Hello,
you are really great. Can't thank you enough for helping me with this
problem.
If I understand it right batman_adv is loaded right after installing the
image:
r...@openwrt:/# lsmod
Module Size Used by Not tainted
batman_adv 51104 0
nf_nat_tftp 432 0
nf_conntrack_tftp 2400 1 nf_nat_tftp
nf_nat_irc 864 0
nf_conntrack_irc 2592 1 nf_nat_irc
nf_nat_ftp 1360 0
nf_conntrack_ftp 4896 1 nf_nat_ftp
ipt_MASQUERADE 992 1
iptable_nat 2304 1
nf_nat 11824 5
nf_nat_tftp,nf_nat_irc,nf_nat_ftp,ipt_MASQUERADE,iptable_nat
xt_NOTRACK 672 0
iptable_raw 656 1
xt_state 800 3
nf_conntrack_ipv4 7808 6 iptable_nat,nf_nat
nf_defrag_ipv4 608 1 nf_conntrack_ipv4
nf_conntrack 42560 12
nf_nat_tftp,nf_conntrack_tftp,nf_nat_irc,nf_conntrack_irc,nf_nat_ftp,nf_conntrack_ftp,ipt_MASQUERADE,iptable_nat,nf_nat,xt_NOTRACK,xt_state,nf_conntrack_ipv4
pppoe 10208 0
pppox 1312 1 pppoe
ipt_REJECT 1984 2
xt_TCPMSS 1952 1
ipt_LOG 4640 0
xt_comment 464 0
xt_multiport 1904 0
xt_mac 576 0
xt_limit 1152 1
iptable_mangle 992 0
iptable_filter 768 1
ip_tables 8864 4
iptable_nat,iptable_raw,iptable_mangle,iptable_filter
xt_tcpudp 1856 4
x_tables 9840 13
ipt_MASQUERADE,iptable_nat,xt_NOTRACK,xt_state,ipt_REJECT,xt_TCPMSS,ipt_LOG,xt_comment,xt_multiport,xt_mac,xt_limit,ip_tables,xt_tcpudp
ppp_async 9040 0
ppp_generic 21200 3 pppoe,pppox,ppp_async
slhc 5360 1 ppp_generic
b43legacy 97328 0
b43 153392 0
mac80211 210464 2 b43legacy,b43
crc_ccitt 976 1 ppp_async
cfg80211 128144 3 b43legacy,b43,mac80211
compat_firmware_class 5520 2 b43legacy,b43
compat 752 0
arc4 816 2
aes_generic 31056 0
deflate 1328 0
ecb 1328 2
cbc 2016 0
switch_robo 4048 0
switch_core 5200 1 switch_robo
diag 7504 0"
This is the batman-adv config file, also directly after installing the
image:
"config 'mesh' 'bat0'
option 'interfaces' 'wlan0'
option 'orig_interval'
option 'log_level'
option 'aggregate_ogm'
option 'vis_mode'"
Here is my logread output (batman-adv:B.A.T.M.A.N. advanced 2010.0.0
(compatibility version 8) loaded):
"r...@openwrt:/# logread
Jan 1 00:00:16 OpenWrt syslog.info syslogd started: BusyBox v1.15.3
Jan 1 00:00:16 OpenWrt user.notice kernel: klogd started: BusyBox
v1.15.3 (2010-08-10 01:43:28 CEST)
Jan 1 00:00:16 OpenWrt user.notice kernel: Linux version 2.6.32.16
(jonat...@winme-mesh1) (gcc version 4.3.3 (GCC) ) #1 Tue Aug 10 02:14:13
CEST 2010
Jan 1 00:00:16 OpenWrt user.info kernel: CPU revision is: 00029008
(Broadcom BCM3302)
Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 0 found: ChipCommon
(cc 0x800, rev 0x0E, vendor 0x4243)
Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 1 found: Fast
Ethernet (cc 0x806, rev 0x09, vendor 0x4243)
Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 2 found: MIPS 3302
(cc 0x816, rev 0x06, vendor 0x4243)
Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 3 found: USB 1.1
Host (cc 0x817, rev 0x02, vendor 0x4243)
Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 4 found: MEMC SDRAM
(cc 0x80F, rev 0x01, vendor 0x4243)
Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 5 found: IEEE
802.11 (cc 0x812, rev 0x09, vendor 0x4243)
Jan 1 00:00:16 OpenWrt user.debug kernel: ssb: Core 6 found: Roboswitch
(cc 0x81C, rev 0x02, vendor 0x4243)
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: Initializing MIPS core...
