Please, include b43-dev in to/cc. W dniu 20 lutego 2011 14:31 użytkownik Christoph Thielecke <[email protected]> napisał: >> Thanks for your report! Do you need that all options at all? > I think so. I'll try to remove some and tell which is needed for working. Here > the results: > >> I think >> hwtkip=0 is default one. > Yes, works without that. > >> Parameter qos should not matter. > qos=0 is nessary, qos=1 or without doesnt work.
What does happen when it doesn't work? Do you get scan results? Can you associate? Get IP? Transmit? >> AFAIK pio is >> needed for some BCM4321s only. > pio=1 is needed, pio=0 or without doesnt work. > >> I didn't check what bad_frames_preempt >> does. > bad_frames_preempt=1 is needed, bad_frames_preempt=0 or without doesnt work. > > So the needed options are: > nohwcrypt=1 qos=0 pio=1 bad_frames_preempt=1 What does happen when it doesn't work? Do you get scan results? Can you associate? Get IP? Transmit? One request: please blacklist b43, do cold boot (turn off machine for few seconds), then boot and load b43 with: pio=1 I ask you for that, because it's possible that using DMA locks up your card. In such a case further tests can give you false results. Do you have scan results when using pio=1 after cold boot? Can you associate? -- Rafał _______________________________________________ b43-dev mailing list [email protected] http://lists.infradead.org/mailman/listinfo/b43-dev
