I've been trying to put together a wireless mesh network with one openwrt lynksys router and 2 linux laptops. After reading the documentation and the readme and the --help to both ahcpd and babel, I still can't make it work. I want the router to be a "stateful autoritative ahcpd server with babel routing" that gives ipv6 and ipv4 adresses and that is staticaly configured! One laptop should be a "stateful ahcpd server with babel routing" that is configured by the router then configures the second laptop. Also if the above laptop fails (is shut down/ falls from the faculty floor) the second laptop should contact the router and reconfigure routing.
I've tried running
ahcp-generate -p fde6:20f5:c9ac:358: -P babel -n fde6:20f5:c9ac:358:1 -g
192.168.1.1 > ahcp.dat
ahcpd -d 99 -a /tmp/ahcp.dat -S 192.168.1.200 192.168.1.254 /tmp/ahcp-leases -n
-c /tmp/dummy-config.sh wl0 br-lan
on the Router and "ahcpd -d 99 wlan0" on the client
MENTION: both router and laptop client were essid="WPIT" mod="Ad-hoc" signal
strength=100%
the console messages on the server
"creat(unique_id): No such file or directory
Entering main loop.
Sleeping for 3.355s.
Sending AHCP reply on wl0..."
the console messages on the laptop client is attached
but some strange ipv6 is added to the laptop's wlan0 ::213:e8ff:feec:9a65
and no ipv4 for the client(no gateway, no dns).
CAN ANYONE PLS send some specific instructions on HOW to get this working
SERVER---> CLIENT_SERVER----->CLIENT with babel routing!
Thanks in advance and waiting a reply
AHCPDdatalog
Description: Binary data
_______________________________________________ Babel-users mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/babel-users