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: set_irq: core 0x0806, irq
4 => 4
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: set_irq: core 0x0816, irq
5 => 2
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: set_irq: core 0x0812, irq
2 => 5
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: after irq reconfiguration
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0800, irq : 2(S)
3* 4 5 6 D I
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0806, irq : 2(S)
3 4* 5 6 D I
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0816, irq : 2(S)*
3 4 5 6 D I
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0817, irq : 2(S)
3 4 5 6* D I
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x080f, irq : 2(S)
3 4 5 6 D I*
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x0812, irq : 2(S)
3 4 5* 6 D I
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: core 0x081c, irq : 2(S)
3 4 5 6 D I*
Jan 1 00:00:16 OpenWrt user.info kernel: ssb: Sonics Silicon Backplane
found at address 0x18000000
Jan 1 00:00:16 OpenWrt user.warn kernel: Serial init done.
Jan 1 00:00:16 OpenWrt user.info kernel: Determined physical RAM map:
Jan 1 00:00:16 OpenWrt user.info kernel: memory: 01000000 @ 00000000
(usable)
Jan 1 00:00:16 OpenWrt user.info kernel: Initrd not found or empty -
disabling initrd
Jan 1 00:00:16 OpenWrt user.warn kernel: Zone PFN ranges:
Jan 1 00:00:16 OpenWrt user.warn kernel: Normal 0x00000000 ->
0x00001000
Jan 1 00:00:16 OpenWrt user.warn kernel: Movable zone start PFN for
each node
Jan 1 00:00:16 OpenWrt user.warn kernel: early_node_map[1] active PFN
ranges
Jan 1 00:00:16 OpenWrt user.warn kernel: 0: 0x00000000 -> 0x00001000
Jan 1 00:00:16 OpenWrt user.debug kernel: On node 0 totalpages: 4096
Jan 1 00:00:16 OpenWrt user.debug kernel: free_area_init_node: node 0,
pgdat 80283b50, node_mem_map 802c9000
Jan 1 00:00:16 OpenWrt user.debug kernel: Normal zone: 32 pages used
for memmap
Jan 1 00:00:16 OpenWrt user.debug kernel: Normal zone: 0 pages reserved
Jan 1 00:00:16 OpenWrt user.debug kernel: Normal zone: 4064 pages,
LIFO batch:0
Jan 1 00:00:16 OpenWrt user.warn kernel: Built 1 zonelists in Zone
order, mobility grouping off. Total pages: 4064
Jan 1 00:00:16 OpenWrt user.notice kernel: Kernel command line:
root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
Jan 1 00:00:16 OpenWrt user.info kernel: PID hash table entries: 64
(order: -4, 256 bytes)
Jan 1 00:00:16 OpenWrt user.info kernel: Dentry cache hash table
entries: 2048 (order: 1, 8192 bytes)
Jan 1 00:00:16 OpenWrt user.info kernel: Inode-cache hash table
entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:16 OpenWrt user.warn kernel: Primary instruction cache
16kB, VIPT, 2-way, linesize 16 bytes.
Jan 1 00:00:16 OpenWrt user.warn kernel: Primary data cache 8kB, 2-way,
VIPT, no aliases, linesize 16 bytes
Jan 1 00:00:16 OpenWrt user.info kernel: Memory: 13372k/16384k
available (2222k kernel code, 3012k reserved, 350k data, 136k init, 0k
highmem)
Jan 1 00:00:16 OpenWrt user.info kernel: Hierarchical RCU implementation.
Jan 1 00:00:16 OpenWrt user.info kernel: NR_IRQS:128
Jan 1 00:00:16 OpenWrt user.info kernel: console [ttyS0] enabled
Jan 1 00:00:16 OpenWrt user.info kernel: Calibrating delay loop...
199.16 BogoMIPS (lpj=398336)
Jan 1 00:00:16 OpenWrt user.warn kernel: Mount-cache hash table
entries: 512
Jan 1 00:00:16 OpenWrt user.info kernel: NET: Registered protocol family 16
Jan 1 00:00:16 OpenWrt user.warn kernel: bio: create slab <bio-0> at 0
Jan 1 00:00:16 OpenWrt user.info kernel: Switching to clocksource MIPS
Jan 1 00:00:16 OpenWrt user.info kernel: NET: Registered protocol family 2
Jan 1 00:00:16 OpenWrt user.info kernel: IP route cache hash table
entries: 1024 (order: 0, 4096 bytes)
Jan 1 00:00:16 OpenWrt user.info kernel: TCP established hash table
entries: 512 (order: 0, 4096 bytes)
Jan 1 00:00:16 OpenWrt user.info kernel: TCP bind hash table entries:
512 (order: -1, 2048 bytes)
Jan 1 00:00:16 OpenWrt user.info kernel: TCP: Hash tables configured
(established 512 bind 512)
Jan 1 00:00:16 OpenWrt user.info kernel: TCP reno registered
Jan 1 00:00:16 OpenWrt user.info kernel: NET: Registered protocol family 1
Jan 1 00:00:16 OpenWrt user.info kernel: squashfs: version 4.0
(2009/01/31) Phillip Lougher
Jan 1 00:00:16 OpenWrt user.warn kernel: Registering mini_fo version $Id$
Jan 1 00:00:16 OpenWrt user.info kernel: JFFS2 version 2.2. (NAND)
(SUMMARY) © 2001-2006 Red Hat, Inc.
Jan 1 00:00:16 OpenWrt user.info kernel: msgmni has been set to 26
Jan 1 00:00:16 OpenWrt user.info kernel: io scheduler noop registered
Jan 1 00:00:16 OpenWrt user.info kernel: io scheduler deadline
registered (default)
Jan 1 00:00:16 OpenWrt user.info kernel: Serial: 8250/16550 driver, 2
ports, IRQ sharing enabled
Jan 1 00:00:16 OpenWrt user.info kernel: serial8250: ttyS0 at MMIO
0xb8000300 (irq = 3) is a 16550A
Jan 1 00:00:16 OpenWrt user.info kernel: serial8250: ttyS1 at MMIO
0xb8000400 (irq = 3) is a 16550A
Jan 1 00:00:16 OpenWrt user.info kernel: serial8250.0: ttyS0 at MMIO
0xb8000300 (irq = 3) is a 16550A
Jan 1 00:00:16 OpenWrt user.info kernel: serial8250.0: ttyS1 at MMIO
0xb8000400 (irq = 3) is a 16550A
Jan 1 00:00:16 OpenWrt user.warn kernel: flash init: 0x1c000000 0x02000000
Jan 1 00:00:16 OpenWrt user.info kernel: Physically mapped flash: Found
1 x16 devices at 0x0 in 16-bit bank
Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash:
Found an alias at 0x400000 for the chip at 0x0
Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash:
Found an alias at 0x800000 for the chip at 0x0
Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash:
Found an alias at 0xc00000 for the chip at 0x0
Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash:
Found an alias at 0x1000000 for the chip at 0x0
Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash:
Found an alias at 0x1400000 for the chip at 0x0
Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash:
Found an alias at 0x1800000 for the chip at 0x0
Jan 1 00:00:16 OpenWrt user.debug kernel: Physically mapped flash:
Found an alias at 0x1c00000 for the chip at 0x0
Jan 1 00:00:16 OpenWrt user.warn kernel: Amd/Fujitsu Extended Query
Table at 0x0040
Jan 1 00:00:16 OpenWrt user.notice kernel: number of CFI chips: 1
Jan 1 00:00:16 OpenWrt user.notice kernel: cfi_cmdset_0002: Disabling
erase-suspend-program due to code brokenness.
