We don't know yet when to restore it, implement just reading. We found
out what for are that PHY ops by comparing HT with N code.
Signed-off-by: Rafał Miłecki <zaj...@gmail.com>
---
drivers/net/wireless/b43/phy_ht.c | 11 ++++++++++-
drivers/net/wireless/b43/phy_ht.h | 4 ++++
2 files changed, 14 insertions(+), 1 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_ht.c
b/drivers/net/wireless/b43/phy_ht.c
index c0e436c..4d6345e 100644
--- a/drivers/net/wireless/b43/phy_ht.c
+++ b/drivers/net/wireless/b43/phy_ht.c
@@ -212,6 +212,13 @@ static void b43_phy_ht_force_rf_sequence(struct b43_wldev
*dev, u16 rf_seq)
b43_phy_write(dev, B43_PHY_HT_RF_SEQ_MODE, save_seq_mode);
}
+static void b43_phy_ht_read_clip_detection(struct b43_wldev *dev, u16 *clip_st)
+{
+ clip_st[0] = b43_phy_read(dev, B43_PHY_HT_C1_CLIP1THRES);
+ clip_st[1] = b43_phy_read(dev, B43_PHY_HT_C2_CLIP1THRES);
+ clip_st[2] = b43_phy_read(dev, B43_PHY_HT_C3_CLIP1THRES);
+}
+
static void b43_phy_ht_bphy_init(struct b43_wldev *dev)
{
unsigned int i;
@@ -335,6 +342,7 @@ static void b43_phy_ht_op_prepare_structs(struct b43_wldev
*dev)
static int b43_phy_ht_op_init(struct b43_wldev *dev)
{
u16 tmp;
+ u16 clip_state[3];
b43_phy_ht_tables_init(dev);
@@ -443,7 +451,8 @@ static int b43_phy_ht_op_init(struct b43_wldev *dev)
/* TODO: PHY op on reg 0xb0 */
- /* TODO: PHY ops on regs 0x40e, 0x44e, 0x48e */
+ /* TODO: Should we restore it? Or store it in global PHY info? */
+ b43_phy_ht_read_clip_detection(dev, clip_state);
if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ)
b43_phy_ht_bphy_init(dev);
diff --git a/drivers/net/wireless/b43/phy_ht.h
b/drivers/net/wireless/b43/phy_ht.h
index 0661ae2..6544c42 100644
--- a/drivers/net/wireless/b43/phy_ht.h
+++ b/drivers/net/wireless/b43/phy_ht.h
@@ -19,6 +19,10 @@
#define B43_PHY_HT_BW5 0x1D2
#define B43_PHY_HT_BW6 0x1D3
+#define B43_PHY_HT_C1_CLIP1THRES B43_PHY_OFDM(0x00E)
+#define B43_PHY_HT_C2_CLIP1THRES B43_PHY_OFDM(0x04E)
+#define B43_PHY_HT_C3_CLIP1THRES B43_PHY_OFDM(0x08E)
+
#define B43_PHY_HT_RF_SEQ_MODE B43_PHY_EXTG(0x000)
#define B43_PHY_HT_RF_SEQ_TRIG B43_PHY_EXTG(0x003)
#define B43_PHY_HT_RF_SEQ_TRIG_RX2TX 0x0001 /* RX2TX */
--
1.7.3.4
_______________________________________________
b43-dev mailing list
b43-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev
