Some devices may have different features despite sharing the same ID
(e.g. PCI ID). For example 14e4:4331 is usually a dual band, but this
can be "limited". Device with "pci/x/y/devid=0x4332" supports 2.4 GHz
only. Similarly 0x4333 will mean support for 5 GHz only.
Add entry in SPROM so info described above can be extracted and stored.

Signed-off-by: Rafał Miłecki <zaj...@gmail.com>
---
I managed to find "devid" on every common SPROM rev:
pci/1/1/sromrev=2
pci/1/1/devid=0x4318

pci/1/1/sromrev=4
pci/1/1/devid=0x4329

pci/1/1/sromrev=8
pci/1/1/devid=0x432d

pci/1/1/sromrev=9
pci/1/1/devid=0x4332

pci/1/1/sromrev=11
pci/1/1/devid=0x43a1

So it makes the most sense to always try to extract it.
---
 arch/mips/bcm47xx/sprom.c | 1 +
 include/linux/ssb/ssb.h   | 1 +
 2 files changed, 2 insertions(+)

diff --git a/arch/mips/bcm47xx/sprom.c b/arch/mips/bcm47xx/sprom.c
index a8b5408..da4cdb1 100644
--- a/arch/mips/bcm47xx/sprom.c
+++ b/arch/mips/bcm47xx/sprom.c
@@ -168,6 +168,7 @@ static void nvram_read_alpha2(const char *prefix, const 
char *name,
 static void bcm47xx_fill_sprom_r1234589(struct ssb_sprom *sprom,
                                        const char *prefix, bool fallback)
 {
+       nvram_read_u16(prefix, NULL, "devid", &sprom->dev_id, 0, fallback);
        nvram_read_u8(prefix, NULL, "ledbh0", &sprom->gpio0, 0xff, fallback);
        nvram_read_u8(prefix, NULL, "ledbh1", &sprom->gpio1, 0xff, fallback);
        nvram_read_u8(prefix, NULL, "ledbh2", &sprom->gpio2, 0xff, fallback);
diff --git a/include/linux/ssb/ssb.h b/include/linux/ssb/ssb.h
index 07ef9b8..4568a5c 100644
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -33,6 +33,7 @@ struct ssb_sprom {
        u8 et1phyaddr;          /* MII address for enet1 */
        u8 et0mdcport;          /* MDIO for enet0 */
        u8 et1mdcport;          /* MDIO for enet1 */
+       u16 dev_id;             /* Device ID overriding e.g. PCI ID */
        u16 board_rev;          /* Board revision number from SPROM. */
        u16 board_num;          /* Board number from SPROM. */
        u16 board_type;         /* Board type from SPROM. */
-- 
1.8.4.5


_______________________________________________
b43-dev mailing list
b43-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev

Reply via email to