The clients are not running on babeld...how can i configure the routes? On Feb 10, 2015 2:14 AM, "Juliusz Chroboczek" <[email protected]> wrote:
> > Consider I have three routers R1,R2,R3. Each of them are configured with > an ad > > hoc network and an access point respectively. The ssid of the of the ad > hoc > > network of all the routers be mesh and that of the access points be > C0,C1,C2. > > The router is running on babel protocol on wireless interface. So when a > > client say laptop connects to the access point C0 and another laptop > connect > > to C2 then can C0 and C2 communicate with each other at 2 hops without > any > > configuration of babel? > > Are the clients running Babel? > > If so, then everything should happen automatically. > > If not, then the routers will be able to communicate between themselves > (they're running Babel), but you will need some additional mechanism to > route packets towards the clients. > > Please read "redistribution" in the Babel manual page and in the Babel FAQ. > Once you have done that, please come back and tell us more about your > setup. > > -- Juliusz >
_______________________________________________ Babel-users mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/babel-users
