From: Linus Luessing <[email protected]> This parameter can be set individually on each interface and allows the configuration of the ndp interval for the link quality measurements during runtime. Usually it is desirable to set it to a higher (= slower) value on interfaces which have a more static characteristic (e.g. wired interfaces) or very dense neighbourhoods to reduce overhead.
Developed by Linus during a 6 months trainee study period in Ascom (Switzerland) AG. Signed-off-by: Linus Luessing <[email protected]> Signed-off-by: Marek Lindner <[email protected]> [[email protected]: respin on top of the latest master] Signed-off-by: Antonio Quartulli <[email protected]> --- sysfs-class-net-batman-adv | 8 +++++++- sysfs.c | 7 +++++++ 2 files changed, 14 insertions(+), 1 deletion(-) diff --git a/sysfs-class-net-batman-adv b/sysfs-class-net-batman-adv index 7f34a95..2884c98 100644 --- a/sysfs-class-net-batman-adv +++ b/sysfs-class-net-batman-adv @@ -1,4 +1,11 @@ +What: /sys/class/net/<mesh_iface>/batman-adv/elp_interval +Date: Mar 2012 +Contact: Linus Lüssing <[email protected]> +Description: + Defines the interval in milliseconds in which batman + sends its probing packets for link quality measurements. + What: /sys/class/net/<iface>/batman-adv/iface_status Date: May 2010 Contact: Marek Lindner <[email protected]> @@ -12,4 +19,3 @@ Description: The /sys/class/net/<iface>/batman-adv/mesh_iface file displays the batman mesh interface this <iface> currently is associated with. - diff --git a/sysfs.c b/sysfs.c index 1e9ee3a..1d6653c 100644 --- a/sysfs.c +++ b/sysfs.c @@ -877,10 +877,17 @@ static ssize_t batadv_show_iface_status(struct kobject *kobj, static BATADV_ATTR(mesh_iface, S_IRUGO | S_IWUSR, batadv_show_mesh_iface, batadv_store_mesh_iface); static BATADV_ATTR(iface_status, S_IRUGO, batadv_show_iface_status, NULL); +#ifdef CONFIG_BATMAN_ADV_BATMAN_V +BATADV_ATTR_HIF_UINT(elp_interval, bat_v.elp_interval, S_IRUGO | S_IWUSR, + 2 * BATADV_JITTER, INT_MAX, NULL); +#endif static struct batadv_attribute *batadv_batman_attrs[] = { &batadv_attr_mesh_iface, &batadv_attr_iface_status, +#ifdef CONFIG_BATMAN_ADV_BATMAN_V + &batadv_attr_elp_interval, +#endif NULL, }; -- 1.8.5.3
