I would like to know that manet protocols based on layer-3 such babel (olsr or batmand) seem to be properly working with the nodes established with babel. On the other hand, the nodes such as PC or IP Camera not capable of supporting babel within the network can not be joined to the network? In general, layer-2 based mesh network has no issue about this one but it has some limitations such as scalability and delay of route changes due to the use of STP.
Any comments are very appreciated... On Thu, Oct 21, 2010 at 10:35 AM, mason <[email protected]> wrote: > Although I flushed all of the tables in a firewall as you recommended, but > it still produces the same results, blocking. > FYI, I only imposed "route redistribute" setting only at 172.16.1.121 node > like > redistribute ip 0.0.0.0/0 le 0 metric 128. > > - > mason > > > > On Thu, Oct 21, 2010 at 12:52 AM, Juliusz Chroboczek < > [email protected]> wrote: > >> > In addition, at Node2, I can get the following routing table. >> Especially, >> > routing table flag of 172.16.1.123 or 1010.1.123 has to be U not UGH. Is >> it >> > something wrong? >> >> No, that's fine. >> >> Please disable all the firewalls on all of your nodes, and try again. >> >> iptables -F INPUT >> iptables -F OUTPUT >> iptables -F FORWARD >> >> Juliusz >> > > > >
_______________________________________________ Babel-users mailing list [email protected] http://lists.alioth.debian.org/mailman/listinfo/babel-users