Jan 1 00:00:16 OpenWrt user.notice kernel: Flash device: 0x400000 at
0x1fc00000
Jan 1 00:00:16 OpenWrt user.notice kernel: bootloader size: 262144
Jan 1 00:00:16 OpenWrt user.warn kernel: Updating TRX offsets and length:
Jan 1 00:00:16 OpenWrt user.warn kernel: old trx = [0x0000001c,
0x00000974, 0x000d2000], len=0x00271000 crc32=0x65c67278
Jan 1 00:00:16 OpenWrt user.warn kernel: new trx = [0x0000001c,
0x00000974, 0x000d2000], len=0x000d2000 crc32=0x7f60a9cc
Jan 1 00:00:16 OpenWrt user.warn kernel: Done
Jan 1 00:00:16 OpenWrt user.notice kernel: Creating 4 MTD partitions on
"Physically mapped flash":
Jan 1 00:00:16 OpenWrt user.notice kernel:
0x000000000000-0x000000040000 : "cfe"
Jan 1 00:00:16 OpenWrt user.notice kernel:
0x000000040000-0x0000003f0000 : "linux"
Jan 1 00:00:16 OpenWrt user.notice kernel:
0x000000112000-0x0000003f0000 : "rootfs"
Jan 1 00:00:16 OpenWrt user.warn kernel: mtd: partition "rootfs" must
either start or end on erase block boundary or be smaller than an erase
block -- forcing read-only
Jan 1 00:00:16 OpenWrt user.notice kernel: mtd: partition "rootfs" set
to be root filesystem
Jan 1 00:00:16 OpenWrt user.info kernel: mtd: partition "rootfs_data"
created automatically, ofs=290000, len=160000
Jan 1 00:00:16 OpenWrt user.notice kernel:
0x000000290000-0x0000003f0000 : "rootfs_data"
Jan 1 00:00:16 OpenWrt user.notice kernel:
0x0000003f0000-0x000000400000 : "nvram"
Jan 1 00:00:17 OpenWrt user.info kernel: b44.c:v2.0
Jan 1 00:00:17 OpenWrt user.info kernel: eth0: Broadcom 44xx/47xx
10/100BaseT Ethernet 00:25:9c:3c:46:04
Jan 1 00:00:17 OpenWrt user.info kernel: BCM47xx Watchdog Timer enabled
(30 seconds, nowayout)
Jan 1 00:00:17 OpenWrt user.info kernel: TCP westwood registered
Jan 1 00:00:17 OpenWrt user.info kernel: NET: Registered protocol family 17
Jan 1 00:00:17 OpenWrt user.info kernel: 802.1Q VLAN Support v1.8 Ben
Greear <[email protected]>
Jan 1 00:00:17 OpenWrt user.info kernel: All bugs added by David S.
Miller <[email protected]>
Jan 1 00:00:17 OpenWrt user.warn kernel: VFS: Mounted root (squashfs
filesystem) readonly on device 31:2.
Jan 1 00:00:17 OpenWrt user.info kernel: Freeing unused kernel memory:
136k freed
Jan 1 00:00:17 OpenWrt user.warn kernel: Please be patient, while
OpenWrt loads ...
Jan 1 00:00:17 OpenWrt user.warn kernel: diag: Detected 'Linksys
WRT54G/GS/GL'
Jan 1 00:00:17 OpenWrt user.info kernel: b44: eth0: Link is up at 100
Mbps, full duplex.
Jan 1 00:00:17 OpenWrt user.info kernel: b44: eth0: Flow control is off
for TX and off for RX.
Jan 1 00:00:17 OpenWrt user.info kernel: roboswitch: Probing device
eth0: found a 5325! It's a 5350.
Jan 1 00:00:17 OpenWrt user.info kernel: mini_fo: using base directory: /
Jan 1 00:00:17 OpenWrt user.info kernel: mini_fo: using storage
directory: /tmp/root
Jan 1 00:00:17 OpenWrt user.info kernel: b44: eth0: powering down PHY
Jan 1 00:00:18 OpenWrt user.info kernel: b44: eth0: Link is up at 100
Mbps, full duplex.
Jan 1 00:00:18 OpenWrt user.info kernel: b44: eth0: Flow control is off
for TX and off for RX.
