Hello,
> Before beginning the tests in real life, i would like to know if anyone of
> you could make it work properly and share its configuration (my thoughts are
> about the need to use, or to not use, a bridge interface "br0") :
> - Bridge : What is the recommended configuration refering bridging : should i
> create a bridge (br0) for wlan0 and wlan1 or not ?
No ! Or babeld will not be able to use each interface, as it should.
> - IP Addresses :
> -> must i assign a unique IP address do each wlan interface (or a unique
> to br0)
> -> if i must assign two different IP addresses (one per wlan interface),
> must i assign an IP address in different or same subnet (192.168.1.0/28 and
> 192.168.2.0/28 OR both in 192.168.1.0/28) ?
For this purpose, we use one unique IP address for all interfaces. For
example, on omicron (openwrt) we use :
$ cat /etc/config/network
[…]
config interface 'wifi0'
option ifname 'wlan0'
option proto 'static'
option ipaddr '192.168.4.39/32'
list ip6addr '2001:41d0:1:f19f:e246:9aff:fe4e:912e/128'
list ip6addr '2001:05c0:1505:6b00:e246:9aff:fe4e:912e/128'
config interface 'wifi1'
option ifname 'wlan1'
option proto 'static'
option ipaddr '192.168.4.39/32'
list ip6addr '2001:41d0:1:f19f:e246:9aff:fe4e:912e/128'
list ip6addr '2001:05c0:1505:6b00:e246:9aff:fe4e:912e/128'
[…]
Note there is two v6 addresses, but they are on both interfaces.
> - Babeld : as i could read in the docs, i should then start babeld with
> option "wlan0 wlan1"
Yes, or alternatively, put "interface wlan0" and "interface wlan1" in the
config file.
> thanks a lot in advance for your help
You're welcome !
Matthieu
_______________________________________________
Babel-users mailing list
[email protected]
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/babel-users
