Re: [Babel-users] babeld output on status socket - change neighbour

[Christof Schulze]

Hi Juliusz,

Under which conditions are rtt and rttcost included?

When we've received a valid timestamp from the neighbour within the last
three minutes (see valid_rtt in neighbour.c).

A zero rtt is strange; could you please send us your configuration?

This is openwrt running lede on a x86-64 VM and the current openwrt babel package wit h version 1.8 connecting to a debian server using fastd. the fastd-interface called mesh-vpn is one of babels interfaces.

On the server I have babeld-1.7.1-71-g556af3c installed.

This is the server-side configuration of babeld:
Ipv6-subtrees true
Export-table 10
Import-table 11
Import-table 12

Interface mesh-vpn-1312
Interface eth2
Redistribute metric 256


On the openwrt-VM I am running this config:
ipv6-subtrees true
Export-table 10
Import-table 255
Import-table 11
Redistribute ip 2a06:8187:fbab:2::1/128 deny
Redistribute ip 2a06:8187:fbab:2::/64 eq 128  allow
Redistribute ip 2a06:8187:fbab:1::/64 eq 128  allow
Redistribute local  deny
Redistribute ip ::/0 eq 0  allow





Christof

--
()  ascii ribbon campaign - against html e-mail
/\  against proprietary attachments

Babeld is started on interface "lo" where there is no real traffic but babeld insists on starting with an interface. The interface mesh-vpn (fastd-interface) is added via add interface on the socket during fastd runtime. It seems sometimes rtt is reported and sometimes it is not and I cannot quite identify what causes it to be visible.

signature.asc
Description: Digital signature

_______________________________________________
Babel-users mailing list
Babel-users@lists.alioth.debian.org
http://lists.alioth.debian.org/cgi-bin/mailman/listinfo/babel-users