On 03/02/2011 06:20 AM, [email protected] wrote:
2011/3/2 Rafał Miłecki<[email protected]>:
I checked for kernels in OpenWRT.
OpenWRT 10.03 is 2.6.32.10
OpenWRT 10.03.1-rc4 is 2.6.32.25
I can see 2.6.32(.0) at least have:
b43: Add LP PHY Analog Switch Support
that's good.
Maybe compiling b43 with debugging could help to understand what is
going on? Could insmod b43.ko pio=1 be workaround?
Just to clarify. I tested 10.03-rc4 - and trunk wicth is 2.6.36.x
I will also confirm the versions tomorrow
Chris,
This problem is getting more and more curious.
I have two systems with 14e4:4315 LP PHY cards. One is x86_64 and the other is
i386. I added kmemleak checking to each and have been running networking for
about 3 hours on the 64-bit system, and 18 hours for 32 bit. Neither shows any
memory leaks associated with b43. Both are using 508.1084 firmware. Most of the
tests were in STA mode, but a few minutes with one hosting an AP for the other
has not shown any leaks.
I imagine that memory is pretty tight on the openWRT system. Does "free" work
there? If so, what are the results just before you start the bridging?
Larry
_______________________________________________
b43-dev mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/b43-dev
