2011/4/7 Gregory Bellier <gregory.bell...@gmail.com>: > Dear list, > > I would like to test the b43 driver for a BCM4322. I tried with 2.6.38.2 and > 2.6.39-rc2 but I'm stuck with a firmware error in dmesg : > [ 75.922582] b43-phy0 ERROR: Firmware file "b43/ucode16_mimo.fw" not found > [ 75.922587] b43-phy0 ERROR: Firmware file "b43-open/ucode16_mimo.fw" not > found > [ 75.922590] b43-phy0 ERROR: You must go to > http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download > the correct firmware for this driver version. Please carefully read all > instructions on this website. > > I have b43-fwcutter v13. > > # b43-fwcutter -w /lib/firmware/ broadcom-wl-4.178.10.4/linux/wl_apsta.o > This file is recognised as: > ID : FW15 > filename : wl_apsta.o > version : 478.104 > MD5 : bb8537e3204a1ea5903fe3e66b5e2763 > Extracting b43/ucode5.fw > Extracting b43/pcm5.fw > Extracting b43/b0g0bsinitvals5.fw > Extracting b43/a0g0bsinitvals5.fw > Extracting b43/b0g0initvals5.fw > Extracting b43/a0g1initvals5.fw > Extracting b43/a0g0initvals5.fw > Extracting b43/a0g1bsinitvals5.fw > Extracting b43/ucode9.fw > Extracting b43/a0g1initvals9.fw > Extracting b43/a0g0bsinitvals9.fw > Extracting b43/b0g0bsinitvals9.fw > Extracting b43/b0g0initvals9.fw > Extracting b43/a0g1bsinitvals9.fw > Extracting b43/a0g0initvals9.fw > Extracting b43/ucode11.fw > Extracting b43/n0bsinitvals11.fw > Extracting b43/n0absinitvals11.fw > Extracting b43/n0initvals11.fw > Extracting b43/ucode13.fw > Extracting b43/b0g0initvals13.fw > Extracting b43/a0g1bsinitvals13.fw > Extracting b43/a0g1initvals13.fw > Extracting b43/lp0bsinitvals13.fw > Extracting b43/b0g0bsinitvals13.fw > Extracting b43/lp0initvals13.fw > Extracting b43/ucode14.fw > Extracting b43/lp0initvals14.fw > Extracting b43/lp0bsinitvals14.fw > Extracting b43/ucode15.fw > Extracting b43/lp0bsinitvals15.fw > Extracting b43/lp0initvals15.fw > Extracting b43/ucode16.fw > Extracting b43/n0bsinitvals16.fw > Extracting b43/sslpn0initvals16.fw > Extracting b43/n0initvals16.fw > Extracting b43/lp0initvals16.fw > Extracting b43/sslpn0bsinitvals16.fw > Extracting b43/lp0bsinitvals16.fw > > Did I miss something ? I promise I read carefully. > > Sorry, I wrote this email in several times. I finally did a symlink in > /lib/firmware/b43 : # sudo ln -s ucode16.fw ucode16_mimo.fw > And it worked like this.
Symlink should work for now. The real solution is not use: http://mirror2.openwrt.org/sources/broadcom-wl-5.10.56.27.3_mipsel.tar.bz2 and the newest fwcutter (which is needed to support this 5.10.56.27.3). I still hope to get easy access to newer broadcom-wl, so I'm waiting with updating howto on wiki page. I just mailed OpenWRT team day or two ago. -- Rafał _______________________________________________ b43-dev mailing list b43-dev@lists.infradead.org http://lists.infradead.org/mailman/listinfo/b43-dev
