Hi,
I am new and i would like to understand how to set bird2 to use babel
protocol.
My structure is a debian server with openvpn and bird2, the clients are
openwrt routers with bird2.
I want to get something like this:
# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric
Ref Use Iface
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0
eth0.2
10.27.0.0 10.27.253.14 255.255.255.0 UG 2 0 0
vpnbas
10.27.0.1 10.27.253.14 255.255.255.255 UGH 2 0 0 vpnbas
10.27.22.0 0.0.0.0 255.255.255.0 U 0
0 0 br-lan
10.27.23.0 10.27.253.20 255.255.255.0 UG 2 0 0
vpnbas
10.27.23.1 10.27.253.20 255.255.255.255 UGH 2 0 0 vpnbas
10.27.24.0 10.27.253.20 255.255.255.0 UG 2 0 0
vpnbas
10.27.24.1 10.27.253.20 255.255.255.255 UGH 2 0 0 vpnbas
10.27.253.0 0.0.0.0 255.255.255.0 U 0 0
0 vpnbas
10.27.253.1 10.27.253.1 255.255.255.255 UGH 2 0 0 vpnbas
172.27.0.0 0.0.0.0 255.255.0.0 U 0
0 0 br-mesh
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0
0 eth0.2
Thanks.
Best regards,
Michele
_______________________________________________
Babel-users mailing list
[email protected]
https://alioth-lists.debian.net/cgi-bin/mailman/listinfo/babel-users
