Hey!!! You can compile Axis using JDK1.5...all you need to do is drop xercesImpl-2_6_2.jar xmlParserAPIs-2_6_2.jar
into the ws-axis/java/lib/endorsed directory. -- dim On Mon, 13 Dec 2004 11:25:48 -0700, ANDREW MICONE <[EMAIL PROTECTED]> wrote: > Well, you can't compile Axis itself under JDK1.5, it doesn't work. Since the > Axis engine doesn't appear to take advantage of any 1.5 features, it doesn't > buy you anything either. You can compile the nightly with 1.42 and then run > it under JDK 1.5 (with Tomcat 5.5.x). That's one of my test environments and > it works fine. That way, if you need JDK 1.5 features you can use them in > your Axis clients. You need Axis 1.2RC2 to actually write services, however. > Personally, the only advantage I've gotten out of JDK1.5 is the improved > error messages at compile time and the improved stack trace printing. -- Andy > > >>> [EMAIL PROTECTED] 12/13/04 11:17AM >>> > I think people are missing his point. He's trying to build Axis from the > source and it won't build under JDK 1.5 because of the differences. Isn't > there some commandline parameter to compile using 1.4 compatibility. But > that would lose any benefits that 1.5 gives. > > I guess there should be a branch of the apache projects for 1.5 vs 1.4 jdk. > In all honesty, 1.5 deserves to be called 2.0 it's that different! > > -----Original Message----- > From: Bouche Paul [mailto:[EMAIL PROTECTED] > Sent: Monday, December 13, 2004 6:50 AM > To: [EMAIL PROTECTED] > Subject: RE: Axis and Java 1.5 > > Hi, > > > Upon further review, I discovered that the org.w3c.com.Node interface > > has the new method "getUserData(String key)" in Java 1.5. I'm sure > > this is the reason for all the errors - interfaces not fully > > implemented. > I also got these errors when trying to build axis with Java 1.5. Yet this is > not needed. > The code that wsdl2java from Axis 1.2rc2 generates is compatible with Java > 1.5. > So what you need to do is run the following with axis.jar in classpath > > java org.apache.axis.wsdl.WSDL2Java <wsdl.uri> <any other options> > > this will generate you all the needed classes to run axis as client against > the service specified in the wsdl. > This is what is meant by rebuilding or regenerating the files. You need to > run wsdl2java with the wsdl again. > Also if you are using ant you need to run the axis wsdl2java ant task > appropriately (I don't know much about this since I don't use ant). > > > > There are 16 of these errors so I suppose I could go through each one > > and add the missing methods. > > > > Now I am really wondering how it is that others have been able to > > compile under 1.5? > You should not have to rebuild axis under 1.5. Since has you can see that is > a lot of work and some things in deeper underlying structures have changed > to get it compiling again. > > Concering tomcat, at least in a windows environment, it somehow if you > install java 1.5 after you installed tomcat under java 1.4 still gets a java > 1.4 jvm even though you have installed java 1.5. So what I did was install a > clean tomcat merge this with the old one and then I added the new axis > 1.2rc2 web app into tomcat. All works now. > > -- Paul > > > > > --- footh <[EMAIL PROTECTED]> wrote: > > > > > Thanks everyone for you help. > > > > > > Here's an update: I confess I don't quite understand what > > > "re-generating java files from the WSDL" means. > see above. > > > > > > I'm guessing that means turning the axis services back into java > > > source? All I am trying to do is just use the ant file in the Axis > > > install home and type "ant compile". > > > > > > So, I took Davanum's suggestion of changing all the references. The > > > problem is, the classes in the "constants" package are pretty much > > > empty. So, after doing a global find/replace, I just deleted the > > > constants directory and renamed the enum directory to constants. > > > (On a quick side note, there is also a file in the "tools" source > > > that needs the reference change). This again didn't build under 1.5 > > > but I got different errors. > > > > > > To make sure the changes I made were OK, I attempted a build under > > > 1.4.2 and it worked fine. Here is an example an error I'm getting > > > under 1.5 (they are all > > > similar): > > > > > > [javac] > > > > > C:\axis\src\org\apache\axis\message\NodeImpl.java:45: > > > org.apache.axis.message.NodeImpl is not abstract and does not > > > override abstract method > > > getUserData(java.lang.String) in org.w3c.dom.Node [javac] public > > > class NodeImpl implements org.w3c.dom.Node, javax.xml.soap.Node, > > > [javac] ^ > > > > > > This looks to me that the wrong base class > > > (org.w3c.dom.Node) is being used in the inheritance chain. Anyway, > > > I am going to keep plugging away at it, but any advice would be > > > appreciated. > > > > > > I know I should probably just go back to 1.4.2, but now it is > > > becoming a pride thing. After spending all this time, I must figure > > > this out!!! > > > > > > -JF > > > > > > --- Davanum Srinivas <[EMAIL PROTECTED]> wrote: > > > > > > > or replace all references of > > > org.apache.axis.enum.