LP-PHY code is SSB specific, add check for bus type.
Signed-off-by: Rafał Miłecki <[email protected]>
---
drivers/net/wireless/b43/phy_lp.c | 15 ++++++++++-----
1 files changed, 10 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_lp.c
b/drivers/net/wireless/b43/phy_lp.c
index 2606c25..daec1d9 100644
--- a/drivers/net/wireless/b43/phy_lp.c
+++ b/drivers/net/wireless/b43/phy_lp.c
@@ -214,7 +214,7 @@ static void lpphy_table_init(struct b43_wldev *dev)
static void lpphy_baseband_rev0_1_init(struct b43_wldev *dev)
{
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_bus *bus = dev->dev->sdev->bus;
struct ssb_sprom *sprom = dev->dev->bus_sprom;
struct b43_phy_lp *lpphy = dev->phy.lp;
u16 tmp, tmp2;
@@ -519,7 +519,7 @@ struct b2062_freqdata {
static void lpphy_2062_init(struct b43_wldev *dev)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_bus *bus = dev->dev->sdev->bus;
u32 crystalfreq, tmp, ref;
unsigned int i;
const struct b2062_freqdata *fd = NULL;
@@ -1289,7 +1289,7 @@ finish:
static void lpphy_rev2plus_rc_calib(struct b43_wldev *dev)
{
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_bus *bus = dev->dev->sdev->bus;
u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
u8 tmp = b43_radio_read(dev, B2063_RX_BB_SP8) & 0xFF;
int i;
@@ -2428,7 +2428,7 @@ static int lpphy_b2062_tune(struct b43_wldev *dev,
unsigned int channel)
{
struct b43_phy_lp *lpphy = dev->phy.lp;
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_bus *bus = dev->dev->sdev->bus;
const struct b206x_channel *chandata = NULL;
u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
u32 tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7, tmp8, tmp9;
@@ -2518,7 +2518,7 @@ static void lpphy_b2063_vco_calib(struct b43_wldev *dev)
static int lpphy_b2063_tune(struct b43_wldev *dev,
unsigned int channel)
{
- struct ssb_bus *bus = dev->sdev->bus;
+ struct ssb_bus *bus = dev->dev->sdev->bus;
static const struct b206x_channel *chandata = NULL;
u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000;
@@ -2666,6 +2666,11 @@ static int b43_lpphy_op_init(struct b43_wldev *dev)
{
int err;
+ if (dev->dev->bus_type != B43_BUS_SSB) {
+ b43err(dev->wl, "LP-PHY is supported only on SSB!\n");
+ return -EOPNOTSUPP;
+ }
+
lpphy_read_band_sprom(dev); //FIXME should this be in prepare_structs?
lpphy_baseband_init(dev);
lpphy_radio_init(dev);
--
1.7.3.4
_______________________________________________
b43-dev mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/b43-dev
