <wsdl:binding
> > name="WSRP_v1_ServiceDescription_Binding_SOAP"
> > type="intf:WSRP_v1_ServiceDescription_PortType">
> > > > > > > > > > > > <wsdl:binding
> > name="WSRP_v1_Registration_Binding_SOAP"
> > type="intf:WSRP_v1_Registration_PortType">
> > > > > > > > > > > > <wsdl:binding
> > name="WSRP_v1_PortletManagement_Binding_SOAP"
> > type="intf:WSRP_v1_PortletManagement_PortType">
> > > > > > > > > > > >
> > > > > > > > > > > > The way I run Axis2's wsdl2java is as follows:
> > > > > > > > > > > > wsdl2java.bat -uri C:\temp\wsrp_service.wsdl -o
> > C:\temp\generated_source -ss -d adb -g -ns2p
> > urn:oasis:names:tc:wsrp:v1:types=oasis.names.tc.wsrp.v1.types
> >
,urn:oasis:names:tc:wsrp:v1:intf=oasis.names.tc.wsrp.v1.intf,urn:oasis:names:tc:wsrp:v1:bind
> > > > > > > > > > > >
> > =oasis.names.tc.wsrp.v1.bind,urn:oasis:names:tc:wsrp:v1:wsdl=
> oasis.names.tc.wsrp.v1.wsdl
> > -ssi
> > > > > > > > > > > >
> > > > > > > > > > > > However when I used Axis2's wsdl2java I did not
> get the
> > java interfaces for <wsdl:portType>. Why does the axis 1.x generate
> the java
> > interfaces but axis 2 doesn't?
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > well Axis2 generates the interface if you have
> specified
> > the -ssi parameter. But the difference is it has the service name
> instead of
> > the porttype name. I am not familiar with the axis 1.x but actually
> this
> > interface method signatures are depends on the binding.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Also, I had to run wsdl2java seperately on
> > wsrp_v1_bindings.wsdl before it would read my <wsdl:binding> defined
> there
> > to create my java classes for my wsdl bindings. Note that
> wsrp_service.wsdl
> > already imports wsrp_v1_bindings.wsdl. It also does not generate the
> java
> > classes for all my wsdl:binding (I guess due to multiple defined
> > wsdl:binding in my wsdl file). I get this message when I run the
> wsdl2java
> > on wsrp_v1_bindings.wsdl:
> > > > > > > > > > > >
> > org.apache.axis2.description.WSDL11ToAxisServiceBuilder
> > findBinding
> > > > > > > > > > > > INFO: A service element was not found - picking a
> random
> > binding!
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > In Axis2 it generates the code for only one binding
> in one
> > service. So if there is no service it creates a random
> service.Actually this
> > is an axis2 limitation.
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > What I did to workaround this is to manually run
> > wsdl2java on each of my wsdl:binding, so I can get the java classes
> for all
> > of my bindings. Axis 1.x wsdl2java automatically generated java
> classes for
> > all my wsdl:binding defined in wsrp_v1_bindings.wsdl.
> > > > > > > > > > > >
> > > > > > > > > > > > Any thoughts?
> > > > > > > > > > > >
> > > > > > > > > > > > Thanks again!
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > Amila Suriarachchi < [EMAIL PROTECTED]>
> wrote:
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > On 3/7/07, Jess Fisher <[EMAIL PROTECTED] > wrote:
> > > > > > > > > > > > >
> > > > > > > > > > > > > From the attached wsdl
> > file:wsrp_v1_interfaces.wsdl, the following are defined:
> > > > > > > > > > > > > <wsdl:portType name="WSRP_v1_Markup_PortType">
> > > > > > > > > > > > > <wsdl:portType
> > name="WSRP_v1_ServiceDescription_PortType">
> > > > > > > > > > > > > <wsdl:portType
> > name="WSRP_v1_Registration_PortType">
> > > > > > > > > > > > > <wsdl:portType
> > name="WSRP_v1_PortletManagement_PortType">
> > > > > > > > > > > > >
> > > > > > > > > > > > > But, when running Axis2's WSDL2Java, the
> corresponding
> > java classes (for the wsdl:portType) are not created.
> > > > > > > > > > > > > Using Axis 1.4's WSDL2Java, the corresposing
> java
> > classes were generated.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > using axis2 you can not generate the code for
> portTypes.
> > The reason for this is the skelton and and stub interfaces depends on
> the
> > binding. Why you need to generate the code for a port type?
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > I run the WSDL2Java against wsrp_service.wsdl
> first
> > which imports wsrp_v1_bindings.wsdl which then imports
> > wsrp_v1_interfaces.wsdl.
> > > > > > > > > > > > >
> > > > > > > > > > > > > Is this a bug?
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > no I believe.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > If yes, does anybody know of the bug ID ? I
> cannot
> > find it in JIRA.
> > > > > > > > > > > > > Or is there a WSDL2Java option I need to set to
> > generate java classes for the portType, specifically?
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > if you do not have specified any parts or
> namespace ( in
> > rpc) in soap:body (in your binding) and generate the code with
> parameters
> > -ss -sd -ssi and with any binding (-d adb, -d jibx, -d xmlbeans, -d
> jaxbri)
> > I think you can get what you need. It simply generates the skelton,
> skelton
> > interface and the service.xml.
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > > > (I've used -ss, -g, -d adb, -ssi)
> > > > > > > > > > > > >
> > > > > > > > > > > > > Thanks.
> > > > > > > > > > > > >
> > > > > > > > > > > > > ________________________________
> > Need Mail bonding?
> > > > > > > > > > > > > Go to the Yahoo! Mail Q&A for great tips from
> Yahoo!
> > Answers users. --0-1424838073-1173226094=:65510--
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > ---------------------------------------------------------------------
> > > > > > > > > > > > > To unsubscribe, e-mail:
> > [EMAIL PROTECTED]
> > > > > > > > > > > > > For additional commands, e-mail:
> > [EMAIL PROTECTED]
> > > > > > > > > > > > >
> > > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > > > --
> > > > > > > > > > > > Amila Suriarachchi,
> > > > > > > > > > > > WSO2 Inc.
> > > > > > > > > > > >
> > > > > > > > > > > > ________________________________
> > It's here! Your new message!
> > > > > > > > > > > > Get new email alerts with the free Yahoo! Toolbar.
>
> > --0-1402565997-1173253433=:40062--
> > > > > > > > > > > >
> > > > > > > > > > > >
> > ---------------------------------------------------------------------
> > > > > > > > > > > > To unsubscribe, e-mail:
> > [EMAIL PROTECTED]
> > > > > > > > > > > > For additional commands, e-mail:
> > [EMAIL PROTECTED]
> > > > > > > > > > > >
> > > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > Amila Suriarachchi,
> > > > > > > > > > > WSO2 Inc.
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > Amila Suriarachchi,
> > > > > > > > > > WSO2 Inc.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > ---------------------------------------------------------------------
> > > > > > > > > To unsubscribe, e-mail:
> > [EMAIL PROTECTED]
> > > > > > > > > For additional commands, e-mail:
> [EMAIL PROTECTED]
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > Amila Suriarachchi,
> > > > > > > > WSO2 Inc.
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > Amila Suriarachchi,
> > > > > WSO2 Inc.
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > >
> > > ________________________________
> > Be a better Globetrotter. Get better travel answers from someone who
> knows.
> > > Yahoo! Answers - Check it out.
> > >
> > >
> >
> >
>
>
> --
> Ajith Ranabahu
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
>