Jan 1 00:00:21 OpenWrt user.info kernel: device eth0.0 entered
promiscuous mode
Jan 1 00:00:21 OpenWrt user.info kernel: device eth0 entered
promiscuous mode
Jan 1 00:00:21 OpenWrt user.info kernel: br-lan: port 1(eth0.0)
entering forwarding state
Jan 1 00:00:21 OpenWrt user.info kernel: Compat-wireless backport
release: compat-wireless-2010-07-13-4-g04898a5
Jan 1 00:00:21 OpenWrt user.info kernel: Backport based on
wireless-2.6.git v2.6.35-rc6-48432-gdce358e
Jan 1 00:00:22 OpenWrt user.info kernel: cfg80211: Calling CRDA to
update world regulatory domain
Jan 1 00:00:26 OpenWrt user.info kernel: b43-phy0: Broadcom 5352 WLAN
found (core revision 9)
Jan 1 00:00:27 OpenWrt user.debug kernel: phy0: Selected rate control
algorithm 'minstrel'
Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device:
b43-phy0::tx
Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device:
b43-phy0::rx
Jan 1 00:00:27 OpenWrt user.info kernel: Registered led device:
b43-phy0::radio
Jan 1 00:00:27 OpenWrt user.info kernel: Broadcom 43xx driver loaded [
Features: PL, Firmware-ID: FW13 ]
Jan 1 00:00:28 OpenWrt user.info kernel: Broadcom 43xx-legacy driver
loaded [ Features: PLID, Firmware-ID: FW10 ]
Jan 1 00:00:28 OpenWrt user.info kernel: cfg80211: World regulatory
domain updated:
Jan 1 00:00:28 OpenWrt user.info kernel: (start_freq - end_freq @
bandwidth), (max_antenna_gain, max_eirp)
Jan 1 00:00:28 OpenWrt user.info kernel: (2402000 KHz - 2472000 KHz
@ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:28 OpenWrt user.info kernel: (2457000 KHz - 2482000 KHz
@ 20000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:28 OpenWrt user.info kernel: (2474000 KHz - 2494000 KHz
@ 20000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:28 OpenWrt user.info kernel: (5170000 KHz - 5250000 KHz
@ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:28 OpenWrt user.info kernel: (5735000 KHz - 5835000 KHz
@ 40000 KHz), (300 mBi, 2000 mBm)
Jan 1 00:00:28 OpenWrt user.info kernel: PPP generic driver version 2.4.2
Jan 1 00:00:29 OpenWrt user.info kernel: ip_tables: (C) 2000-2006
Netfilter Core Team
Jan 1 00:00:30 OpenWrt user.info kernel: NET: Registered protocol family 24
Jan 1 00:00:30 OpenWrt user.warn kernel: nf_conntrack version 0.5.0
(211 buckets, 844 max)
Jan 1 00:00:32 OpenWrt user.info kernel: batman-adv:B.A.T.M.A.N.
advanced 2010.0.0 (compatibility version 8) loaded
Jan 1 00:00:34 OpenWrt user.info sysinit: Loading defaults
Jan 1 00:00:35 OpenWrt user.info sysinit: Loading synflood protection
Jan 1 00:00:36 OpenWrt user.info sysinit: Adding custom chains
Jan 1 00:00:36 OpenWrt user.info sysinit: Loading zones
Jan 1 00:00:37 OpenWrt user.info sysinit: Loading forwarding
Jan 1 00:00:38 OpenWrt user.info sysinit: Loading redirects
Jan 1 00:00:38 OpenWrt user.info sysinit: Loading rules
Jan 1 00:00:38 OpenWrt user.info sysinit: Loading includes
Jan 1 00:00:38 OpenWrt user.info sysinit: Loading zone defaults
Jan 1 00:00:39 OpenWrt user.notice root: adding lan (br-lan) to
firewall zone lan
Jan 1 00:00:41 OpenWrt user.notice dnsmasq: DNS rebinding protection is
active, will discard upstream RFC1918 responses!
Jan 1 00:00:45 OpenWrt daemon.info dnsmasq[809]: started, version 2.55
cachesize 150
Jan 1 00:00:45 OpenWrt daemon.info dnsmasq[809]: compile time options:
IPv6 GNU-getopt no-DBus no-I18N DHCP TFTP
Jan 1 00:00:45 OpenWrt daemon.info dnsmasq[809]: using local addresses
only for domain lan
Jan 1 00:00:45 OpenWrt daemon.warn dnsmasq[809]: no servers found in
/tmp/resolv.conf.auto, will retry
Jan 1 00:00:45 OpenWrt daemon.info dnsmasq[809]: read /etc/hosts - 1
addresses
Jan 1 00:00:45 OpenWrt user.info kernel: batman-adv:Adding interface: wlan0
Jan 1 00:00:45 OpenWrt user.err kernel: batman-adv:Not using interface
wlan0 (retrying later): interface not active
Jan 1 00:00:46 OpenWrt user.warn kernel: jffs2_scan_eraseblock(): End
of filesystem marker found at 0x0
Jan 1 00:00:46 OpenWrt user.warn kernel: jffs2_build_filesystem():
unlocking the mtd device... done.
