Dear all, Babeld-1.10 is available from
https://www.irif.fr/~jch//software/files/babeld-1.10.tar.gz https://www.irif.fr/~jch//software/files/babeld-1.10.tar.gz.asc For more information about babeld and the Babel routing protocol, please see https://www.irif.fr/~jch/software/babel/ This is just a minor relase, but I've called it 1.10 due to an incompatible change: I've removed the disambiguation algorithm, which drastically simplifies the code at the cost of disabling source-specific routing for IPv4. For IPv6, you'll need Linux 3.11 or later to get source-specific routing to work; since 3.11 was released almost eight years ago, this should not be a problem. There's yet another compliance fix, due to Fabian Blaese. As far as I'm aware, this version of babeld is fully compliant with RFC 8966, the new version of the Babel routing protocol. The next version will hopefully be babeld-2.0, for which I'm planning: * an implementation of Babel-MAC (RFC 8967); this is at https://github.com/jech/babeld/pull/52 * an implementation of v4-via-v6 (draft-ietf-babel-v4viav6); this is at https://github.com/jech/babeld/pull/56 Enjoy, -- Juliusz Chroboczek 25 April 2021: babeld-1.10 * Removed the disambiguation code: source-specific routing is no longer supported for IPv4, and for IPv6 only on Linux 3.11 or later. * Fixed an issue handling of retractions with no next hop, which caused interoperability problems with BIRD. Thanks to Fabian Bläse. * If skip-kernel-setup is set, we no longer disable the rp_filter, which makes babeld work in containers. Thanks to Martin Weinelt. _______________________________________________ Babel-users mailing list [email protected] https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/babel-users
