On Tue, Mar 24, 2015 at 7:12 PM, Sahana k.srinivas <[email protected]> wrote:
> Hi, > > Sorry there was a mistake in the previous mail. So here is the corrected > version. > I am having trouble setting up client to client communication in a > wireless network. > Consider I have three routers R1, R2, R3. Each of them are configured with > an ad-hoc network and an access point respectively. The wireless interface > is divided into two modes, one running ad-hoc mode (wlan0) and other access > point (wlan0-1). The ssid of the of the ad-hoc network of all the routers > is "mesh" (ip 192.168.1.x) and that of the access points is C0, C1, C2 > (192.168.2.x) of routers R1, R2, R3respectively. The router is running > BABEL on wireless interface (wlan0). So when a client, say laptop > connects to the access point C0 of R1 and another laptop connects to C2 of > R3, then can C0 and C2 communicate with each other at 2 hops? if so how? > > Thanks in advance :) > > first see my previous email, then, you could also potentially install babel on the client nodes if unix :) but shouldnt be neccessary with the proper routing, wireless configuration and filtering rules > > Regards, > Sahana > > On Tue, Mar 24, 2015 at 1:16 PM, Sahana k.srinivas <[email protected]> > wrote: > >> Hi, >> >> I am having trouble setting up client to client communication in a >> wireless network. >> Consider I have three routers R1, R2, R3. Each of them are configured >> with an ad-hoc network and an access point respectively. The wireless >> interface is divided into two modes, one running ad-hoc mode (wlan0) and >> other access point (wlan0-1). The ssid of the of the ad-hoc network of all >> the routers is "mesh" (ip 192.168.1.x) and that of the access points is C0, >> C1, C2 (192.168.2.x) of routers R1, R2, R3respectively. The router is >> running OLSRD on wireless interface (wlan0). So when a client, say laptop >> connects to the access point C0 of R1 and another laptop connects to C2 of >> R3, then can C0 and C2 communicate with each other at 2 hops? if so how? >> >> Thanks in advance :) >> >> >> Regards, >> Sahana >> > > > _______________________________________________ > Babel-users mailing list > [email protected] > http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/babel-users >
_______________________________________________ Babel-users mailing list [email protected] http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/babel-users
