Sir, We are experimenting with four raspberry pis and we installed babel on each of them. We want to test multihop feature of babel. We did the following 1. We started the babel in four pi's. sudo babeld wlan0 & 2. Then issued "route" command from terminal to show the routing table. This brings up the routing table 3. We ping one of the pi's (From A to B) ....and started moving B. After successful ping for sometime we get destination unreachable at a certain point. We introduced another pi (C) in between, hoping that A will reach (ping request) B through C. But it didnt. Also traceroute C gives one hop distance from A.
Thanks _______________________________________________ Babel-users mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/babel-users
