In my network the node BitArno has: BitArno ~ # cat /etc/babeld/babeld.conf | wgetpaste Your paste can be seen here: http://bpaste.net/show/85167/ BitArno ~ # ip address show | wgetpaste Your paste can be seen here: http://bpaste.net/show/85168/ BitArno ~ # ip route show | wgetpaste Your paste can be seen here: http://bpaste.net/show/85169/ BitArno ~ # ip route show table local | wgetpaste Your paste can be seen here: http://bpaste.net/show/85170/
node G10h4ckLab has: G10h4ckLab ~ # cat /etc/babeld/babeld.conf | wgetpaste Your paste can be seen here: http://bpaste.net/show/85171/ G10h4ckLab ~ # ip address show | wgetpaste Your paste can be seen here: http://bpaste.net/show/85173/ G10h4ckLab ~ # ip route show | wgetpaste Your paste can be seen here: http://bpaste.net/show/85174/ G10h4ckLab ~ # ip route show table local | wgetpaste Your paste can be seen here: http://bpaste.net/show/85175/ Now the problem on G10h4cklab and all other nodes the route 10.175.1.111 via 10.0.1.111 dev isole proto 42 onlink doesn't appear while the route for address of the other nodes appear i add to add this route on BitArno 10.175.1.111/32 dev eth1 scope link metric 3 as workaround to make it appear also the other address from BitArno doesn't appear but i had no interest on them so i didn't added workaround route why this beavior? and why it is not happening for other nodes? Thanks!! _______________________________________________ Babel-users mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/babel-users