Jan 1 00:01:00 OpenWrt user.warn kernel: jffs2_build_filesystem():
erasing all blocks after the end marker... done.
Jan 1 00:01:00 OpenWrt user.info sysinit: copying files ... done
Jan 1 00:01:00 OpenWrt user.info kernel: mini_fo: using base directory: /
Jan 1 00:01:00 OpenWrt user.info kernel: mini_fo: using storage
directory: /overlay"
I disabled the batman-adv module with "rmmod batman-adv", checked if it
is really disabled via "lsmod" and then avtivating radio0 through
removing "option disabled 1" in "/etc/config/wireless". Restarting the
network works fine without any segmentation faults.
After thet I reloaded the batman-adv module and did "/etc/init.d/network
restart" again and this time it showed an segmentation fault again.
"r...@openwrt:/# /etc/init.d/network restart
Received SIGTERM
Entering released state
udhcpc (v1.15.3) started
Sending discover...
Configuration file: /var/run/hostapd-phy0.conf
Segmentation fault
Failed to start hostapd for phy0
r...@openwrt:/# Sending discover...
Sending discover..."
Here is the dmesg output after that Segmentation fault:
"r...@openwrt:/# dmesg
Linux version 2.6.32.16 (jonat...@winme-mesh1) (gcc version 4.3.3 (GCC)
) #1 Tue Aug 10 02:14:13 CEST 2010
CPU revision is: 00029008 (Broadcom BCM3302)
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0E, vendor 0x4243)
ssb: Core 1 found: Fast Ethernet (cc 0x806, rev 0x09, vendor 0x4243)
ssb: Core 2 found: MIPS 3302 (cc 0x816, rev 0x06, vendor 0x4243)
ssb: Core 3 found: USB 1.1 Host (cc 0x817, rev 0x02, vendor 0x4243)
ssb: Core 4 found: MEMC SDRAM (cc 0x80F, rev 0x01, vendor 0x4243)
ssb: Core 5 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
ssb: Core 6 found: Roboswitch (cc 0x81C, rev 0x02, vendor 0x4243)
ssb: Initializing MIPS core...
ssb: set_irq: core 0x0806, irq 4 => 4
ssb: set_irq: core 0x0816, irq 5 => 2
ssb: set_irq: core 0x0812, irq 2 => 5
ssb: after irq reconfiguration
ssb: core 0x0800, irq : 2(S) 3* 4 5 6 D I
ssb: core 0x0806, irq : 2(S) 3 4* 5 6 D I
ssb: core 0x0816, irq : 2(S)* 3 4 5 6 D I
ssb: core 0x0817, irq : 2(S) 3 4 5 6* D I
ssb: core 0x080f, irq : 2(S) 3 4 5 6 D I*
ssb: core 0x0812, irq : 2(S) 3 4 5* 6 D I
ssb: core 0x081c, irq : 2(S) 3 4 5 6 D I*
ssb: Sonics Silicon Backplane found at address 0x18000000
Serial init done.
Determined physical RAM map:
memory: 01000000 @ 00000000 (usable)
Initrd not found or empty - disabling initrd
Zone PFN ranges:
Normal 0x00000000 -> 0x00001000
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
0: 0x00000000 -> 0x00001000
On node 0 totalpages: 4096
free_area_init_node: node 0, pgdat 80283b50, node_mem_map 802c9000
Normal zone: 32 pages used for memmap
Normal zone: 0 pages reserved
Normal zone: 4064 pages, LIFO batch:0
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 4064
Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2
noinitrd console=ttyS0,115200
PID hash table entries: 64 (order: -4, 256 bytes)
Dentry cache hash table entries: 2048 (order: 1, 8192 bytes)
Inode-cache hash table entries: 1024 (order: 0, 4096 bytes)
Primary instruction cache 16kB, VIPT, 2-way, linesize 16 bytes.
Primary data cache 8kB, 2-way, VIPT, no aliases, linesize 16 bytes
Memory: 13372k/16384k available (2222k kernel code, 3012k reserved, 350k
data, 136k init, 0k highmem)
Hierarchical RCU implementation.
