> If a client sends you a request in UTF-16, you ought to send the response > back in UTF-16. but is the same with the xml schema?
If somebody sends a request with XML schema 1999 then axis should answer with 1999 or will answer with 2000 or 2001 ??? dovle > > > -----Original Message----- > > From: Yates, Danny (ANTS) [mailto:[EMAIL PROTECTED]] > > Sent: Wednesday, November 20, 2002 10:11 AM > > To: '[EMAIL PROTECTED]' > > Subject: RE: UTF-16 with Axis > > > > Anne wrote: > > > R1012 MESSAGEs MAY be serialized as either UTF-8 or UTF-16. > > > > > > In order to be conformant to the WS-I Basic Profile, a SOAP service > > > (and > > > > the > > > > > SOAP implementation it uses) must support both UTF-8 and > > > > UTF-16. From the > > > > > profile: > > > > Ummm... not quite. Surely this means that a serialiser has to support > > one or other (or both) of UTF-8 and UTF-16, but it cannot support > > neither. If this is the case, all de-serialisers (i.e. XML parsers) > > MUST be able to support either since they can never be sure which > > they will receive. This is no different from the XML spec which states > > that parsers must be able to understand both UTF-8 and UTF-16. So we > > are no further forward. > > > > > service must be able to consume them all (e.g., while a > > > sender may choose whether to encode XML in UTF-8 or UTF-16 > > > when sending a message, a receiver must be capable of using > > > either). > > > > Err... yeah! That's what I said! :-) > > > > So (other than the efficiency issues you touched upon regarding > > Chinese/Japanese characters), there is no reason to prefer one type > > of output over another, as far as I can make out. > > > > We still need to know what the original poster was trying to achieve. > > > > Dan. > > > > -- > > Danny Yates > > Technical Architect > > Abbey National Treasury Services > > E-mail: [EMAIL PROTECTED] > > Phone: +44 20 7756 5012 > > Fax: +44 20 7612 4342 > > > > > > -----Original Message----- > > From: Anne Thomas Manes [mailto:[EMAIL PROTECTED]] > > Sent: 20 November 2002 13:55 > > To: [EMAIL PROTECTED] > > Subject: RE: UTF-16 with Axis > > > > > > Chinese and Japanese character sets are much more efficient in UTF-16 > > than in UTF-8. So I can certainly understand why someone might want to > > use one over the other. > > > > Also, the WS-I Basic Profile [1] stipulates: > > > > R1012 MESSAGEs MAY be serialized as either UTF-8 or UTF-16. > > > > In order to be conformant to the WS-I Basic Profile, a SOAP > > service (and the > > SOAP implementation it uses) must support both UTF-8 and UTF-16. From the > > profile: > > > > A deployed instance of a Web service (as specified by > > wsdl:port) is considered conformant if it produces only > > conformant artifacts, and is capable of consuming conformant > > artifacts, as appropriate. Note that this means that where > > multiple conformant artifacts are possible, a conformant > > service must be able to consume them all (e.g., while a > > sender may choose whether to encode XML in UTF-8 or UTF-16 > > when sending a message, a receiver must be capable of using > > either). > > > > [1] http://www.ws-i.org/Profiles/Basic/2002-10/BasicProfile-1.0-WGD.htm > > > > Anne > > > > > -----Original Message----- > > > From: Yates, Danny (ANTS) [mailto:[EMAIL PROTECTED]] > > > Sent: Wednesday, November 20, 2002 3:52 AM > > > To: '[EMAIL PROTECTED]' > > > Subject: RE: UTF-16 with Axis > > > > > > > > > Hi, > > > > > > SOAP messages are XML, and XML parsers are required (by the XML spec) > > > to accept UTF-8 and UTF-16 encoding. Both encodings can represent > > > exactly the same character set (Unicode). So, if AXIS is generating > > > UTF-8, the recipient should have no difficulty parsing it (assuming > > > it uses a conformant XML parser to do so), and you shouldn't be in > > > a situation where you have to use UTF-16 because you can't represent > > > certain characters in UTF-8. > > > > > > Perhaps you could be a bit more specific about why you require this? > > > > > > Regards, > > > > > > Dan. > > > > > > -- > > > Danny Yates > > > Technical Architect > > > Abbey National Treasury Services > > > E-mail: [EMAIL PROTECTED] > > > Phone: +44 20 7756 5012 > > > Fax: +44 20 7612 4342 > > > > > > > > > -----Original Message----- > > > From: Meng Cai [mailto:[EMAIL PROTECTED]] > > > Sent: 19 November 2002 19:26 > > > To: [EMAIL PROTECTED] > > > Subject: UTF-16 with Axis > > > > > > > > > Greeting, > > > > > > Does anyone know if Axis supports UTF-16? If so, how can I > > > send a SOAP message with UTF-16 encoding? > > > > > > Thanks a lot, > > > > > > MC > > > > ****************************************************************** > > ********* > > This communication (including any attachments) contains > > confidential information. If you are not the intended recipient > > and you have received this communication in error, you should > > destroy it without copying, disclosing or otherwise using its > > contents. Please notify the sender immediately of the error. > > > > Internet communications are not necessarily secure and may be > > intercepted or changed after they are sent. Abbey National > > Treasury Services plc does not accept liability for any loss you > > may suffer as a result of interception or any liability for such > > changes. If you wish to confirm the origin or content of this > > communication, please contact the sender by using an alternative > > means of communication. > > > > This communication does not create or modify any contract and, > > unless otherwise stated, is not intended to be contractually binding. > > > > Abbey National Treasury Services plc. Registered Office: Abbey > > National House, 2 Triton Square, Regents Place, London NW1 3AN. > > Registered in England under Company Registration Number: 2338548. > > Regulated by the Financial Services Authority (FSA). > > ****************************************************************** > > *********
