This allows new devices users to save some space.
Signed-off-by: Rafał Miłecki <zaj...@gmail.com>
---
drivers/net/wireless/b43/Kconfig | 9 +++++++++
drivers/net/wireless/b43/Makefile | 6 +-----
drivers/net/wireless/b43/main.c | 2 ++
drivers/net/wireless/b43/phy_common.c | 2 ++
4 files changed, 14 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/b43/Kconfig b/drivers/net/wireless/b43/Kconfig
index e3f67b8..037a4e3 100644
--- a/drivers/net/wireless/b43/Kconfig
+++ b/drivers/net/wireless/b43/Kconfig
@@ -122,6 +122,15 @@ config B43_PIO
select SSB_BLOCKIO
default y
+config B43_PHY_G
+ bool "Support for G-PHY (802.11g) devices"
+ depends on B43 && B43_SSB
+ default y
+ ---help---
+ This PHY type can be found in the following chipsets:
+ PCI: BCM4306, BCM4311, BCM4318
+ SoC: BCM4712, BCM5352E
+
config B43_PHY_N
bool "Support for 802.11n (N-PHY) devices"
depends on B43
diff --git a/drivers/net/wireless/b43/Makefile
b/drivers/net/wireless/b43/Makefile
index 098fe9e..6e00b88 100644
--- a/drivers/net/wireless/b43/Makefile
+++ b/drivers/net/wireless/b43/Makefile
@@ -1,13 +1,11 @@
b43-y += main.o
b43-y += bus.o
-b43-y += tables.o
+b43-$(CONFIG_B43_PHY_G) += phy_a.o phy_g.o tables.o lo.o wa.o
b43-$(CONFIG_B43_PHY_N) += tables_nphy.o
b43-$(CONFIG_B43_PHY_N) += radio_2055.o
b43-$(CONFIG_B43_PHY_N) += radio_2056.o
b43-$(CONFIG_B43_PHY_N) += radio_2057.o
b43-y += phy_common.o
-b43-y += phy_g.o
-b43-y += phy_a.o
b43-$(CONFIG_B43_PHY_N) += phy_n.o
b43-$(CONFIG_B43_PHY_LP) += phy_lp.o
b43-$(CONFIG_B43_PHY_LP) += tables_lpphy.o
@@ -17,8 +15,6 @@ b43-$(CONFIG_B43_PHY_HT) += radio_2059.o
b43-$(CONFIG_B43_PHY_LCN) += phy_lcn.o tables_phy_lcn.o
b43-y += sysfs.o
b43-y += xmit.o
-b43-y += lo.o
-b43-y += wa.o
b43-y += dma.o
b43-y += pio.o
b43-y += rfkill.o
diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c
index 4164afa..9cf07bb 100644
--- a/drivers/net/wireless/b43/main.c
+++ b/drivers/net/wireless/b43/main.c
@@ -4306,10 +4306,12 @@ static int b43_phy_versioning(struct b43_wldev *dev)
phy_type = (tmp & B43_PHYVER_TYPE) >> B43_PHYVER_TYPE_SHIFT;
phy_rev = (tmp & B43_PHYVER_VERSION);
switch (phy_type) {
+#ifdef CONFIG_B43_PHY_G
case B43_PHYTYPE_G:
if (phy_rev > 9)
unsupported = 1;
break;
+#endif
#ifdef CONFIG_B43_PHY_N
case B43_PHYTYPE_N:
if (phy_rev > 9)
diff --git a/drivers/net/wireless/b43/phy_common.c
b/drivers/net/wireless/b43/phy_common.c
index ce486ee..3cbef21 100644
--- a/drivers/net/wireless/b43/phy_common.c
+++ b/drivers/net/wireless/b43/phy_common.c
@@ -46,7 +46,9 @@ int b43_phy_allocate(struct b43_wldev *dev)
switch (phy->type) {
case B43_PHYTYPE_G:
+#ifdef CONFIG_B43_PHY_G
phy->ops = &b43_phyops_g;
+#endif
break;
case B43_PHYTYPE_N:
#ifdef CONFIG_B43_PHY_N
--
1.8.4.5
_______________________________________________
b43-dev mailing list
b43-dev@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/b43-dev