NR_IRQS:128
console [ttyS0] enabled
Calibrating delay loop... 199.16 BogoMIPS (lpj=398336)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
bio: create slab <bio-0> at 0
Switching to clocksource MIPS
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 512 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 512 bind 512)
TCP reno registered
NET: Registered protocol family 1
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Registering mini_fo version $Id$
JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc.
msgmni has been set to 26
io scheduler noop registered
io scheduler deadline registered (default)
Serial: 8250/16550 driver, 2 ports, IRQ sharing enabled
serial8250: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
serial8250.0: ttyS0 at MMIO 0xb8000300 (irq = 3) is a 16550A
serial8250.0: ttyS1 at MMIO 0xb8000400 (irq = 3) is a 16550A
flash init: 0x1c000000 0x02000000
Physically mapped flash: Found 1 x16 devices at 0x0 in 16-bit bank
Physically mapped flash: Found an alias at 0x400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0xc00000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1000000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1400000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1800000 for the chip at 0x0
Physically mapped flash: Found an alias at 0x1c00000 for the chip at 0x0
Amd/Fujitsu Extended Query Table at 0x0040
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Flash device: 0x400000 at 0x1fc00000
bootloader size: 262144
Updating TRX offsets and length:
old trx = [0x0000001c, 0x00000974, 0x000d2000], len=0x00271000
crc32=0x65c67278
new trx = [0x0000001c, 0x00000974, 0x000d2000], len=0x000d2000
crc32=0x7f60a9cc
Done
Creating 4 MTD partitions on "Physically mapped flash":
0x000000000000-0x000000040000 : "cfe"
0x000000040000-0x0000003f0000 : "linux"
0x000000112000-0x0000003f0000 : "rootfs"
mtd: partition "rootfs" must either start or end on erase block boundary
or be smaller than an erase block -- forcing read-only
mtd: partition "rootfs" set to be root filesystem
mtd: partition "rootfs_data" created automatically, ofs=290000, len=160000
0x000000290000-0x0000003f0000 : "rootfs_data"
0x0000003f0000-0x000000400000 : "nvram"
b44.c:v2.0
eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:25:9c:3c:46:04
BCM47xx Watchdog Timer enabled (30 seconds, nowayout)
TCP westwood registered
NET: Registered protocol family 17
802.1Q VLAN Support v1.8 Ben Greear <[email protected]>
All bugs added by David S. Miller <[email protected]>
VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
Freeing unused kernel memory: 136k freed
Please be patient, while OpenWrt loads ...
diag: Detected 'Linksys WRT54G/GS/GL'
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
roboswitch: Probing device eth0: found a 5325! It's a 5350.
mini_fo: using base directory: /
mini_fo: using storage directory: /tmp/root
b44: eth0: powering down PHY
b44: eth0: Link is up at 100 Mbps, full duplex.
b44: eth0: Flow control is off for TX and off for RX.
device eth0.0 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.0) entering forwarding state
Compat-wireless backport release: compat-wireless-2010-07-13-4-g04898a5
Backport based on wireless-2.6.git v2.6.35-rc6-48432-gdce358e
cfg80211: Calling CRDA to update world regulatory domain
b43-phy0: Broadcom 5352 WLAN found (core revision 9)
phy0: Selected rate control algorithm 'minstrel'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ]
Broadcom 43xx-legacy driver loaded [ Features: PLID, Firmware-ID: FW10 ]
cfg80211: World regulatory domain updated:
(start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
(2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
(5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
(5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
PPP generic driver version 2.4.2
ip_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 24
nf_conntrack version 0.5.0 (211 buckets, 844 max)
batman-adv:B.A.T.M.A.N. advanced 2010.0.0 (compatibility version 8) loaded
batman-adv:Adding interface: wlan0
batman-adv:Not using interface wlan0 (retrying later): interface not active
jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
jffs2_build_filesystem(): unlocking the mtd device... done.
jffs2_build_filesystem(): erasing all blocks after the end marker... done.
mini_fo: using base directory: /
mini_fo: using storage directory: /overlay
batman-adv:Removing interface: wlan0
br-lan: port 1(eth0.0) entering disabled state
device eth0 left promiscuous mode
device eth0.0 left promiscuous mode
br-lan: port 1(eth0.0) entering disabled state
device eth0.0 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.0) entering forwarding state
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
batman-adv:B.A.T.M.A.N. advanced 2010.0.0 (compatibility version 8) loaded
br-lan: port 2(wlan0) entering disabled state
br-lan: port 1(eth0.0) entering disabled state
device eth0 left promiscuous mode
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
device eth0.0 left promiscuous mode
br-lan: port 1(eth0.0) entering disabled state
device eth0.0 entered promiscuous mode
device eth0 entered promiscuous mode
br-lan: port 1(eth0.0) entering forwarding state
device wlan0 entered promiscuous mode
br-lan: port 2(wlan0) entering forwarding state
device wlan0 left promiscuous mode
br-lan: port 2(wlan0) entering disabled state
b43-phy0: Loading firmware version 410.2160 (2007-05-26 15:32:10)
CPU 0 Unable to handle kernel paging request at virtual address
00003aa1, epc == 80a982f4, ra == 80a982dc
Oops[#1]:
Cpu 0
$ 0 : 00000000 10009800 3c9c2500 80d9e800
$ 4 : 803df888 00003a9e 00003a98 00000000
$ 8 : 00000004 00000001 00000000 fffffffb
$12 : 0000000f 80238688 ffffffff 80c47bc8
$16 : 80435e80 80d9e800 80a9c314 80cd26c0
$20 : 00000008 7fd6fd80 7fd6fcd0 00000001
$24 : 0000003c 8f1bbcdc
$28 : 80c46000 80c47d58 00475028 80a982dc
Hi : 00000103
Lo : 68655100
epc : 80a982f4 0x80a982f4
Not tainted
ra : 80a982dc 0x80a982dc
Status: 10009803 KERNEL EXL IE
Cause : 0080000c
BadVA : 00003aa1
PrId : 00029008 (Broadcom BCM3302)
Modules linked in: batman_adv nf_nat_tftp nf_conntrack_tftp nf_nat_irc
nf_conntrack_irc nf_nat_ftp nf_conntrack_ftp ipt_MASQUERADE iptable_nat
nf_nat xt_NOTRACK iptable_raw xt_state nf_conntrack_ipv4 nf_defrag_ipv4
nf_conntrack pppoe pppox ipt_REJECT xt_TCPMSS ipt_LOG xt_comment
xt_multiport xt_mac xt_limit iptable_mangle iptable_filter ip_tables
xt_tcpudp x_tables ppp_async ppp_generic slhc b43legacy b43 mac80211
crc_ccitt cfg80211 compat_firmware_class compat arc4 aes_generic deflate
ecb cbc switch_robo switch_core diag [last unloaded: batman_adv]
Process hostapd (pid: 2057, threadinfo=80c46000, task=80739048,
tls=00000000)
Stack : 80435e80 80d9e800 80a9c314 80cd26c0 80435e80 80a98a5c 80e712a8
fffffff2
00000000 80d9e800 00000000 fffffff0 00000000 80d9e800 00000008
800430c0
00000000 80d9e800 00000000 801a2eb0 00000000 80d9e800 7fd6fcf0
00000000
80c47e18 8004325c 00000000 7fd6fcf0 00008914 00000000 00000000
ffffffed
80d9e800 801a6e18 802c4c90 801a7e40 00000000 0000001d 00008924
00008924
...
Call Trace:[<80a98a5c>] 0x80a98a5c
[<800430c0>] 0x800430c0
[<801a2eb0>] 0x801a2eb0
[<8004325c>] 0x8004325c
[<801a6e18>] 0x801a6e18
[<801a7e40>] 0x801a7e40
[<801a8aa4>] 0x801a8aa4
[<80190a00>] 0x80190a00
[<800a2858>] 0x800a2858
[<800a6270>] 0x800a6270
[<800a2f90>] 0x800a2f90
[<80192028>] 0x80192028
[<80191330>] 0x80191330
[<800a3034>] 0x800a3034
[<80192878>] 0x80192878
[<80003230>] 0x80003230
Code: 24c50006 88820003 98820000 <a8a20003> b8a20000 90830004
a0a30004 90820005 a0a20005
Disabling lock debugging due to kernel taint"
Hope all this info helps you, for me it's only confusing :)
With best regards,
Tim