* > > > > to > > > > org.apache.axis.constants.* > > > > > > > > -- dims > > > > > > > > > > > > On Fri, 10 Dec 2004 12:34:57 -0700, ANDREW MICONE > > > > <[EMAIL PROTECTED]> wrote: > > > > > Re-gen your java classes from the WSDL (making > > > > sure to move your BindingImpl out of the tree so that can be > > > > regenerated as well). I got this to work. You might want to > > > > consider just tooling back to JDK 1.42. That's what I did after I > > > > figured out that all JDK 1.5 was buying me was a little better > > > > error message processing on compile. Most > > > everything > > > > else I use could be added to the 1.4 environment > > > by > > > > adding the right jars to the CLASSPATH. -- Andy > > > > > > > > > > >>> [EMAIL PROTECTED] 12/10/04 12:06PM >>> > > > > > > > > > > > > > > > Thanks for the reply. > > > > > > > > > > After I posted my message yesterday, I did go > > > > ahead > > > > > and attempt to build Axis using RC2. However, > > > the > > > > > compiler output still spits out all the "enum" > > > > errors. > > > > > If I switch the JAVA_HOME environment variable > > > to > > > > the > > > > > 1.4.2 home, Axis builds fine. > > > > > > > > > > Is there some simple step I'm missing to get RC2 > > > > to > > > > > build with 1.5? I've been through a long thread > > > > on > > > > > this topic from a month ago but I can't find > > > > anything > > > > > to help. > > > > > > > > > > The only reason I find myself needing 1.5 is > > > > because I > > > > > built a whole server environment and website a > > > > month > > > > > ago using 1.5 (figured it was the latest and > > > > greatest, > > > > > so why not?). Only now do I find myself needing > > > > Axis > > > > > and I'd prefer not to switch my environment over > > > > to > > > > > 1.4 unless there's no other way. > > > > > > > > > > Regards, > > > > > > > > > > JF > > > > > > > > > > --- ANDREW MICONE <[EMAIL PROTECTED]> wrote: > > > > > > > > > > > Actually, you just need the latest 1.2RC2 (the version that > > > > > > changed enums to constants) to > > > get > > > > it > > > > > > to work under J2SE1.5. It is still compiled > > > > under > > > > > > 1.42. It sounds like you are having problems > > > > with > > > > > > errors generated by WSDL2Java. > > > > > > > > > > > > By the way, unless you are using J2SE1.5 > > > > features, > > > > > > you don't gain much in going to 1.5 over just > > > > runing > > > > > > tomcat with the compability package installed > > > in > > > > > > 1.42 (assuming that's your environment). -- > > > Andy > > > > > > > > > > > > >>> [EMAIL PROTECTED] 12/09/04 03:12PM >>> > > > > > > When using Axis with java 1.5 installed I get > > > > all > > > > > > these Unsupported major.minor version errors. > > > > When > > > > > > I > > > > > > switch to any version of 1.4 I have no > > > problems. > > > > > > > > > > > > So, I am guessing that I must recompile the > > > Axis > > > > > > source under 1.5 for it to work properly? > > > I've > > > > read > > > > > > other messages of people who have successfully gotten Axis to > > > > > > work under 1.5 (lots of messages on > > > the > > > > > > "enum" > > > > > > bug). I know this solution seems obvious but > > > I > > > > just > > > > > > want to make sure it will work. > > > > > > > > > > > > Thanks, > > > > > > > > > > > > JF > > > > > > > > > > > > > > > > __________________________________________________ > > > > > > Do You Yahoo!? > > > > > > Tired of spam? Yahoo! Mail has the best spam protection > > > > > > around http://mail.yahoo.com > > > > > > > > > > > > > > > > > > > > > > __________________________________ > > > > > Do you Yahoo!? > > > > > Meet the all-new My Yahoo! - Try it today! > > > > > http://my.yahoo.com > > > > > > > > > > > > > > > > > > > > > > -- > > > > Davanum Srinivas - > > > > http://webservices.apache.org/~dims/ > > > > > > > > > > > > > > > > > > > __________________________________ > > > Do you Yahoo!? > > > Take Yahoo! Mail with you! Get it on your mobile phone. > > > http://mobile.yahoo.com/maildemo > > > > > > > > > __________________________________________________ > > Do You Yahoo!? > > Tired of spam? Yahoo! Mail has the best spam protection around > > http://mail.yahoo.com > > > -- Davanum Srinivas - http://webservices.apache.org/~dims/
