hi,
just to report a success with this card: Linksys WMP54GS v1.1 PCI
http://homesupport.cisco.com/en-us/wireless/lbc/WMP54GS
Maybe someone could add this info to Supported Devices:
http://linuxwireless.org/en/users/Drivers/b43/devices
0000:00:06.0 Network controller: Broadcom Corporation BCM4318 [AirForce One
54g] 802.11g Wireless LAN Controller (rev 02)
Subsystem: Linksys WMP54GS v1.1 802.11g Wireless-G PCI Adapter with
SpeedBooster
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 9
Region 0: Memory at 80002000 (32-bit, non-prefetchable) [size=8K]
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
root@pegasos2:~# crux
CRUX PPC (32 bit) version 2.7
root@pegasos2:~# uname -a
Linux pegasos2 3.1.1 #1 PREEMPT Fri Nov 18 21:43:16 CET 2011 ppc 7447/7457,
altivec supported CHRP Pegasos2 GNU/Linux
root@pegasos2:~# lsmod |grep b43
b43 160368 0
mac80211 170782 1 b43
cfg80211 143001 2 b43,mac80211
ssb 37916 1 b43
root@pegasos2:~# lspci -vnn | grep 14e4
0000:00:06.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce
One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
root@pegasos2:~# dmesg |grep b43
b43-pci-bridge 0000:00:06.0: enabling device (0000 -> 0002)
b43-phy0: Broadcom 4318 WLAN found (core revision 9)
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
b43-phy0: Loading firmware version 508.1084 (2009-01-14 01:32:01)
--
acrux <acrux...@libero.it>
_______________________________________________
b43-dev mailing list
b43-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev
