Signed-off-by: Marek Lindner <[email protected]>
---
 sysfs-class-net-batman-adv |   11 ++++++-----
 sysfs-class-net-mesh       |   40 ++++++++++++++++++++--------------------
 2 files changed, 26 insertions(+), 25 deletions(-)

diff --git a/sysfs-class-net-batman-adv b/sysfs-class-net-batman-adv
index 38dd762..bdc0070 100644
--- a/sysfs-class-net-batman-adv
+++ b/sysfs-class-net-batman-adv
@@ -1,4 +1,10 @@
 
+What:           /sys/class/net/<iface>/batman-adv/iface_status
+Date:           May 2010
+Contact:        Marek Lindner <[email protected]>
+Description:
+                Indicates the status of <iface> as it is seen by batman.
+
 What:           /sys/class/net/<iface>/batman-adv/mesh_iface
 Date:           May 2010
 Contact:        Marek Lindner <[email protected]>
@@ -7,8 +13,3 @@ Description:
                 displays the batman mesh interface this <iface>
                 currently is associated with.
 
-What:           /sys/class/net/<iface>/batman-adv/iface_status
-Date:           May 2010
-Contact:        Marek Lindner <[email protected]>
-Description:
-                Indicates the status of <iface> as it is seen by batman.
diff --git a/sysfs-class-net-mesh b/sysfs-class-net-mesh
index c81fe89..bc41da6 100644
--- a/sysfs-class-net-mesh
+++ b/sysfs-class-net-mesh
@@ -6,6 +6,14 @@ Description:
                 Indicates whether the batman protocol messages of the
                 mesh <mesh_iface> shall be aggregated or not.
 
+What:           /sys/class/net/<mesh_iface>/mesh/ap_isolation
+Date:           May 2011
+Contact:        Antonio Quartulli <[email protected]>
+Description:
+                Indicates whether the data traffic going from a
+                wireless client to another wireless client will be
+                silently dropped.
+
 What:           /sys/class/net/<mesh_iface>/mesh/bonding
 Date:           June 2010
 Contact:        Simon Wunderlich <[email protected]>
@@ -31,14 +39,6 @@ Description:
                 mesh will be fragmented or silently discarded if the
                 packet size exceeds the outgoing interface MTU.
 
-What:          /sys/class/net/<mesh_iface>/mesh/ap_isolation
-Date:          May 2011
-Contact:       Antonio Quartulli <[email protected]>
-Description:
-               Indicates whether the data traffic going from a
-               wireless client to another wireless client will be
-               silently dropped.
-
 What:           /sys/class/net/<mesh_iface>/mesh/gw_bandwidth
 Date:           October 2010
 Contact:        Marek Lindner <[email protected]>
@@ -60,6 +60,13 @@ Description:
                 Defines the selection criteria this node will use
                 to choose a gateway if gw_mode was set to 'client'.
 
+What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
+Date:           Oct 2010
+Contact:        Linus Lüssing <[email protected]>
+Description:
+                Defines the penalty which will be applied to an
+                originator message's tq-field on every hop.
+
 What:           /sys/class/net/<mesh_iface>/mesh/orig_interval
 Date:           May 2010
 Contact:        Marek Lindner <[email protected]>
@@ -67,19 +74,12 @@ Description:
                 Defines the interval in milliseconds in which batman
                 sends its protocol messages.
 
-What:           /sys/class/net/<mesh_iface>/mesh/hop_penalty
-Date:           Oct 2010
-Contact:        Linus Lüssing <[email protected]>
-Description:
-               Defines the penalty which will be applied to an
-               originator message's tq-field on every hop.
-
-What:          /sys/class/net/<mesh_iface>/mesh/routing_algo
-Date:          Dec 2011
-Contact:       Marek Lindner <[email protected]>
+What:           /sys/class/net/<mesh_iface>/mesh/routing_algo
+Date:           Dec 2011
+Contact:        Marek Lindner <[email protected]>
 Description:
-               Defines the routing procotol this mesh instance
-               uses to find the optimal paths through the mesh.
+                Defines the routing procotol this mesh instance
+                uses to find the optimal paths through the mesh.
 
 What:           /sys/class/net/<mesh_iface>/mesh/vis_mode
 Date:           May 2010
-- 
1.7.10.4

Reply via email to