Am 26.07.2012 08:10, schrieb Rafał Miłecki:
> 2012/7/26 Gábor Stefanik <netrolller...@gmail.com>:
>> On Thu, Jul 26, 2012 at 8:16 AM, Rafał Miłecki <zaj...@gmail.com> wrote:
>>> First of all, use PHY names instead of magic numbers. It should make
>>> configuring kernel easier in case of not enabled PHY type support.
>>> Secondly, always print info about PHY. This is really basic info about
>>> hardware and quite important for the support level.
>>>
>>> Signed-off-by: Rafał Miłecki <zaj...@gmail.com>
>>> ---
>>> V2: add new PHYTYPEs
>>> V3: don't printk error in b43_phy_name, just return "UNKNOWN". We still
>>> can know PHY type thanks to change in caller, which prints both:
>>> %d and %s. Thanks Joe!
>>> ---
>>> drivers/net/wireless/b43/b43.h | 2 ++
>>> drivers/net/wireless/b43/main.c | 39
>>> ++++++++++++++++++++++++++++++++++-----
>>> 2 files changed, 36 insertions(+), 5 deletions(-)
>>>
>>> diff --git a/drivers/net/wireless/b43/b43.h b/drivers/net/wireless/b43/b43.h
>>> index 7c899fc..b0c7f47 100644
>>> --- a/drivers/net/wireless/b43/b43.h
>>> +++ b/drivers/net/wireless/b43/b43.h
>>> @@ -415,6 +415,8 @@ enum {
>>> #define B43_PHYTYPE_HT 0x07
>>> #define B43_PHYTYPE_LCN 0x08
>>> #define B43_PHYTYPE_LCNXN 0x09
>>> +#define B43_PHYTYPE_LCN40 0x0a
>>> +#define B43_PHYTYPE_AC 0x0b
>>>
>>> /* PHYRegisters */
>>> #define B43_PHY_ILT_A_CTRL 0x0072
>>> diff --git a/drivers/net/wireless/b43/main.c
>>> b/drivers/net/wireless/b43/main.c
>>> index b80352b..a8f812b 100644
>>> --- a/drivers/net/wireless/b43/main.c
>>> +++ b/drivers/net/wireless/b43/main.c
>>> @@ -4277,6 +4277,35 @@ out:
>>> return err;
>>> }
>>>
>>> +static char *b43_phy_name(struct b43_wldev *dev, u8 phy_type)
>>> +{
>>> + switch (phy_type) {
>>> + case B43_PHYTYPE_A:
>>> + return "A";
>>> + case B43_PHYTYPE_B:
>>> + return "B";
>>> + case B43_PHYTYPE_G:
>>> + return "G";
>>> + case B43_PHYTYPE_N:
>>> + return "N";
>>> + case B43_PHYTYPE_LP:
>>> + return "LP";
>>> + case B43_PHYTYPE_SSLPN:
>>> + return "SSLPN";
>>> + case B43_PHYTYPE_HT:
>>> + return "HT";
>>> + case B43_PHYTYPE_LCN:
>>> + return "LCN";
>>> + case B43_PHYTYPE_LCNXN:
>>> + return "LCNXN";
>>> + case B43_PHYTYPE_LCN40:
>>> + return "LCN40";
>>> + case B43_PHYTYPE_AC:
>>> + return "AC";
>>> + }
>>> + return "UNKNOWN";
>>
>> How about putting the PHY type ID into the string in the Unknown case?
>> Or will it be printed somewhere else?
>
> Hm, maybe I don't see something obvious. How would you do that? Using
> which function?
>
No need to, it is done here:
b43info(dev->wl, "Found PHY: Analog %u, Type %d (%s), Revision %u\n",
analog_type, phy_type, b43_phy_name(dev, phy_type), phy_rev);
--
Regards,
Oleksij
_______________________________________________
b43-dev mailing list
b43-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev
