Hi Guido,
your service running on production server isn't able to connect to a
local service? Maybe the ports are not open for connection from
production area to your local network? I know, it's the same network,
you said. Is it really?
Are you able to reach ip:port of A from C manually?
Thanks.
Markus
Barbaglia, Guido (ESTG) schrieb:
Each node has send/receive capabilities, so the service is running on every
node. But I have the "did not accept connection" error even with a simple
ping service. I've checked the network configuration and everything seems ok,
moreover all the 'nodes' belong to the same network, the only difference with
node C is that it can be accessed by external browsers.
If I try a ping or resources exchange between A and B (my development
laptops) everything works fine, when I try the same between A/B and C (which
has its own installation with the same software) things fail...
I've tried to increase the timeout but the problem is the same.
What can I try?
Best regards
Guido Barbaglia
-----Original Message-----
From: Michele Mazzucco [mailto:[EMAIL PROTECTED]
Sent: Fri 10/24/2008 12:55 PM
To: [email protected]
Cc:
Subject: Re: [Axis2] - Production problem
Guido,
On 24 Oct 2008, at 11:08, Barbaglia, Guido (ESTG) wrote:
I've tested my Axis2 application on two machines (let's say A and B)
belonging to the same local network, and everything works very
well. Then I
installed it on a production server C (with pubblic access and
belonging to
the same network) and I tried to test the communication between A
and C, but
I had connection timeout problem. It seems that node A did not
accept the
connection within timeout of xyz ms from the node C.
isn't your service running on node C? If so, why did you state "it
seems that node A did not accept the connection..."?
BTW, could it be a firewall/proxy/network configuration issue?
Michele
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
